Magnetics Make Possible Surface Mount Common Mode Chokes MODEL HM86 Features Operating Temperature Range -40°C to +125°C Ambient Temperature, Maximum +85°C Temperature Rise, Maximum 40°C RoHS Compliant Schematics Specifications @ 25°C Inductance (1-2 or 4-3) μH ±30% Rated Current (Max.) Amps DC Resistance (1-2 or 4-3) mΩ Typ. Leakage Inductance (μH) Max. Interwinding Capacitance pF Typ. Figure Height mm Max. HM86-10025LF 25.0 5.35 3.10 0.22 2.00 1 5.2 HM86-10040LF 40.0 4.40 3.89 0.34 2.30 1 5.2 HM86-10070LF 70.0 3.60 5.35 0.47 2.50 1 5.2 HM86-10095LF 95.0 2.80 7.97 0.80 2.80 1 5.2 HM86-10150LF 150.0 2.30 16.85 1.25 3.10 1 5.2 HM86-10275LF 275.0 1.85 34.53 1.75 3.40 1 5.2 Part Number HM86-10320LF 320.0 1.60 39.72 2.00 3.60 1 5.2 HM86-10400LF 400.0 1.35 42.73 2.60 3.90 1 5.2 HM86-10500LF 500.0 1.10 57.43 3.30 4.10 1 5.2 HM86-10620LF 620.0 0.94 73.72 4.00 4.30 1 5.2 HM86-10750LF 750.0 0.80 98.34 5.00 4.60 1 5.2 HM86-11100LF 1100.0 0.67 161.2 6.30 4.90 1 5.2 HM86-11300LF 1300.0 0.58 245.5 7.30 5.10 1 5.2 HM86-11600LF 1600.0 0.50 350.5 9.00 5.40 1 5.2 HM86-20035LF 34.9 5.70 4.63 0.31 2.80 2 6.0 HM86-20050LF 50.0 5.10 5.12 0.46 3.05 2 6.0 HM86-20075LF HM86-20105LF HM86-20175LF HM86-20260LF HM86-20310LF HM86-20420LF HM86-20480LF HM86-20620LF HM86-20780LF HM86-20950LF HM86-21250LF HM86-21600LF 75.0 105.0 175.0 260.0 310.0 420.0 480.0 620.0 780.0 950.0 1250.0 1600.0 4.75 3.95 3.10 2.85 2.45 2.00 1.70 1.45 1.20 1.05 0.88 0.75 6.52 7.92 15.9 19.5 25.3 36.8 50.2 62.1 92.3 132.1 192.2 286.5 0.64 0.85 1.30 1.90 2.20 3.00 3.30 4.20 5.10 6.10 7.80 9.60 3.30 3.50 3.70 3.90 4.15 4.40 4.65 4.85 5.10 5.35 5.55 5.80 2 2 2 2 2 2 2 2 2 2 2 2 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 Notes: (1) Inductance, leakage inductance and interwinding capacitance are measured at 100kHz, 0.1Vrms. (2) Leakage inductance is measured at pin-1-2 with N2 (pin 4-3) winding shorted. (3) It is recommended that the temperature of the component (ambient plus temperature rise) does not exceed 125°C under worst case operating conditions. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsmagnetics.com © TT Electronics plc Rev. 01 Surface Mount Common Mode Chokes Make Possible MODEL HM86 Outline Dimensions (mm) Figure 1 Figure 2 Recommended Solder Pad Layouts Packaging Embossed Tape and Reel Standard: Diameter: Reel: Capacity: = 13” (330.2mm) Case size 1 = 800 units Case size 2 = 600 units Ordering Information HM86 - 1 1100 LF TR Model Series Case Size : Case 1 or Case 2 Inductance Code: Tape & Reel Packing Lead Free General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsmagnetics.com © TT Electronics plc Rev. 01