AD AD8692ARZ-REEL7 Low cost, low noise, cmos rail-to-rail output operational amplifier Datasheet

Low Cost, Low Noise, CMOS Rail-to-Rail
Output Operational Amplifiers
AD8691/AD8692/AD8694
Photodiode amplification
Battery-powered instrumentation
Medical instruments
Multipole filters
Sensors
Portable audio devices
V+
TOP VIEW
(Not to Scale)
OUT A 1
+IN A 3
5
V+
4
–IN
V– 2
3
–IN
+IN A 3
Figure 1. 5-Lead TSOT
–IN A 2
AD8691
AD8692
TOP VIEW
(Not to Scale)
V– 4
04991-031
+IN 3
OUT A 1
APPLICATIONS
5
Figure 2. 5-Lead SC70
OUT A 1
8
V+
7
OUT B
–IN A 2
6
–IN B
+IN A 3
5
+IN B
AD8692
8
V+
7
OUT B
6 –IN B
TOP VIEW
V– 4 (Not to Scale) 5 +IN B
Figure 3. 8-Lead MSOP
04991-002
V– 2
AD8691
Figure 4. 8-Lead SOIC
OUT A
1
14 OUT D
14
OUT D
– IN A
2
13 –IN D
13
–IN D
+IN A
3
AD8694
12
+IN D
V+
4
TOP VIEW
11 V–
(Not to Scale)
+IN B 5
10 +IN C
TOP VIEW
(Not to Scale)
+IN B
5
–IN B
6
9
–IN C
OUT B
7
8
OUT C
OUT A 1
– IN A 2
+IN A 3
AD8694
–IN B 6
OUT B 7
9
8
–IN C
OUT C
Figure 5. 14-Lead SOIC
04991-032
V+ 4
12 +IN D
11 V–
10 +IN C
Figure 6. 14-Lead TSSOP
GENERAL DESCRIPTION
The AD8691, AD8692, and AD8694 are low cost, single, dual,
and quad rail-to-rail output, single-supply amplifiers featuring
low offset and input voltages, low current noise, and wide signal
bandwidth. The combination of low offset, low noise, very low
input bias currents, and high speed make these amplifiers useful
in a wide variety of applications. Filters, integrators, photodiode
amplifiers, and high impedance sensors all benefit from this
combination of performance features. Audio and other ac
applications benefit from the wide bandwidth and low
distortion of these devices.
Applications for these amplifiers include PA controls, laser
diode control loops, portable and loop-powered instrumentation,
audio amplification for portable devices, and ASIC input and
output amplifiers.
The small SC70 and TSOT package options for the AD8691
allow it to be placed next to sensors, thereby reducing external
noise pickup.
The AD8691, AD8692, and AD8694 are specified over the
extended industrial temperature range of −40°C to +125°C. The
AD8691 single is available in 5-lead SC70 and TSOT packages.
The AD8692 dual is available in 8-lead MSOP and narrow SOIC
surface-mount packages. The AD8694 quad is available in
14-lead TSSOP and narrow 14-lead SOIC packages.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
© 2005 Analog Devices, Inc. All rights reserved.
04991-033
OUT 1
04991-001
Offset voltage: 400 µV typ
Low offset voltage drift: 6 µV/°C max (AD8692/AD8694)
Very low input bias currents: 1 pA max
Low noise: 8 nV/√Hz
Low distortion: 0.0006%
Wide bandwidth: 10 MHz
Unity-gain stable
Single-supply operation: 2.7 V to 6 V
PIN CONFIGURATIONS
04991-030
FEATURES
AD8691/AD8692/AD8694
TABLE OF CONTENTS
Electrical Characteristics ................................................................. 3
Typical Performance Characteristics ..............................................6
Absolute Maximum Ratings............................................................ 5
Outline Dimensions ....................................................................... 11
Thermal Characteristics .............................................................. 5
Ordering Guide .......................................................................... 12
ESD Caution.................................................................................. 5
REVISION HISTORY
3/05—Rev. A to Rev. B
Added AD8694 ...................................................................Universal
1/05—Rev. 0 to Rev. A
Added AD8691 ...................................................................Universal
Changes to Features.......................................................................... 1
Added Figure 1 and Figure 2........................................................... 1
Changes to Electrical Characteristics ............................................ 3
Changes to Figure 6 caption............................................................ 6
Changes to Figure 9.......................................................................... 6
Updated Outline Dimensions ....................................................... 11
Changes to Ordering Guide .......................................................... 11
10/04—Revision 0: Initial Version
Rev. 0 | Page 2 of 12
AD8691/AD8692/AD8694
ELECTRICAL CHARACTERISTICS
VS = 2.7 V, VCM = VS/2, TA = 25°C, unless otherwise noted.
