PD - 90653E IRHF7130 JANSR2N7261 100V, N-CHANNEL REF: MIL-PRF-19500/601 RADIATION HARDENED POWER MOSFET THRU-HOLE (TO-39) ® ™ RAD Hard HEXFET TECHNOLOGY Product Summary Part Number Radiation Level IRHF7130 100K Rads (Si) IRHF3130 300K Rads (Si) IRHF4130 600K Rads (Si) IRHF8130 1000K Rads (Si) R DS(on) 0.18Ω 0.18Ω 0.18Ω 0.18Ω ID QPL Part Number 8.0A JANSR2N7261 8.0A JANSF2N7261 8.0A JANSG2N7261 8.0A JANSH2N7261 TO-39 HEXFET® technol- International Rectifier’s RADHard ogy provides high performance power MOSFETs for space applications. This technology has over a decade of proven performance and reliability in satellite applications. These devices have been characterized for both Total Dose and Single Event Effects (SEE). The combination of low Rdson and low gate charge reduces the power losses in switching applications such as DC to DC converters and motor control. These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters. Features: n n n n n n n n n Single Event Effect (SEE) Hardened Low RDS(on) Low Total Gate Charge Proton Tolerant Simple Drive Requirements Ease of Paralleling Hermetically Sealed Ceramic Package Light Weight Absolute Maximum Ratings Pre-Irradiation Parameter ID @ VGS = 12V, TC = 25°C ID @ VGS = 12V, TC = 100°C IDM PD @ T C = 25°C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current ➀ Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy ➁ Avalanche Current ➀ Repetitive Avalanche Energy ➀ Peak Diode Recovery dv/dt ➂ Operating Junction Storage Temperature Range Lead Temperature Weight Units 8.0 5.0 32 25 0.20 ±20 130 8.0 2.5 5.5 -55 to 150 A W W/°C V mJ A mJ V/ns o C 300 ( 0.063 in.(1.6mm) from case for 10s) 0.98 (Typical ) g For footnotes refer to the last page www.irf.com 1 08/08/03 IRHF7130 Pre-Irradiation Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified) Parameter Min Drain-to-Source Breakdown Voltage 100 — — V — 0.10 — V/°C — — 2.0 2.5 — — — — — — — — 0.18 Ω 0.185 4.0 V — S( ) 25 µA 250 — — — — — — — — — — — — — — — — — — — 7.0 100 -100 50 10 20 25 32 40 40 — ∆BV DSS /∆T J Temperature Coefficient of Breakdown Voltage RDS(on) Static Drain-to-Source On-State Resistance VGS(th) Gate Threshold Voltage g fs Forward Transconductance IDSS Zero Gate Voltage Drain Current IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (‘Miller’) Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance Typ Max Units Test Conditions VGS = 0V, ID = 1.0mA Reference to 25°C, ID = 1.0mA VGS =12V, ID = 5.0A ➃ VGS =12V, ID = 8.0A VDS = VGS, ID = 1.0mA VDS > 15V, IDS = 5.0A ➃ VDS= 80V ,VGS=0V VDS = 80V, VGS = 0V, TJ = 125°C VGS = 20V VGS = -20V VGS =12V, ID =8.0A VDS = 50V Ω BVDSS nA nC VDD = 50V, ID =8.0A VGS =12V, RG = 7.5Ω ns nH Measured from Drain lead (6mm /0.25in. from package) to Source lead (6mm /0.25in. from package) with Source wires internally bonded from Source Pin to Drain Pad Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance — — — 1100 310 55 — — — VGS = 0V, VDS = 25V f = 1.0MHz pF Source-Drain Diode Ratings and Characteristics Parameter Min Typ Max Units IS ISM VSD trr Q RR Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) ➀ Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge ton Forward Turn-On Time — — — — — — — — — — 8.0 3.2 1.5 270 3.0 Test Conditions A V nS µC Tj = 25°C, IS = 8.0A, VGS = 0V ➃ Tj = 25°C, IF = 8.0A, di/dt ≤ 100A/µs VDD ≤ 50V ➃ Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD. Thermal Resistance Parameter RthJC RthJ-PCB Junction-to-Case Junction-to-Ambient Min Typ Max Units — — — — 5.0 175 °C/W Test Conditions Typical socket mount Note: Corresponding Spice and Saber models are available on the G&S Website. For footnotes refer to the last page 2 www.irf.com Pre-Irradiation Radiation Characteristics IRHF7130 International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison. Table 1. Electrical Characteristics @ Tj = 25°C, Post Total Dose Irradiation ➄➅ Parameter BVDSS VGS(th) IGSS IGSS IDSS RDS(on) RDS(on) VSD 100K Rads(Si)1 Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source ➃ On-State Resistance (TO-3) Static Drain-to-Source ➃ On-State Resistance (TO-39) Diode Forward Voltage ➃ 300 - 1000K Rads (Si)2 Test Conditions Units Min Max Min Max 100 2.0 — — — — — 4.0 100 -100 25 0.18 100 1.25 — — — — — 4.5 100 -100 25 0.24 V — 