(1/2) Common Mode Filters(SMD) For High-speed Differential Signal Line Conformity to RoHS Directive MCZ Series MCZ1210AH Type MCZ 1210 AH 360 T (1) (2) (3) (4) (5) 0.7 to 0.75 Weight: 3mg 0.3±0.1 0.5 0.55±0.1 PRODUCT IDENTIFICATION 0.25 Dimensions in mm CIRCUIT DIAGRAMS (1) Series name (2) Dimensions L×W (3) Product identification number (4) Impedance[at 100MHz] 360: 36Ω (5) Packaging style T: Taping ・No polarity TEMPERATURE RANGE Operating RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260˚C Natural cooling 230˚C 180˚C 150˚C Preheating 60 to 120s 0.3 1.0±0.15 1.25±0.15 APPLICATIONS • High speed interface(LVDS and USB2.0) in electronics devices. • Digital cellular phones, PCs, DSCs, portable game machines, etc. SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERNS 0.5±0.1 FEATURES • Compact sized multilayer common mode filter. • By providing wide bandwidth for differential mode, this product has almost no effect for high-speed differential signals and can suppress the radiated emission. Soldering 30 to 60s Time(s) –25 to +85°C PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 4000 pieces/reel HANDLING AND PRECAUTIONS • Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150°C. • After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. • Do not expose the inductors to stray magnetic fields. • Avoid static electricity discharge during handling. • When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350°C. Soldering time should not exceed 3 seconds. • This product does not apply to flow soldering construction method. • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 001-03 / 20100930 / e9712_mcz1210ah.fm (2/2) ELECTRICAL CHARACTERISTICS Common mode impedance (Ω ) [100MHz] 36±25% 90±25% Part No. MCZ1210AH360T MCZ1210AH900T DC resistance (Ω )max.[1 line] 1.00 1.75 Rated current Idc(mA)max. 200 100 Rated voltage Edc(V)max. 5 5 Insulation resistance (MΩ )min. 10 10 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 10000 Impedance(Ω) 1000 900 Common mode 360 Common mode 100 10 1 1 900 Differential mode 10 360 Differential mode 100 1000 Frequency (MHz) 10000 • All specifications are subject to change without notice. 001-03 / 20100930 / e9712_mcz1210ah.fm