EMA3 / UMA3N / FMA3A PNP -100mA -50V Complex Digital Transistors (Bias Resistor Built-in Transistors) Datasheet lOutline Parameter Tr1 and Tr2 VCEO -50V -100mA 4.7kW IC(MAX.) R1 EMT5 UMT5 (5) (1) (4) (2) EMA3 (SC-107BB) UMA3N SOT-353 (SC-88A) (1) (2) (5) (4) (3) FMA3A (SC-74A) lInner circuit EMA3 / UMA3N Base (3) (4) Collector lApplication (1) (4) (5) lFeatures with complete isolation to allow negative biasing of the input. They also have the advantage of completely eliminating parasitic effects. 6) Only the on/off conditions need to be set for operation, making the circuit design easy. 7) Lead Free/RoHS Compliant. (2) (3) SMT5 1) Built-In Biasing Resistors. 2) Two DTA143T chips in one package. 3) Emitter-common type. 4) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see inner circuit). 5) The bias resistors consist of thin-film resistors (3) Emitter (2) FMA3A Base (1) Base (3) (5) Collector (2) Collector Emitter (4) Base (5) (1) Collector Interface circuit, Driver circuit lPackaging specifications Package Package size (mm) Taping code EMA3 EMT5 1616 T2R 180 8 8,000 A3 UMA3N UMT5 2021 TR 180 8 3,000 A3 FMA3A SMT5 2928 T148 180 8 3,000 A3 Part No. www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 1/6 Basic Reel size Tape width ordering (mm) (mm) unit (pcs) Marking 2012.06 - Rev.B Data Sheet EMA3 / UMA3N / FMA3A lAbsolute maximum ratings (Ta = 25°C) <For Tr1 and Tr2 in common> Parameter Symbol Values Unit Collector-base voltage VCBO -50 V Collector-emitter voltage VCEO -50 V Emitter-base voltage VEBO -5 V IC(MAX.) *1 -100 mA 150 (Total) *3 mW 300 (Total) *4 mW Tj 150 °C Tstg -55 to +150 °C Collector current Collector Power dissipation EMA3 / UMA3N PC FMA3A Junction temperature Range of storage temperature *2 lElectrical characteristics(Ta = 25°C) <For Tr1 and Tr2 in common> Parameter Symbol Collector-base breakdown voltage BVCBO Collector-emitter breakdown voltage Emitter-base breakdown voltage Min. Typ. Max. Unit IC= -50mA -50 - - V BVCEO IC= -1mA -50 - - V BVEBO IE= -50mA -5 - - V Collector cut-off current ICBO VCB = -50V - - -0.5 mA Emitter cut-off current IEBO VEB = -4V - - -0.5 mA VCE(sat) IC / IB= -5mA / -0.25mA - - -0.3 V DC current gain hFE VCE= -5V , IC= -1mA , 100 250 600 - Input resistance R1 - 3.29 4.7 6.11 kW Transition frequency fT *1 VCE = -10V, IE = 5mA, f = 100MHz - 250 - MHz Collector-emitter saturation voltage Conditions *1 Characteristics of built-in transistor *2 Each terminal mounted on a reference footprint *3 120mW per element must not be exceeded. *4 200mW per element must not be exceeded. www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 2/6 2012.06 - Rev.B Data Sheet EMA3 / UMA3N / FMA3A lElectrical characteristic curves(Ta = 25°C) Fig.2 Grounded emitter output characteristics Fig.1 Grounded emitter propagation characteristics -10 -100 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : Ic (mA) VCE= -5V -1 -0.1 Ta=100ºC 25ºC -40ºC -0.01 -0.001 0 -0.5 -1 -1.5 -2 BASE TO EMITTER VOLTAGE : VBE (V) IB= Ta=25ºC -500μA -450μA -80 -400μA -350μA -300μA -60 -250μA -200μA -40 -150μA -100μA -20 -50μA 0 0 -2 -4 -6 -8 0A -10 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.4 Collector-emitter saturation voltage vs. Collector Current DC CURRENT GAIN : hFE COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) Fig.3 DC Current gain vs. Collector Current COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 3/6 2012.06 - Rev.B Data Sheet EMA3 / UMA3N / FMA3A lDimensions (Unit : mm) D EMT5 A x c S A Lp Lp HE L E L b A1 y S l1 A e1 e S e b2 Patterm of terminal position areas DIM A1 A b c D E e HE L Lp x y DIM e1 b2 l1 MILIMETERS MIN MAX 0.00 0.10 0.45 0.55 0.17 0.27 0.08 0.18 1.50 1.70 1.10 1.30 0.50 1.50 1.70 0.10 0.30 0.35 0.10 0.10 MILIMETERS MIN MAX 1.25 0.37 0.45 INCHES MIN 0 0.018 0.007 0.003 0.059 0.043 MAX 0.004 0.022 0.011 0.007 0.067 0.051 0.02 0.059 0.004 - 0.067 0.012 0.014 0.004 0.004 INCHES MIN MAX 0.049 - 0.015 0.018 Dimension in mm/inches www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 4/6 2012.06 - Rev.B Data Sheet EMA3 / UMA3N / FMA3A lDimensions (Unit : mm) UMT5 D A e c x Lp L1 A3 S A e e1 l1 y S A1 A b HE E Q S b2 Patterm of terminal position areas DIM A A1 A3 b c D E e HE L1 Lp Q x y DIM e1 b2 l1 MILIMETERS MIN MAX 0.80 1.00 0.00 0.10 0.25 0.15 0.30 0.10 0.20 1.90 2.10 1.15 1.35 0.65 2.00 2.20 0.20 0.50 0.25 0.55 0.10 0.30 0.10 0.10 MILIMETERS MIN MAX 1.55 0.40 0.65 INCHES MIN 0.031 0 MAX 0.039 0.004 0.01 0.006 0.004 0.075 0.045 0.012 0.008 0.083 0.053 0.03 0.079 0.008 0.01 0.004 - 0.087 0.02 0.022 0.012 0.004 0.004 INCHES MIN MAX 0.06 - 0.016 0.026 Dimension in mm/inches www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 5/6 2012.06 - Rev.B Data Sheet EMA3 / UMA3N / FMA3A lDimensions (Unit : mm) SMT5 D A e c L1 Lp HE E Q b A3 x S A y S A1 l1 A e1 e S b2 Patterm of terminal position areas DIM A A1 A3 b c D E e HE L1 Lp Q x y DIM e1 b2 l1 MILIMETERS MIN MAX 1.00 1.30 0.00 0.10 0.25 0.25 0.40 0.09 0.25 2.80 3.00 1.50 1.80 0.95 2.60 3.00 0.30 0.60 0.40 0.70 0.20 0.30 0.20 0.10 MILIMETERS MIN MAX 2.10 0.60 0.90 INCHES MIN 0 MAX 0.051 0.004 0.01 0.01 0.004 0.11 0.059 0.016 0.01 0.118 0.071 0.04 0.102 0.012 0.016 0.008 - 0.118 0.024 0.028 0.012 0.008 0.004 INCHES MIN MAX 0.08 - 0.024 0.035 Dimension in mm/inches www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 6/6 2012.06 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1120A