NTE30088 & NTE30089 Light Emitting Diode (LED) SOT−23 Surface Mount Features: D Available in 2 Different Colors: NTE30088 (Super Red, GaAlAs/GaAs) NTE30089 (Yellow, GaAsP/GaP) D 3.0mm x 1.6mm SOT−23 SMT LED, 1.0mm Thickness D Single Color Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) DC Forward Current, IF NTE30088 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA NTE30089 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA Peak Forward Current (Note 1), IF(peak) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V Power Dissipation, PD NTE30088 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110mW NTE30089 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90mW Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −30° to +85°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40° to +100°C Reflow Soldering (Preheat +150° to +180°C 60sec to 120sec, 10sec max) . . . . . . . . . . . . . . +260°C Note 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Electrical/Optical Characteristics: (TA = +25°C unless otherwise specified) Parameter Symbol Viewing Angle of Half Power 2Q 1/2 Luminous Intensity NTE30088 IV Test Conditions Min Typ Max Unit IF = 20mA − 140 − degrees IF = 20mA, Note 2 7 12 − mcd 2 4 − mcd − 1.80 2.40 V − 2.10 2.80 V VR = 5V − − 10 μA IF = 20mA − 660 − nm − 589 − nm NTE30089 Forward Voltage NTE30088 VF IF = 20mA NTE30089 Reverse Current IR Peak Emission Wave Length NTE30088 λP NTE30089 Note 2. Tolerance: 30% measured with EXELTRON 2001 Electrical/Optical Characteristics (Cont’d): (TA = +25°C unless otherwise specified) Parameter Symbol λd (HUE) Dominate Wavelength NTE30088 Test Conditions Min Typ Max Unit IF = 20mA, Note 3 − 643 − nm − 585 − nm − 30 − nm − 35 − nm NTE30089 Δλ Spectral Line Half Width NTE30088 IF = 20mA NTE30089 Note 3. The dominate wavelength, λd, is derived from the CIE Chromatic Diagram and represents the color of the device. .016 (0.48) 2 1 .098 (2.5) Max 3 .037 (0.95) .074 (1.9) .051 (1.3) .118 (3.0) Max .043 (1.1) .007 (0.2) NTE30088 NTE30089 1 NC NC 2 A K 3 K A