Table 1.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Input Bias Current
Symbol
Conditions
VOS
VCM = −0.3 V to +1.6 V
VCM = −0.1 V to +1.6 V; −40°C < TA < +125°C
Min
IB
Typ
Max
Unit
0.4
2.0
3.0
1
50
260
0.5
20
75
+1.6
mV
mV
pA
pA
pA
pA
pA
pA
V
dB
dB
V/mV
V/mV
12
6
µV/°C
µV/°C
0.2
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Offset Current
IOS
0.1
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Voltage Range
Common-Mode Rejection Ratio
Large Signal Voltage Gain
AD8694
Offset Voltage Drift
AD8691
AD8692/AD8694
INPUT CAPACITANCE
Common-Mode Input Capacitance
Differential Input Capacitance
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current/Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Settling Time
Gain Bandwidth Product
Phase Margin
Total Harmonic Distortion + Noise
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
Current Noise Density
CMRR
AVO
VCM = −0.3 V to +1.6 V
VCM = −0.1 V to +1.6 V; −40°C < TA < +125°C
RL = 2 kΩ, VO = 0.5 V to 2.2 V
RL = 2 kΩ, VO = 0.5 V to 2.2 V
−0.3
68
60
90
60
90
85
250
∆VOS/∆T
2
1.3
CCM
CDM
VOH
VOL
ISC
ZOUT
PSRR
ISY
IL = 1 mA
−40°C < TA < +125°C
IL = 1 mA
−40°C < TA < +125°C
2.64
2.6
RL = 2 kΩ
To 0.01%
pF
pF
2.66
V
V
mV
mV
mA
Ω
25
80
75
95
95
0.85
SR
tS
GBP
ØO
THD + N
G = 1, RL = 600 Ω, f = 1 kHz, VO = 250 mV p-p
5
1
10
60
0.003
en p-p
en
en
in
f = 0.1 Hz to 10 Hz
f = 1 kHz
f = 10 kHz
f = 1 kHz
1.6
8
6.5
0.05
Rev. 0 | Page 3 of 12
40
60
±20
12
f = 1 MHz, AV = 1
VS = 2.7 V to 5.5 V
−40°C < TA < +125°C
VO = 0 V
−40°C < TA < +125°C
5
2.5
0.95
1.2
dB
dB
mA
mA
V/µs
µs
MHz
Degrees
%
3.0
12
µV p-p
nV/√Hz
nV/√Hz
pA/√Hz
AD8691/AD8692/AD8694
VS = 5.0 V, VCM = VS/2, TA = 5°C, unless otherwise noted.
