SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Pb Free, 105C MKA @Endurance at 105C 1000 to 2000 hours assured @Rated voltage : 6.3V to 50V, Nominal capacitance : 0.1 to 1000MF @Case sizes : F4B5.2L to F10B10.0L @Solvent-proof type (see PRECAUTIONS AND GUIDELINES) @Pb-free design Higher Reflow Temp. MVK ?SPECIFICATIONS Items Characteristics Category Temperature Range -40 to +105C Capacitance Tolerance Leakage Current P20%(M) (at 20C, 120Hz) I=0.01CV or 3MA, whichever is greater Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C, 2 minute) 6.3V 10V 16V 25V 35V 50V Rated voltage(Vdc) D55 to F55 0.30 0.24 0.20 0.16 0.14 0.12 tanE(Max.) F80 to JA0 0.40 0.30 0.26 0.16 0.14 0.12 (20C, 120Hz) 50 35 25 16 10 6.3 Rated voltage(Vdc) 2 2 2 2 3 4 Z(-25C)/Z(+20C) 3 3 4 6 8 10 Z(-40C)/Z(+20C) (120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for the specified period of time at 105C. Size code D55 to F55 F80 to JA0 Time 1000 hours 2000 hours Capacitance change [P30% of the initial measured value [P20% of the initial measured value D.F. (tanE) [300% of the initial specified value [200% of the initial specified value Leakage current [The initial specified value [The initial specified value Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance ?DIMENSIONS [mm] ?MARKING @Terminal Code : A P CP0.2 BP0.2 FDP0.5 W 0.3max. LP0.3 (Note) AP0.2 Note : LP0.5 for H63 to JA0 Size code D55 E55 F55 F80 H63 HA0 JA0 D 4 5 6.3 6.3 8 8 10 L A B C 5.2 4.3 4.3 5.1 5.2 5.3 5.3 5.9 5.2 6.6 6.6 7.2 7.7 6.6 6.6 7.2 6.3 8.3 8.3 9.0 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 ?PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 2.3 3.1 4.5 EX) 16V100MF 1R 100 CKA ?RATED VOLTAGE CODE 17 18 E MK A A A A A D A A A A M A A A G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 0.1MF:R10,1000MF:102) Taping code Terminal code Voltage code (ex. 10V:100,25V:250,50V:500) Series code Category Rated voltage (Vdc) 6.3 10 16 25 35 50 Code j A C E V H Please refer to "A guide to global code (surface mount type)" (1/2) CAT. No. E1001E SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Pb Free, 105C ?STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 Cap (mF) Size code tane Rated ripple current (mArms/ 105c,120Hz) Part No. 22 47 100 330 1000 33 100 100 220 10 22 47 470 33 47 47 100 330 4.7 D55 E55 F55 HA0 JA0 E55 F80 H63 HA0 D55 E55 F55 JA0 F55 F80 H63 HA0 JA0 D55 0.30 0.30 0.30 0.40 0.40 0.24 0.30 0.30 0.30 0.20 0.20 0.20 0.26 0.16 0.16 0.16 0.16 0.16 0.14 21 36 56 290 410 34 90 90 180 16 30 48 460 45 80 80 180 450 15 EMKA6R3ADA220MD55G EMKA6R3ADA470ME55G EMKA6R3ADA101MF55G EMKA6R3ADA331MHA0G EMKA6R3ADA102MJA0G EMKA100ADA330ME55G EMKA100ADA101MF80G EMKA100ADA101MH63G EMKA100ADA221MHA0G EMKA160ADA100MD55G EMKA160ADA220ME55G EMKA160ADA470MF55G EMKA160ADA471MJA0G EMKA250ADA330MF55G EMKA250ADA470MF80G EMKA250ADA470MH63G EMKA250ADA101MHA0G EMKA250ADA331MJA0G EMKA350ADA4R7MD55G WV (Vdc) 35 50 (2/2) Cap (mF) Size code tane Rated ripple current (mArms/ 105c,120Hz) 10 22 33 33 220 0.10 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 22 33 47 100 E55 F55 F80 H63 JA0 D55 D55 D55 D55 D55 D55 D55 E55 F55 F80 H63 HA0 HA0 JA0 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 25 40 80 80 375 1.3 2.6 3.2 3.8 5.6 10 14 19 29 70 70 140 170 310 Part No. EMKA350ADA100ME55G EMKA350ADA220MF55G EMKA350ADA330MF80G EMKA350ADA330MH63G EMKA350ADA221MJA0G EMKA500ADAR10MD55G EMKA500ADAR22MD55G EMKA500ADAR33MD55G EMKA500ADAR47MD55G EMKA500ADA1R0MD55G EMKA500ADA2R2MD55G EMKA500ADA3R3MD55G EMKA500ADA4R7ME55G EMKA500ADA100MF55G EMKA500ADA220MF80G EMKA500ADA220MH63G EMKA500ADA330MHA0G EMKA500ADA470MHA0G EMKA500ADA101MJA0G CAT. No. E1001E