EKI-5526/I 16-port Fast Ethernet ProView Switch Features Communicates with SCADA software via Modbus/TCP Communicates with NMS (Networking management system) via SNMP Port-based QoS for deterministic data transmission -40~75°C operating temperature range (EKI-5526I only) 12 ~48 VDC (8.4~52.8 VDC) wide-range power input EMS level 3 protection for extreme outdoor environments IEEE 802.3az Energy Efficient Ethernet (EEE) Jumbo Frame Support (Up to 2048 Bytes) Supports redundant 12~48VDC power input and P-Fail relay Loop detection RoHS COMPLIANT 2011/65/EU Introduction The EKI-5526/I are the world’s first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with the NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. EKI-5526/I switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75°C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance. Specifications Environment Communications Standard LAN Transmission Distance Transmission Speed IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab 10/100Base-T(X) Up to 100 m Up to 100 Mbps Interface Connectors LED Indicators 16 x RJ45 6-pin removable screw terminal (power & relay) P1, P2, P-Fail, Loop detection 10/100T(X): Link/Activity, Speed Switch Properties MAC Table Size Packet Buffer Size Switching Capacity Jumbo Frame 8K 128K bit 3.2 Gbps 2048bytes Power Power Consumption Power Input Fault Output Max. 3.84 W 12~48 VDC (8.4~52.8 VDC), redundant dual inputs 1 Relay Output Mechanism Dimensions (W x H x D) 74 x 120 x 84 mm Enclosure IP30, metal shell with solid mounting kits Mounting DIN-Rail, Wall Operating Temperature EKI-5526: -10~60°C (14~140°F) EKI-5526I: -40~75°C (-40~167°F) Storage Temperature -40 ~ 85°C (-40 ~ 185°F) Operating Humidity 10 ~ 95% (non-condensing) Storage Humidity 10 ~ 95% (non-condensing) MTBF 4,653,552 hours Certification Safety EMI EMS Shock Freefall Vibration IEC/EN60950, UL60950, UL508, Class 1 Division 2, ATEX FCC Part 15 Subpart B Class A, EN 55011/55022 Class A EN 61000-4-2 (Level 3) EN 61000-4-3 (Level 3) EN 61000-4-4 (Level 3) EN 61000-4-5 (Level 3) EN 61000-4-6 (Level 3) EN 61000-4-8 (Level 3) IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6 Ordering Information EKI-5526 EKI-5526I 16-port Fast Ethernet ProView Switch 16-port Fast Ethernet ProView Switch with Wide Temperature Protection Reverse Polarity Overload Current Present Present Industrial Ethernet Solutions All product specifications are subject to change without notice Date updated: 26-Jan-2015 EKI-5526/I Mounting Dimensions Unit: mm [inch] 1.315 33.4 1.400 35.6 .439 11.1 2.913 74 3.661 93 2.913 74 .591 15 1.215 30.9 2.024 51.4 3.307 84 1.600 40.6 2.913 74 .354 9 3.661 93 .386 9.8 1.378 35 1.850 47 4.724 120 4.724 120 5.110 129.8 1.496 38 .461 11.7 .646 16.4 Online Download www.advantech.com/products 4.724 120