Table 2.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Input Bias Current
Symbol
Conditions
VOS
VCM = −0.3 V to +3.9 V
VCM = −0.1 V to +3.9 V; −40°C < TA < +125°C
Min
A Grade
Typ
0.4
IB
0.2
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Offset Current
IOS
0.1
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Voltage Range
Common-Mode Rejection Ratio
Large Signal Voltage Gain
AD8694
Offset Voltage Drift
AD8691
AD8692/AD8694
INPUT CAPACITANCE
Common-Mode Input Capacitance
Differential Input Capacitance
OUTPUT CHARACTERISTICS
Output Voltage High
Voltage Low
AD8691/AD8692
AD8694
AD8691/AD8692
AD8694
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current/Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Settling Time
Full Power Bandwidth
Gain Bandwidth Product
Phase Margin
Total Harmonic Distortion + Noise
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
Current Noise Density
CMRR
AVO
VCM = −0.3 V to +3.9 V
VCM = −0.1 V to +3.9 V; −40°C < TA < +125°C
VO = 0.5 V to 4.5 V, RL = 2 kΩ, VCM = 0 V
VO = 0.5 V to 4.5 V, RL = 2 kΩ, VCM = 0 V
−0.3
70
67
250
150
Max
Unit
2.0
3.0
1
50
260
0.5
20
75
+3.9
mV
mV
pA
pA
pA
pA
pA
pA
V
dB
dB
V/mV
V/mV
12
6
µV/°C
µV/°C
95
95
2000
∆VOS/∆T
2
1.3
CCM
CDM
VOH
VOL
ISC
ZOUT
PSRR
ISY
IL = 1 mA
IL = 10 mA
−40°C to +125°C
IL = 1 mA
IL = 10 mA
IL = 10 mA
−40°C to +125°C
−40°C to +125°C
4.96
4.7
4.6
RL = 2 kΩ
To 0.01%
<1% distortion
pF
pF
4.98
4.78
V
V
V
mV
mV
mV
mV
mV
mA
Ω
20
165
185
80
75
95
95
0.95
SR
tS
BWP
GBP
ØO
THD + N
G = 1, RL = 600 Ω, f = 1 kHz, VO = 1 V p-p
5
1
360
10
65
0.0006
en p-p
en
en
in
f = 0.1 Hz to 10 Hz
f = 1 kHz
f = 10 kHz
f = 1 kHz
1.6
8
6.5
0.05
Rev. 0 | Page 4 of 12
40
210
240
290
370
±80
10
f = 1 MHz, AV = 1
VS = 2.7 V to 5.5 V
−40°C < TA < +125°C
VO = 0 V
−40°C < TA < +125°C
5
2.5
1.05
1.3
dB
dB
mA
mA
V/µs
µs
kHz
MHz
Degrees
%
3.0
12
µV p-p
nV/√Hz
nV/√Hz
pA/√Hz
AD8691/AD8692/AD8694
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameters
Supply Voltage
Input Voltage
Differential Input Voltage
Output Short-Circuit Duration
to GND
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature Range
(Soldering, 60 sec)
Ratings
6V
VSS − 0.3 V to VDD + 0.3 V
±6 V
Observe derating curves
−65°C to +150°C
−40°C to +125°C
−65°C to +150°C
300°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL CHARACTERISTICS
Table 4.
Package Type
8-Lead MSOP (RM)
8-Lead SOIC (R)
5-Lead TSOT (UJ-5)
5-Lead SC70 (KS)
14-Lead TSSOP (RU)
14-Lead SOIC (R)
1
θJA1
210
158
207
376
180
120
θJC
45
43
61
126
35
36
Unit
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
θJA is specified for the worst-case conditions, that is, the device soldered in
the circuit board for surface-mount packages.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 5 of 12
AD8691/AD8692/AD8694
TYPICAL PERFORMANCE CHARACTERISTICS
