UNISONIC TECHNOLOGIES CO., LTD M2136 LINEAR INTEGRATED CIRCUIT ULTRA WIDE BAND, HIGH SLEW RATE SINGLE OPERATIONAL AMPLIFIER SOP-8 DESCRIPTION The UTC M2136 is ultra fast single operational amplifiers with low operating voltage (±1.35V) designed for applications requiring wide bandwidth and high slew rate. Because of low operating voltage and low operating current，it is also apply to portable communication items. The high speed of this operational amplifier make them useful in high speed analog and digital signal processor, line driver and active filters, HDTV, industrial measurement equipment and others. TSSOP-8 FEATURES *Input Offset Voltage Balance *Operating Voltage: ±1.35V ~ ±6V *Uitra Wide Band: 200MHz Typ. *High Slew Rate: 45V/μs Typ. *Low Operating Current: 0.63mA Typ. ORDERING INFORMATION Ordering Number Lead Free M2136L-S08-R M2136L-S08-T M2136L-P08-R Halogen Free M2136G-S08-R M2136G-S08-T M2136G-P08-R www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., LTD Package Packing SOP-8 SOP-8 TSSOP-8 Tape Reel Tube Tape Reel 1 of 4 QW-R105-020,Ba M2136 LINEAR INTEGRATED CIRCUIT PIN CONFIGURATION EQUIVALENT CIRCUIT V+ -INPUT OUTPUT +INPUT V- UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R105-020,Ba M2136 LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER Supply Voltage Differential Input Voltage Power Dissipation SYMBOL V+/VVID TSSOP-8 SOP-8 PD Ambient Operating Temperature Storage Temperature RATINGS ±6.75 ±3 250 300 -40～+85 -50～+125 TOPR TSTG UNIT V V mV °C °C ELECTRICAL CHARACTERISTICS (V+/V-=±2.5V,Ta=25°C) PARAMETER Operating Voltage Input Offset Voltage Input Bias Current Input Offset Current Large Signal Voltage Gain SYMBOL V+/VVIO IB IIO Av TEST CONDITION Rs≤0Ω RL≥10kΩ Input Common Mode Voltage Range VICM Common Mode Rejection Ratio CMR +SVR -SVR -1V ≤ Vcm ≤ +1V Maximum Output Voltage Swing VOM RL=1kΩ Operating Current Slew Rate Gain-Bandwidth Product Phase Margin Unity Gain-Bandwidth Icc SR GB ΦM fT RL=∞(all Amp.) Av = 0 dB 60dB‧500kHz 40dB 40dB Supply Voltage Rejection Ratio UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT ±1.35 ±2.50 ±6.00 V 1.0 5.0 mV 0.5 2.0 μA 20 200 nA 65 75 dB 1.2 1.5 V -1.2 -1.5 45 60 dB 70 100 dB 50 60 1.1 1.4 V -0.9 -1.2 0.63 0.82 mA 45 V/μs 120 200 MHz 25 deg 40 MHz 3 of 4 QW-R105-020,Ba M2136 LINEAR INTEGRATED CIRCUIT OFFSET ADJUSTMENT METHOD V+ Rp=200Ω Rp 1 2 - 8 7 6 3 + 4 VNote: The electrical characteristics change a little, in case the Rp is connected. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R105-020,Ba