IF filter for intercarrier application (IF= 38.0 MHz. standard B/G-CCIR, D/K-OIRT) К2011 4x2.54 2.6 8.6max 2 3 4 5 6 18.7max 16.8 2 5 3 6 3.5max 4 1.0 3.0 2.8 Pin configuration 2 – Input 3 - Input - ground 4 - Chip carrier - ground 5 - Output 6 - Output D0.5 Package SIP6M Characteristics (measuring conditions: Т=25°С, Zsource=50 Ω, Zload=2kΩ//3pF) Parameter Insertion attenuation at (reference level for the following data) Relative attenuation: Picture carrier Color carrier Sound carrier Lower sidelobe Adjacent picture carrier Adjacent sound carrier Upper sidelobe min. max. type unit 16,7 15,2 dB 7,5 1,8 3,2 15,5 17 6,5 0,8 2,2 14 15,5 44 50 50 44 42 dB dB dB dB dB dB dB dB dB dB 2,0 3,5 0,5 0,6 2,5 0,7 dB dB dB 40 46 dB 40 52 dB 1,3//13,0 3,0//5,0 kΩ//pF kΩ//pF 0 -50 -72 ns ns ppm/°K 36,5MHz 38,0 MHz 33,57 MHz 33,3 MHz 31,5 MHz 32,5 MHz 15,0-30,0 MHz 30,0 MHz 39,5 MHz 39,5-42,0 MHz 42,0-56 MHz 5,5 13 14 40 45 40 40 40 Amplitude ripple: 31,4-31,6 MHz 32,4-32,6 MHz 33,57-37,0 MHz Reflected wave signal suppression 1,2 -6,0 µs after main pulse ( test pulse: 250 ns, carrier frequency 36,5 MHz) Feedthrough signal suppression 0,9 – 1,2 µs before main pulse (test pulse: 250 ns, carrier frequency 36,5 MHz) Impedance at 36,5MHz Input Zin=Rin //Cin Output Zout =Rout //Cout Group delay predistortion (reference frequency 38,0 MHz) 33,57MHz 35,9 MHz Temperature coefficient of frequency Frequency response Amplitude Frequency Amplitude GD Frequency Maximum ratings Min ambient temperature Max ambient temperature Min storage temperature Max storage temperature DC voltage ( between any terminals) AC voltage ( between any terminals) -10°С 55°С -60°С 55°С 12 V 10 V