VS = +5 V or ±2.5 V, unless otherwise noted.
2.5k
300
VS = 5V
VCM = –0.3V TO +3.9V
VS = 5V AND 2.7V
250
200
1.5k
IB (pA)
NUMBER OF AMPLIFIERS
2.0k
1.0k
150
100
50
500
–1.5
–1.0
–0.5
0
0.5
1.0
1.5
2.0
VOS (mV)
–50
04991-003
0
–2.0
–40 –30 –20 –10
20
30
40
50
70
60
80
90 100 110 120
Figure 10. Input Bias Current vs. Temperature
1.0
30
VS = 5V AND 2.7V
VCM = 2.5V
TA = –40°C TO +125°C
25
0.8
20
ISY (mA)
15
0.6
0.4
10
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0
TCVOS (µV/°C)
0
04991-004
0
0
2
3
4
5
6
7
VSY (V)
Figure 8. AD8692/AD8694 Input Offset Voltage Drift Distribution
Figure 11. Supply Current vs. Supply Voltage
2.0k
1.6k
1
04991-007
0.2
5
2.5
VS = ±2.5V AND ±1.35V
VS = 5V
TA = 25°C
1.2k
ISY @ ±2.5V
SUPPLY CURRENT (mA)
2.0
800
400
0
–400
–800
–1.2k
ISY @ ±1.35V
1.5
1.0
0.5
–2.0k
–0.3 0
0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 3.3 3.6 3.9
COMMON-MODE VOLTAGE (V)
04991-005
–1.6k
0
–40
–20
0
20
40
60
80
100
120
TEMPERATURE (°C)
Figure 12. Supply Current vs. Temperature
Figure 9. Input Offset Voltage vs. Common-Mode Voltage
Rev. 0 | Page 6 of 12
140
04991-008
NUMBER OF AMPLIFIERS
10
TEMPERATURE (°C)
Figure 7. Input Offset Voltage Distribution
INPUT OFFSET VOLTAGE (µV)
0
04991-006
0
AD8691/AD8692/AD8694
100
VSY = ±2.5V, ±1.35V
RL = 2kΩ
CL = 15pF
VS = 5V
80
AD8691_92 SINK
10
AD8694 SINK
AD8691_92 SOURCE
1
0.01
0.1
90
20
45
0
0
–45
–20
AD8694 SOURCE
0.1
0.001
40
1
10
100
LOAD CURRENT (mA)
–40
1k
100k
1M
–90
10M
Figure 16. Open-Loop Gain and Phase vs. Frequency
35
120
VS = 5V
VS = 5V AND 2.7V
AD8691_92 (VDD-VOH)
30
100
AD8694 (VDD-VOH)
25
80
CMRR (dB)
20
AD8691_92 (VOL)
15
AD8694 (VOL)
60
40
10
–20
0
20
40
60
80
100
120
TEMPERATURE (°C)
0
04991-010
0
–40
1k
10k
Figure 14. Output Voltage Swing vs. Temperature (IL = 1 mA)
10M
120
VS = 5V
VS = 5V AND 2.7V
AD8691_92 (VDD-VOH)
300
100
AD8694 (VDD-VOH)
PSRR (dB)
80
200
AD8691_92 (VOL)
150
AD8694 (VOL)
100
60
40
20
–20
0
20
40
60
80
100
120
TEMPERATURE (°C)
04991-011
50
0
–40
1M
Figure 17. CMRR vs. Frequency
350
250
100k
FREQUENCY (Hz)
04991-013
20
5
Figure 15. Output Voltage Swing vs. Temperature (IL = 10 mA)
0
10
100
1k
10k
100k
FREQUENCY (Hz)
Figure 18. PSRR vs. Frequency
Rev. 0 | Page 7 of 12
1M
10M
04991-014
OUTPUT VOLTAGE SWING (mV)
10k
FREQUENCY (Hz)
Figure 13. Output Voltage to Supply Rail vs. Load Current
OUTPUT VOLTAGE SWING (mV)
PHASE (Degrees)
100
60
04991-012
OPEN-LOOP GAIN (dB)
1k
04991-009
OUTPUT VOLTAGE TO SUPPLY RAIL (mV)
10k
AD8691/AD8692/AD8694
10k
VS = ±2.5V
VS = 5V
CL = 200pF
RL = ∞
AV = 1
1k
IMPEDANCE (Ω)
10
VOLTAGE (1V/DIV)
AV = 100
100
AV = 10
1
AV = 1
0.1
0.01
1k
10k
100k
1M
10M
FREQUENCY (Hz)
04991-018
0.0001
100
04991-015
0.001
TIME (400ns/DIV)
Figure 19. Closed-Loop Output Impedance vs. Frequency
Figure 22. Large Signal Transient Response
