UTC DTC143XG-T92-B Npn digital transistor built-in resistors) Datasheet

UNISONIC TECHNOLOGIES CO., LTD
DTC143X
NPN DIGITAL TRANSISTOR
NPN DIGITAL TRANSISTOR
(BUILT-IN RESISTORS)
„
3
1
2
SOT-23
1
2 1
SOT-323
SOT-523
2
FEATURES
* Built-in bias resistors that implies easy ON/OFF applications.
* The bias resistors are thin-film resistors with complete isolation to
allow negative input.
„
3
3
1
TO-92
EQUIVALENT CIRCUIT
1
TO-92SP
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
DTC143XL-AE3-R
DTC143XG-AE3-R
DTC143XL-AL3-R
DTC143XG-AL3-R
DTC143XL-AN3-R
DTC143XG-AN3-R
DTC143XL-T92-B
DTC143XG-T92-B
DTC143XL-T92-K
DTC143XG-T92-K
DTC143XL-T92-R
DTC143XG-T92-R
DTC143XL-T9S-K
DTC143XL-T9S-K
DTC143XL-AE3-R
(1)Packing Type
(2)Package Type
(3)Lead Free
„
Package
SOT-23
SOT-323
SOT-523
TO-92
TO-92
TO-92
TO-92SP
Pin Assignment
1
2
3
E
B
C
E
B
C
E
B
C
E
B
C
E
B
C
E
B
C
E
B
C
Packing
Tape Reel
Tape Reel
Tape Reel
Tape Box
Bulk
Tape Reel
Bulk
(1) B: Tape Box, K: Bulk, R: Tape Reel
(2) AE3: SOT-23, AL3: SOT-323, AN3: SOT-523,
T92: TO-92, T9S: TO-92SP
(3) G: Halogen Free, L: Lead Free
MARKING(For SOT Package)
CE3X
X: Halogen Free
X: Lead Free
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
1 of 2
QW-R206-079.Da
DTC143X
„
NPN DIGITAL TRANSISTOR
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
VCC
VIN
IO
IC(MAX.)
RATINGS
UNIT
-50
V
-7 ~ +20
V
100
mA
Output Current
100
SOT-23/SOT-323
200
SOT-523
150
Power Dissipation
PD
mW
T0-92
625
TO-92SP
550
Junction Temperature
TJ
150
°C
Storage Temperature
TSTG
-55 ~ +150
°C
Note: 1.Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
Supply Voltage
Input Voltage
„
ELECTRICAL CHARACTERISTICS (TA =25°C)
PARAMETER
SYMBOL
VI(OFF)
Input Voltage
VI(ON)
Output Voltage
VO(ON)
Input Current
II
Output Current
IO(OFF)
DC Current Gain
GI
Input Resistance
R1
Resistance Ratio
R2/R1
Transition Frequency
fT
Note: Transition frequency of the device
TEST CONDITIONS
VCC=5V, IO=100μA
VO=0.3V, IO=20mA
IO/II=10mA/0.5mA
VI=5V
VCC=50V, VI=0V
VO=5V, IO=10mA
VCE=10V, IE=−5mA,f=100MHz (Note)
MIN
TYP
MAX
0.3
UNIT
0.1
0.3
1.8
0.5
V
mA
μA
4.7
2.1
250
6.11
2.6
KΩ
2.5
30
3.29
1.7
V
MHz
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 2
QW-R206-079.Da
Similar pages