EPCOS B84298A0042L002 Installation accessory Datasheet

Installation Accessories
Series/Type:
B84298A0042L
Date: January 2004
 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical
and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed.
Installation accessories
B84298A0042L
Flexible connector fittings, nominal width 25 mm
Dimensional drawing
Available lengths:
L1
Increment
Tolerance
6 up to 100 cm
>100 up to 400 cm
>400 up to 500 cm
>500 up to 600 cm
>600 up to 980 cm
2 cm
5 cm
5 cm
10 cm
20 cm
±5 mm
±5 mm
±5 mm
±10 mm
±10 mm
Installation of filters with internal thread PG 29
Note:
Use new RF gaskets after replacing connector
fitting.
Ordering code for replacement RF gaskets
(per set): B84298M0029C901
2
Ordering code
B84298A0042L***
*** = required length
Example for length 24 cm:
B84298A0042L024
Similar pages