40
VS = 5V AND 2.7V
RL = ∞
AV = 1
35
VS = ±2.5V
AV = –50
0
VOUT (V)
25
20
–2.5
15
100
VIN (mV)
10
1
10
100
1k
LOAD CAPACITANCE (pF)
04991-016
0
04991-019
0
5
TIME (400ns/DIV)
Figure 20. Small Signal Overshoot vs. Load Capacitance
Figure 23. Positive Overload Recovery
VS = ±2.5V, ±1.35V
RL = 10kΩ
CL = 200pF
AV = 1
VS = ±2.5V
AV = –50
VOLTAGE (50mV/DIV)
VOUT (V)
2.5
0
VIN (mV)
0
TIME (200ns/DIV)
04991-017
–100
TIME (400ns/DIV)
Figure 24. Negative Overload Recovery
Figure 21. Small Signal Transient Response
Rev. 0 | Page 8 of 12
04991-020
OVERSHOOT (%)
30
AD8691/AD8692/AD8694
0.1
1k
VS = ±2.5V
AV = 1
VIN = 1V p-p
BW = 20kHz
NOISE (nV/ Hz)
THD + N (%)
0.01
RL = 600Ω
RL = 1kΩ
0.001
VS = ±2.5V AND ±1.35V
100
10
100
1k
10k
FREQUENCY (Hz)
20k
1
04991-021
1
10
100
1k
10k
FREQUENCY (Hz)
Figure 25. THD + N vs. Frequency
Figure 27. Voltage Noise Density
150
+2.5V
VS = 5V AND 2.7V
CHANNEL SEPARATION (dB)
140
VOLTAGE NOISE (1µV/DIV)
R1
10kΩ
V+
A
VIN
28mV p-p
V–
130
–2.5V
V–
VOUT
R2
100Ω
B
V+
120
110
100
TIME (1s/DIV)
04991-022
90
Figure 26. 0.1 Hz to 10 Hz Input Voltage Noise
80
1k
10k
100k
1M
10M
FREQUENCY (Hz)
Figure 28. AD8692/AD8694 Channel Separation
Rev. 0 | Page 9 of 12
04991-024
0.0001
20
04991-023
RL = 100kΩ
AD8691/AD8692/AD8694
VS = +2.7 V or ±1.35 V, unless otherwise noted.
1.2k
60
VS = 2.7V
OUTPUT VOLTAGE SWING (mV)
NUMBER OF AMPLIFIERS
1.0k
800
600
400
0
–2.0
–1.5
–1.0
–0.5
0
0.5
1.0
1.5
2.0
VOS (mV)
AD8694 (VDD-VOH)
40
30
AD8691_92 (VOL)
20
AD8694 (VOL)
10
0
–40
04991-025
200
AD8691_92 (VDD-VOH)
50
–20
0
20
40
60
2.0k
120
VS = 2.7V
CL = 200pF
RL = ∞
AV = 1
VS = 2.7V
TA = 25°C
1.2k
VOLTAGE (500mV/DIV)
INPUT OFFSET VOLTAGE (µV)
100
Figure 32. Output Voltage Swing vs. Temperature (IL = 1 mA)
Figure 29. Input Offset Voltage Distribution
1.6k
80
TEMPERATURE (°C)
04991-028
VS = 2.7V
VCM = –0.3V TO +1.6V
800
400
0
–400
–800
–1.2k
0
0.3
0.6
0.9
1.2
1.5 1.6
COMMON-MODE VOLTAGE (V)
Figure 33. Large Signal Transient Response
Figure 30. Input Offset Voltage vs. Common-Mode Voltage
VS = 2.7V
1k
100
AD8691_92 SINK
AD8694 SINK
AD8691_92 SOURCE
1
AD8694 SOURCE
0.1
0.001
0.01
0.1
1
10
LOAD CURRENT (mA)
04991-027
OUTPUT VOLTAGE TO SUPPLY RAIL (mV)
10k
10
TIME (400ns/DIV)
Figure 31. Output Voltage to Supply Rail vs. Load Current
Rev. 0 | Page 10 of 12
04991-029
–2.0k
–0.3
04991-026
–1.6k
AD8691/AD8692/AD8694
OUTLINE DIMENSIONS
2.90 BSC
3.00
BSC
5
4
2.80 BSC
1.60 BSC
8
3.00
BSC
1
5
4.90
BSC
1
2
3
PIN 1
0.95 BSC
4
1.90
BSC
*0.90
0.87
0.84
PIN 1
0.65 BSC
*1.00 MAX
1.10 MAX
0.15
0.00
0.38
0.22
COPLANARITY
0.10
0.80
0.60
0.40
8°
0°
0.23
0.08
0.10 MAX
SEATING
PLANE
0.50
0.30
0.20
0.08
8°
4°
0°
SEATING
PLANE
0.60
0.45
0.30
COMPLIANT TO JEDEC STANDARDS MO-187-AA
*COMPLIANT TO JEDEC STANDARDS MO-193-AB WITH
THE EXCEPTION OF PACKAGE HEIGHT AND THICKNESS.
