Document 438-1 Shielded Power Inductors – LPS3008 • Very low DCR; excellent current handling • Only 0.8 mm tall; 3.0 × 3.0 mm footprint Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 22 – 25 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Isat (A)5 Irms (A)6 DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20°C 40°C Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise LPS3008-561MR_ LPS3008-801MR_ LPS3008-102MR_ LPS3008-152MR_ LPS3008-222MR_ 0.56 0.80 1.0 1.5 2.2 0.072 0.092 0.125 0.134 0.175 330 255 220 170 150 1.8 1.6 1.3 1.1 1.0 2.0 1.7 1.4 1.3 1.1 2.1 1.8 1.5 1.3 1.1 1.4 1.1 0.90 0.87 0.85 2.0 1.6 1.3 1.2 1.1 LPS3008-332MR_ LPS3008-472MR_ LPS3008-562MR_ LPS3008-682MR_ LPS3008-822MR_ 3.3 4.7 5.6 6.8 8.2 0.285 0.350 0.450 0.500 0.600 114 87 78 75 61 0.81 0.68 0.62 0.58 0.52 0.86 0.73 0.67 0.61 0.56 0.88 0.74 0.70 0.63 0.58 0.74 0.68 0.58 0.50 0.45 0.95 0.80 0.73 0.67 0.60 LPS3008-103MR_ LPS3008-123MR_ LPS3008-183MR_ LPS3008-223MR_ LPS3008-333MR_ 10 12 18 22 33 0.650 0.790 1.25 1.50 2.30 56 49 38 35 23 0.46 0.45 0.35 0.29 0.27 0.51 0.48 0.38 0.33 0.30 0.52 0.50 0.40 0.34 0.31 0.42 0.38 0.33 0.29 0.25 0.56 0.50 0.44 0.38 0.32 LPS3008-473MR_ LPS3008-683MR_ LPS3008-104MR_ LPS3008-124MR_ LPS3008-154MR_ 47 68 100 120 150 3.00 4.75 6.85 7.00 8.00 21 18 14 13 11 0.22 0.18 0.15 0.084 0.080 0.23 0.19 0.16 0.094 0.088 0.24 0.20 0.16 0.10 0.092 0.21 0.175 0.160 0.140 0.130 0.27 0.23 0.21 0.190 0.175 LPS3008-184MR_ 180 9.00 10 0.070 0.078 0.082 0.120 0.160 1. Please specify termination and packaging codes: LPS3008-104MRC Termination: R = RoHS compliant matte tin over nickel over silver. Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each) from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to 33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of 220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and to order, contact Coilcraft or visit http://order.coilcraft.com. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 438-1 Revised 08/02/13 © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 438-2 Shielded Power Inductors – LPS3008 Series Typical L vs Current Typical L vs Frequency 1000 1000 330 µH 100 100 µH Inductance (µH) Inductance (µH) 330 µH 33 µH 10 10 µH 3.3 µH 1 0.1 1 0.1 33 µH 10 µH 10 3.3 µH 1.0 µH 1 1.0 µH 0.01 100 µH 100 10 0.1 0.01 1 0.1 Current (A) 10 Frequency (MHz) Current Derating 0.116 ±0.003* 2,95 ±0,076 120 100 90 XXX X 80 0.116 ±0.003* 2,95 ±0,076 Winding direction 70 Dash number 60 Internal code 50 40 30 20 Isat Irms 10 0 -40 -20 0.0315 max * 0,8 25°C Percent of rated Current 110 0 20 Recommended Land Pattern 0.045 0.040 1,14 1,02 40 60 80 100 120 140 Ambient temperature (°C) 0.120 0.100 0.040 3,05 2,54 1,02 0.0275 0,70 0.070 1,78 0.035 0,89 Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth NOTE NEW PART ORIENTATION Parts are rotated 90° in the packaging tape compared to previous versions of this product. NEW OLD 123 123 123 123 123 0.110 2,79 are of the case not including * Dimensions the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch / 0,13 mm). 0.130 3,30 Dimensions are in inches mm 123 US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 438-2 Revised 08/02/13 © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.