0.18 — 0.24 Ω VGS = 12V, ID =5.0A — 1.5 — 1.5 V V GS = 0V, IS = 8.0A VGS = 0V, ID = 1.0mA VGS = VDS, ID = 1.0mA VGS = 20V VGS = -20 V VDS=80V, V GS =0V V GS = 12V, ID =5.0A nA µA Ω 1. Part numbers IRHF7130, (JANSR2N7261) 2. Part number IRHF3130 (JANSF2N7261), IRHF4130 (JANSG2N7261), IRHF8130(, , JANSH2N7261) International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2. Table 2. Single Event Effect Safe Operating Area Ion Cu Br LET MeV/(mg/cm2)) 28 36.8 Energy (MeV) 285 305 Range (µm) 43 39 VDS(V) @VGS=0V @VGS=-5V @VGS=-10V @VGS=-15V @VGS=-20V 100 100 100 80 60 100 90 70 50 — 120 100 VDS 80 Cu 60 Br 40 20 0 0 -5 -10 -15 -20 -25 VGS Fig a. Single Event Effect, Safe Operating Area For footnotes refer to the last page www.irf.com 3 IRHF7130 Post-Irradiation Pre-Irradiation Fig 1. Typical Response of Gate Threshhold Fig 2. Typical Response of On-State Resistance Voltage Vs. Total Dose Exposure Vs. Total Dose Exposure Fig 3. Typical Response of Transconductance Vs. Total Dose Exposure 4 Fig 4. Typical Response of Drain to Source Breakdown Vs. Total Dose Exposure www.irf.com Post-Irradiation Pre-Irradiation Fig 5. Typical Zero Gate Voltage Drain Current Vs. Total Dose Exposure IRHF7130 Fig 6. Typical On-State Resistance Vs. Neutron Fluence Level Fig 8a. Gate Stress of VGSS Equals 12 Volts During Radiation Fig 7. Typical Transient Response of Rad Hard HEXFET During 1x1012 Rad (Si)/Sec Exposure www.irf.com Fig 8b. VDSS Stress Equals 80% of BVDSS During Radiation 5 RadiationPost-Irradiation Characteristics Pre-Irradiation IRHF7130 Note: Bias Conditions during radiation: VGS = 12 Vdc, VDS = 0 Vdc Fig 9. Typical Output Characteristics Pre-Irradiation Fig 10. Typical Output Characteristics Post-Irradiation 100K Rads (Si) Fig 11. Typical Output Characteristics Post-Irradiation 300K Rads (Si) Fig 12. Typical Output Characteristics Post-Irradiation 1 Mega Rads (Si) 6 www.irf.com Radiation Characteristics Pre-Irradiation IRHF7130 Note: Bias Conditions during radiation: VGS = 0 Vdc, VDS = 80 Vdc Fig 13. Typical Output Characteristics Pre-Irradiation Fig 14. Typical Output Characteristics Post-Irradiation 100K Rads (Si) Fig 15. Typical Output Characteristics Post-Irradiation 300K Rads (Si) Fig 16. Typical Output Characteristics Post-Irradiation 1 Mega Rads (Si) www.irf.com 7 IRHF7130 Fig 17. Typical Output Characteristics Fig 19. Typical Transfer Characteristics 8 Pre-Irradiation Fig 18. Typical Output Characteristics Fig 20. Normalized On-Resistance Vs. Temperature www.irf.com Pre-Irradiation IRHF7130 29 Fig 21. Typical Capacitance Vs. Drain-to-Source Voltage Fig 22. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 23. Typical Source-Drain Diode Forward Voltage Fig 24. Maximum Safe Operating Area www.irf.com 9 IRHF7130 Pre-Irradiation VDS VGS RD D.U.T. RG + - VDD VGS Pulse Width ≤ 1 µs Duty Factor ≤ 0.1 % Fig 26a. Switching Time Test Circuit VDS 90% 10% VGS Fig 25. Maximum Drain Current Vs. Case Temperature td(on) tr t d(off) tf Fig 26b. Switching Time Waveforms Fig 27. Maximum Effective Transient Thermal Impedance, Junction-to-Case 10 www.irf.com Pre-Irradiation IRHF7130 1 5V L VDS D .U .T RG IA S 2V 0V GS D R IV E R + - VD D A 0 .0 1 Ω tp Fig 28a. Unclamped Inductive Test Circuit V (B R )D SS tp Fig 28c. Maximum Avalanche Energy Vs. Drain Current IAS Current Regulator Same Type as D.U.T. Fig 28b. Unclamped Inductive Waveforms 50KΩ QG 12V .2µF .3µF 12 V QGS QGD + V - DS VGS VG 3mA Charge Fig 29a. Basic Gate Charge Waveform www.irf.com D.U.T. IG ID Current Sampling Resistors Fig 29b. Gate Charge Test Circuit 11 IRHF7130 Pre-Irradiation Foot Notes: ➀ Repetitive Rating; Pulse width limited by maximum junction temperature. ➁ VDD = 25V, starting TJ = 25°C, L=4.1mH Peak IL = 3.5A, VGS =12V ➂ I SD ≤ 3.5A, di/dt ≤ 140A/µs, VDD ≤ 100V, TJ ≤ 150°C ➃ Pulse width ≤ 300 µs; Duty Cycle ≤ 2% ➄ Total Dose Irradiation with VGS Bias. 12 volt VGS applied and VDS = 0 during irradiation per MIL-STD-750, method 1019, condition A. ➅ Total Dose Irradiation with VDS Bias. 80 volt VDS applied and V GS = 0 during irradiation per MlL-STD-750, method 1019, condition A. Case Outline and Dimensions — TO-205AF(Modified TO-39) LEGEND 1- SOURCE 2- GATE 3- DRAIN IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 08/03 12 www.irf.com