MBR10H100, MBRF10H100 & MBRB10H100 ITO-220AC (MBRF10H90, MBRF10H100) 0.188 (4.77) 0.172 (4.36) 0.405 (10.27) 0.383 (9.72) TO-220AC (MBR10H90, MBR10H100) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.185 (4.70) 0.415 (10.54) MAX. 0.175 (4.44) 0.154 (3.91) 0.370 (9.40) 0.360 (9.14) 0.148 (3.74) DIA. 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.676 (17.2) 0.646 (16.4) 0.600 (15.5) 0.580 (14.5) 0.350 (8.89) 0.330 (8.38) 0.145 (3.68) 0.135 (3.43) 0.410 (10.41) 0.390 (9.91) 0.350 (8.89) 0.330 (8.38) 0.635 (16.13) 0.625 (15.87) PIN 1 2 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 1.148 (29.16) 1.118 (28.40) 0.160 (4.06) 0.140 (3.56) 2 0.603 (15.32) 0.573 (14.55) PIN 1 PIN 1 0.560 (14.22) 0.530 (13.46) PIN 1 CASE 0.105 (2.67) 0.037 (0.94) 0.027 (0.68) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) 0.110 (2.80) 0.100 (2.54) 0.060 (1.52) 0.110 (2.79) 0.100 (2.54) PIN 2 0.131 (3.39) DIA. 0.122 (3.08) PIN 2 0.037 (0.94) 0.027 (0.69) 0.205 (5.20) 0.195 (4.95) 0.022 (0.55) 0.014 (0.36) TO-263AB (MBRB10H90, MBRB10H100) 0.022 (0.56) 0.014 (0.36) 0.190 (4.83) 0.411 (10.45) 0.380 (9.65) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) 0.245 (6.22) MIN Mounting Pad Layout TO-263AB K 0.42 (10.66) 0.047 (1.19) 1 Dimensions in inches and (millimeters) 0.63 (17.02) 0.055 (1.40) 0.360 (9.14) 0.320 (8.13) 0.33 (8.38) K 2 0.624 (15.85) 0.591 (15.00) 0-0.01 (0-0.254) 0.110 (2.79) 0.090 (2.29) 0.027 (0.686) 0.037 (0.940) 0.105 (2.67) 0.08 (2.032) 0.24 (6.096) 0.12 (3.05) 0.095 (2.41) 0.021 (0.53) 0.014 (0.36) PIN 1 PIN 2 0.205 (5.20) K - HEATSINK 0.140 (3.56) 0.110 (2.79) 0.195 (4.95) Features Mechanical Data • Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 • Metal silicon junction, majority carrier conduction • Low power loss, high efficiency • Guardring for overvoltage protection • For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Case: JEDEC TO-220AC, ITO-220AC & TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250°C/10 seconds, 0.25" (6.35mm) from case (TO-220AC & ITO-220AC) at terminals (TO-263AB) Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 oz., 2.24 g Packaging Codes: see next page www.kersemi.com 1 MBR10H100, MBRF10H100 & MBRB10H100 Maximum Ratings (TC = 25°C unless otherwise noted) Parameter Symbol MBR10H90 MBR10H100 Unit Maximum repetitive peak reverse voltage VRRM 90 100 V Working peak reverse voltage VRWM 90 100 V Maximum DC blocking voltage VDC 90 100 V Maximum average forward rectified current IF(AV) 10 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 250 A Peak repetitive reverse current at tp = 2µs, 1KHZ IRRM 0.5 A Voltage rate of change (rated VR) dv/dt 10,000 V/µs TJ, TSTG –65 to +175 °C Operating junction and storage temperature range (1) 4500 3500(2) 1500(3) V Symbol Value Unit 25°C 125°C 25°C 125°C VF 0.77 0.64 0.88 0.73 V TJ = 25°C TJ = 125°C IR 4.5 6.0 µA mA RMS Isolation voltage (MBRF type only) from terminals to heatsink with t = 1 second, RH ≤ 30% Electrical Characteristics (T C = 25°C unless otherwise noted) Parameter Maximum instantaneous forward voltage at(4): IF = IF = IF = IF = 10A, 10A, 20A, 20A, TC = TC = TC = TC = Maximum reverse current at working peak reverse voltage(4) Thermal Characteristics (T C VISOL = 25°C unless otherwise noted) Parameter Typical thermal resistance Symbol MBR MBRF MBRB Unit RθJC 2.7 5.8 2.7 °C/W Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset (2) Clip mounting (on case), where leads do overlap heatsink (3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.19”) (4) Pulse test: 300µs pulse width, 1% duty cycle Ordering Information Product Case Package Code MBR10H90 - MBR10H100 TO-220AC 45 Anti-Static tube, 50/tube, 2K/carton MBRF10H90 - MBRF10H100 ITO-220AC 45 Anti-Static tube, 50/tube, 2K/carton MBRB10H90 - MBRB10H100 TO-263AB 31 45 81 13” reel, 800/reel, 4.8K/carton Anti-Static tube, 50/tube, 2K/carton Anti-Static 13” reel, 800/reel, 4.8K/carton www.kersemi.com 2 Package Option MBR10H100, MBRF10H100 & MBRB10H100 20 300 250 16 200 MBR MBRB 12 150 8 100 4 50 MBRF 0 0 50 0 150 100 180 IR - Instantaneous Reverse Current (µA) 100 TJ = 175°C 10 TJ = 125°C TJ=150°C TJ = 100°C 1.0 TJ = 25°C 0.1 0.01 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.0 Fig. 5 - Typical Junction Capacitance Per Leg 10000 TJ = 150°C 1000 TJ = 125°C 100 TJ = 100°C 10 1.0 TJ = 25°C 0.1 0.01 20 40 60 80 100 Fig. 6 - Typical Transient Thermal Impedance Per Leg 10000 Transient Thermal Impedance (°C/W) 100 1000 100 10 0.1 100 10 1 10 100 10 1 0.1 0.01 0.1 1 10 www.kersemi.com 3