Figure 34. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
Figure 37. 5-Lead Thin Small Outline Transistor Package [TSOT]
(UJ-5)
Dimensions shown in millimeters
2.20
2.00
1.80
1.35
1.25
1.15
5
8.75 (0.3445)
8.55 (0.3366)
1
2
4.00 (0.1575)
3.80 (0.1496)
2.40
2.10
1.80
4
3
PIN 1
0.65 BSC
1.00
0.90
0.70
1.10
0.80
0.30
0.15
0.10 MAX
SEATING
PLANE
0.30
0.10
0.22
0.08
8
1
7
6.20 (0.2441)
5.80 (0.2283)
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0039)
0.40
0.10
14
0.51 (0.0201)
0.31 (0.0122)
COPLANARITY
0.10
0.50 (0.0197)
× 45°
0.25 (0.0098)
1.75 (0.0689)
1.35 (0.0531)
SEATING
PLANE
8°
0.25 (0.0098) 0° 1.27 (0.0500)
0.40 (0.0157)
0.17 (0.0067)
COMPLIANT TO JEDEC STANDARDS MO-203AA
COMPLIANT TO JEDEC STANDARDS MS-012-AB
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
Figure 35. 5-Lead Thin Shrink Small Outline Package [SC70]
(KS-5)
Dimensions shown in millimeters
Figure 38. 14-Lead Standard Small Outline Package [SOIC]
Narrow Body (R-14)
Dimensions shown in millimeters
0.10 COPLANARITY
5.10
5.00
4.90
5.00 (0.1968)
4.80 (0.1890)
8
4.00 (0.1574)
3.80 (0.1497) 1
5
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0040)
14
6.20 (0.2440)
4 5.80 (0.2284)
4.50
4.40
4.30
1.75 (0.0688)
1.35 (0.0532)
0.51 (0.0201)
COPLANARITY
SEATING 0.31 (0.0122)
0.10
PLANE
8
0.50 (0.0196)
× 45°
0.25 (0.0099)
6.40
BSC
1
7
PIN 1
1.05
1.00
0.80
8°
0.25 (0.0098) 0° 1.27 (0.0500)
0.40 (0.0157)
0.17 (0.0067)
COMPLIANT TO JEDEC STANDARDS MS-012-AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
0.65
BSC
1.20
MAX
0.15
0.05
0.30
0.19
0.20
0.09
SEATING
COPLANARITY
PLANE
0.10
8°
0°
COMPLIANT TO JEDEC STANDARDS MO-153AB-1
Figure 39. 14-Lead Thin Shrink Small Outline Package [TSSOP]
(RU-14)
Dimensions shown in millimeters
Figure 36. 8-Lead Standard Small Outline Package [SOIC]
Narrow Body (R-8)
Dimensions shown in millimeters and (inches)
Rev. 0 | Page 11 of 12
0.75
0.60
0.45
AD8691/AD8692/AD8694
ORDERING GUIDE
Model
AD8691AUJZ-R2
AD8691AUJZ-REEL
AD8691AUJZ-REEL7
AD8691AKSZ-R2
AD8691AKSZ-REEL
AD8691AKSZ-REEL7
AD8692ARMZ-R21
AD8692ARMZ-REEL
AD8692ARZ
AD8692ARZ-REEL
AD8692ARZ-REEL7
AD8694ARUZ
AD8694ARUZ-REEL
AD8694ARZ
AD8694ARZ-REEL
AD8694ARZ-REEL7
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Temperature Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
5-Lead TSOT
5-Lead TSOT
5-Lead TSOT
5-Lead SC70
5-Lead SC70
5-Lead SC70
8-Lead MSOP
8-Lead MSOP
8-Lead SOIC
8-Lead SOIC
8-Lead SOIC
14-Lead TSSOP
14-Lead TSSOP
14-Lead SOIC
14-Lead SOIC
14-Lead SOIC
Z = Pb-free part.
© 2005 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D04991–0–3/05(B)
Rev. 0 | Page 12 of 12
Package Option
UJ-5
UJ-5
UJ-5
KS-5
KS-5
KS-5
RM-8
RM-8
R-8
R-8
R-8
RU-14
RU-14
R-14
R-14
R-14
Branding
ACA
ACA
ACA
ACA
ACA
ACA
APA
APA
Similar pages