Frequency Multiplier (x2 to x48) Model BXMF1015 (125 - 150 MHz) Features • • • • • • Fully Customizable Housing Fast 90 nsec Switching Speed High Output +10 dBm Drive Level 2 Programmable Outputs Null Output Mode x2 through x48 Multiplication Description Typical Specifications This Multiplier provides the system designer with a compact, fast-switching building block for LO multiplication applications. An internal solid-state multiplier provides frequency multiplication by your choice of a factor of 2, 4, 8, or up to 48, all from a single input frequency. Input Frequency Input Level Output Frequency Output Level Bandwidth Switching Speed Harmonics DC Power The multiplier is designed for airborne applications and has field-replaceable RF connectors. The entire assembly is designed to be slid into a channel for systems installation without the need to solder wires or screw on connectors. Temp Range This design incorporates single-stage active doublers, amplifiers, SRD multipliers, power splitters, bandpass filtering, voltage conditioning, and BIT circuits and provides excellent phase noise performance. 125 to 150 MHz +10 dBm 250 MHz to 7200 MHz +10 dBm 2% 90 nsec -60 dBc +28 V @ 275 mA +15 V @ 75 mA 0oC to +75oC All specifications above measured at 25 oC Dimensions and Connections 12” L x 13” W x 1” H Applications • • • • Synthesizer Building Block SIGINT ELINT EW Revision 7/5/2012 Spectrum Microwave, Inc. • P: 888.553.7531 • F: 888.553.7532 E-mail: salesSpectrumsMicrowave.com • www.SpectrumMicrowave.com