SMA01 1W DC-DC Unregulated Single Output Converter series Features : 1500VDC I/O isolation 3000VDC I/O isolation(optional) Operating temperature range of -40 ~ +85 Internal SMD technology Built-in EMI filter Cooling by free air convection Non-conductive plastic case Dual in line package Industry standard pinout 100% burn-in test Low cost / High reliability 2 years warranty SELECTION GUIDE ORDER NO. SMA01N-05 SMA01M-05 SMA01L-05 SMA01M-09 SMA01N-09 77% 78% 75% SMA01L-15 SMA01M-15 SMA01N-15 SMA01L-09 9V DC OUTPUT VOLTAGE 5V OUTPUT CURRENT RANGE 0 ~ 200mA EFFICIENCY(Typ.) 77% 79% 77% SMA01L-12 SMA01M-12 SMA01N-12 ORDER NO. without derating 0 ~ 110mA 15V DC OUTPUT VOLTAGE 12V OUTPUT CURRENT RANGE 0 ~ 84mA EFFICIENCY(Typ.) 78% 0 ~ 67mA 80% 78% 79% 79% 77% 21.6 ~ 26.4V 24V 4.5 ~ 5.5V 5V 10.8 ~ 13.2V 12V 21.6 ~ 26.4V 24V 57mA SPECIFICATION RATED POWER OUTPUT 1W RIPPLE & NOISE (max.) Note.2 100mVp-p LINE REGULATION Note.3 1.2% for 1% input variation LOAD REGULATION Note.4 8.0% VOLTAGE ACCURACY 2.0% SWITCHING FREQUENCY(Typ.) 100KHz 4.5 ~ 5.5V 5V VOLTAGE RANGE NORMAL VOLTAGE Full load 265mA No load 32mA 110mA 57mA 265mA 110mA 15mA 11mA 32mA 15mA 11mA PROTECTION (FUSE RECOMMENDED) 500mA 250mA 150mA 500mA 250mA 150mA INPUT CURRENT INPUT 10.8 ~ 13.2V 12V FILTER Capacitor type Momentary OVERLOAD Protection type : Broken Momentary PROTECTION SHORT CIRCUIT Protection type : Broken WORKING TEMP. -40 ~ +90 WORKING HUMIDITY 20% ~ 90% RH non-condensing (Refer to output load derating curve) ENVIRONMENT STORAGE TEMP., HUMIDITY -55 ~ +125 , 10 ~ 95% RH 0.05% / (0 ~ 50 ) TEMP. COEFFICIENT 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes VIBRATION WITHSTAND VOLTAGE I/P-O/P:1.5KVDC I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH ISOLATION RESISTANCE SAFETY & 80pF max. ISOLATION CAPACITANCE EMC EMI RADIATION Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8 light industry level, criteria A EMS IMMUNITY MTBF DIMENSION (L*W*H) 700khrs min. MIL-HDBK-217F(25 WEIGHT 1.7g Mechanical Specification Unit: mm (inch) 12.7 (0.50) 7.62 (0.30) 10.16 (0.40) 7.1 (0.28) 7.62 (0.30) SIDE VIEW ) 12.7*10.16*7.1mm or 0.50"*0.40"*0.28" inch for 5V,12V input ; 12.7*10.16*7.62mm or 0.50"*0.40"*0.30" inch for 24V input 1 4 BOTTON VIEW 7 5 0.25 (0.01) Derating Curve Pin Configuration Pin No. Output 1 -Vin 4 5 +Vin +Vout 7 -Vout 100 LOAD (%) OTHERS 50 5.08 (0.2) 3.81 (0.15) 0.5 (0.02) -40 NOTE 0 20 40 60 85 90 100 Ta ( ) 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. File Name: SMA01-SPEC 2009-10-12