OPLINK LLCC20041C Low loss cwdm Datasheet

Green Low Loss CWDM
LLCC Series
Product Description
Oplink’s Green Low Loss Coarse Wavelength Division Multiplexer is designed to
meet industrial stringent size and loss requirement. Based on Thin-Film-Filter (TFF)
and Micro-optics, this low loss CWDM features small form factor, ultra low insertion
loss, high channel isolation, and unparallel reliability. The technology is a lead-free
packaging platform and no epoxy in the optical path. The Green Low Loss CWDM
is Telcordia GR-1221and GR-1209 qualified, and complied with industry green initiatives such as RoHS and WEEE.
Performance Specificationns
Typical
Min
Center Wavelength λC
Refer to Channel Plan Below
nm
 Small Form Factor
20
nm
 Environmental Green Plan Compliance
nm
 Ultra-Low Insertion Loss
nm
 High Reliability
Channel Spacing
13
Channel Passband
Insertion Loss
within Passband 1)
Unit
15
1260
1310 Upgrade Passband
Max
Features
LLCC Series
1360
4ch CWDM
0.8
1.0
8ch CWDM
1.0
1.5
CWDM Upgrade (4ch CWDM only)
1.0
1.3
1310 Upgrade
0.6
0.8
0.3
0.5
Passband Ripple
 High Channel Isolation
dB
 RoHS 6 Compliant
dB
Adjacent Channel Isolation
30
40
dB
Non-adjacent Channel Isolation
45
50
dB
1310 Upgrade Isolation over CWDM Bands
40
45
dB
CWDM Upgrade Isolation over CWDM Bands (4ch CWDM only)
13
15
dB
Return Loss
45
50
dB
Directivity
55
0.20
dB
Polarization Mode Dispersion (PMD)
0.20
ps
300
mW
Operating Power
Operating Temperature
-5 to +70
°C
Storage Temperature
-40 to +85
°C
Package
Dimensions
Applications
 WDM System for Metro/Access
Market
dB
Polarization Dependent Loss (PDL)
Fiber Type
 Epoxy-Free Optical Path
Corning SMF-28
3)
Standard (250 or 900µm fiber jacket)
58.0 x 30.0 x9.6
Compact (250µm fiber jacket only)
52.0 x 27.5 x 7.6
mm
Notes:
[1] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified.
[2] All the parameters are without connectors.
[3] The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specified
Channel Plan
1471.0
1491.0
1511.0
1531.0
1551.0
1571.0
1591.0
1611.0
R04.20081119
Green Low Loss CWDM
LLCC Series
Mechanical Drawing / Package Dimensions (dimension in mm)
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
Standard Package
Compact Package
Note: port assignment will vary due to different configuration, please contact Oplink’s sales department for further information.
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
LLCC
0
2
Spacing
1310 Upg Port
20 nm = 2
W/O Upg = 0
W/ Upg = 1
0
Fiber Length*
CWDM Upg Port
0.5 meter= H
1.0 meter= 1
1.5 meter= 5
2.0 meter= 2
8ch CWDM = 0
4ch W/O Upg = 1
4ch W/ Upg = 2
Fiber Jacket
250 μm bare fiber = 1
900 μm loose tube = 2
Package
Channel Plan
Standard package = S
Compact package = C
8ch CWDM=00
4ch CWDM 1471~1531 = 01
4ch CWDM 1551~1611 = 02
4ch CWDM 1511~1571 = 03
4ch CWDM 1471/14911/1591/1611 = 04
Connector
Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC = 9
MU = A
*The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer.
R04.20081119
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules
Similar pages