10 BASE-T ETHERNET SMD FILTER P/N: FS2022C: APPLY TO GENERIC IC A. GENERAL SPECIFICATIONS: 1. DESIGNED FOR 10 BASE-T APPLICATION. 2. FULLY COMTATIBLE WITH IEEE 802.3 STANDARD. 3. 16-PIN SMD LOW PROFILE PACKAGE. 4. OPERATION TEMP: 0°C TO 70°C. 5. STORAGE TEMP RANG: -25°C TO +125°C. 5°C: B. ELECTRICAL SPECIFICATIONS @ 25° 5° 1. TURN RATIO: TX=1CT:1CT, RX=1.41CT:1CT 2. HI-POT: 1800 Vrms 3. CUT-OFF FREQ: 17 MHz +/- 1.5MHz 4. INSERTION LOSS (1-10MHz):-1.0dB MAX (TX); (5-10MHz): -1.2dB MAX (RX) 5. ATTENUATION 20MHz 25MHz 30MHz 40MHz TRANSMITTER -7 -19 -30 -32 RECEIVER -6 -14 -20 -31 (dB MIN) 6. RETURN LOSS: FREQUENCY TX RX 1-10MHz -15 (dB MIN) 5-10MHz -12.5 (dB MIN) 7. DIFFERENTIAL TO COMMON MODE REJECTION: FREQUENCY TX RX 30-100MHz -30 -24 (dB MIN.) 8. CROSSTALK ATTEN (1-10 MHz): -30 dB (MIN) C. DIMENSIONS & SCHEMATIC& MARKING: (unit mm) Prepared :Xu DePing Drawing no.:Filter Approved: Xu Wenbin REV.:0 Page : 1/1 Date : 2000/6/21