HI-SINCERITY Spec. No. : Preliminary Data Issued Date : 2001.01.01 Revised Date : 2001.05.21 Page No. : 1/3 MICROELECTRONICS CORP. H78M15AT H78M15BT 3-TERMINAL POSITIVE VOLTAGE REGULATOR Description The H78M15_T series of three-terminal positive regulators are available in the TO-126 package. This regulator can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each device employs internal current limiting, thermal shut-down and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 0.5A output current. Although designed primarily as fixed voltage regulators, this device can be used with external components to obtain adjustable voltages and currents. Description • Output current up to 500mA is available. • Eliminates external compensating circuit. • Built-in current limiter prevents elements from destruction when load is short circuit. • Built-in chip junction temperature limiting circuit protects elements against thermal destruction. • Built-in internal power dissipation limiting circuit protects transistors at output driver. Absolute Maximum Ratings (Ta=25°C) • Input Voltage ................................................................................................................................... 35 V • Total Power Dissipation (Tc=25°C) ................................................................................ Internally limited • Operating Junction Temperature ...................................................................................... 0 °C to 125 °C • Output Current (Tc=25°C) .............................................................................................................. 0.5 A • Lead Temperature (Soldering 10S) .............................................................................................. 230 °C Typical Application Vin 1 H78M15_T Block Diagram 3 Vout Current Generator 2 C1 Series pass Element 1 Input C2 Starting Circuit Reference Voltage 3 Output SOA Protection Error Amplifier Thermal Protection Note : C1 and C2 are required if regulator is located far from power supply filter and load, or oscillation may induced on the loop. H78M15AT, H78M15BT 2 GND HSMC Product Specification HI-SINCERITY Spec. No. : Preliminary Data Issued Date : 2001.01.01 Revised Date : 2001.05.21 Page No. : 2/3 MICROELECTRONICS CORP. Electrical Characteristics • H78M15AT Vin=23V, Io=350mA, 0°C≤Tj≤125°C, PD≤5W, unless otherwise specified Symbol Characteristic Min Typ Max Units Vo Vo 14.55 15 15.45 V Output Voltage (Tj=25°C) 14.4 15 15.6 V Output Voltage (17.5V≤Vin≤30V, 5mA≤Io≤350mA) 10 100 Line Regulation (Tj=25°C, Io=200mA), 17.5V≤Vin≤30V Regline mV 5 50 Line Regulation (Tj=25°C, Io=200mA), 20V≤Vin≤30V 260 Load Regulation (Tj=25°C), 5mA≤Io≤500mA Regload mV 130 Load Regulation (Tj=25°C), 5mA≤Io≤200mA IB 3.2 6 mA Quiescent Current (Tj=25°C) 0.8 Quiescent Current Change (Tj=25°C), 17.5V≤Vin≤30V, Io=200mA mA ∆IB 0.5 Quiescent Current Change (Tj=25°C), 5mA≤Io≤350mA RR 54 dB Ripple Rejection, 18.5V≤Vin≤28.5V, Io=300mA, f=120Hz Vi-Vo Dropout Voltage (Io=500mA, Tj=25°C) 2 V VN 90 160 uV Output Noise Voltage (Tj=25°C), 10Hz≤f≤100KHz Isc 300 mA Short Circuit Current Limit (Tj=25°C), Vin=35V Imax Peak Output Current (Tj=25°C) 700 mA TCVo Average Temperature Coefficient of Output Voltage, Io=5mA -0.8 mV/°C • H78M15BT Vin=23V, Io=350mA, 0°C≤Tj≤125°C, PD≤5W, unless otherwise specified Symbol Characteristic Min Typ Max Units Vo Vo 14.25 15 15.75 V Output Voltage (Tj=25°C) 14.25 15 15.75 V Output Voltage (17.5V≤Vin≤30V, 5mA≤Io≤350mA) 10 120 Line Regulation (Tj=25°C, Io=200mA), 17.5V≤Vin≤30V Regline mV 5 60 Line Regulation (Tj=25°C, Io=200mA), 20V≤Vin≤30V 300 Load Regulation (Tj=25°C), 5mA≤Io≤500mA Regload mV 150 Load Regulation (Tj=25°C), 5mA≤Io≤200mA IB 3.2 6 mA Quiescent Current (Tj=25°C) 1 Quiescent Current Change (Tj=25°C), 17.5V≤Vin≤30V, Io=200mA mA ∆IB 0.6 Quiescent Current Change (Tj=25°C), 5mA≤Io≤350mA RR 54 dB Ripple Rejection, 18.5V≤Vin≤28.5V, Io=300mA, f=120Hz Vi-Vo Dropout Voltage (Io=500mA, Tj=25°C) 2 V VN 90 160 uV Output Noise Voltage (Tj=25°C), 10Hz≤f≤100KHz Isc 300 mA Short Circuit Current Limit (Tj=25°C), Vin=35V Imax Peak Output Current (Tj=25°C) 700 mA TCVo Average Temperature Coefficient of Output Voltage, Io=5mA -0.8 mV/°C H78M15AT, H78M15BT HSMC Product Specification HI-SINCERITY Spec. No. : Preliminary Data Issued Date : 2001.01.01 Revised Date : 2001.05.21 Page No. : 3/3 MICROELECTRONICS CORP. TO-126 Dimension D Marking : I E J K A M HSMC Logo Part Number Date Code α3 B 1 2 3 Product Series α4 G Ink Marking Style : Pin 1.Vin 2.Ground 3.Vout C F L H α1 3-Lead TO-126 Plastic Package HSMC Package Code : T α2 *:Typical Inches Min. Max. *3° *3° *3° *3° 0.1500 0.1539 0.2752 0.2791 0.5315 0.6102 0.2854 0.3039 0.0374 0.0413 DIM α1 α2 α3 α4 A B C D E Millimeters Min. Max. *3° *3° *3° *3° 3.81 3.91 6.99 7.09 13.50 15.50 7.52 7.72 0.95 1.05 DIM F G H I J K L M Inches Min. Max. 0.0280 0.0319 0.0480 0.0520 0.1709 0.1890 0.0950 0.1050 0.0450 0.0550 0.0450 0.0550 *0.0217 0.1378 0.1520 Millimeters Min. Max. 0.71 0.81 1.22 1.32 4.34 4.80 2.41 2.66 1.14 1.39 1.14 1.39 *0.55 3.50 3.86 Notes : 1.Dimension and tolerance based on our Spec. dated Mar. 6,1995. 2.Controlling dimension : millimeters. 3.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 4.If there is any question with packing specification or packing method, please contact your local HSMC sales office. Material : • Lead : 42 Alloy ; solder plating • Mold Compound : Epoxy resin family, flammability solid burning class:UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC. • HSMC reserves the right to make changes to its products without notice. • HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory : • Head Office (Hi-Sincerity Microelectronics Corp.) : 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C. Tel : 886-2-25212056 Fax : 886-2-25632712, 25368454 • Factory 1 : No. 38, Kuang Fu S. Rd., Fu-Kou Hsin-Chu Industrial Park Hsin-Chu Taiwan. R.O.C Tel : 886-3-5983621~5 Fax : 886-3-5982931 H78M15AT, H78M15BT HSMC Product Specification