LESHAN RADIO COMPANY, LTD. EGP10A thru EGP10M FEATURES Glass Passivated Junction Fast Switching Rectifiers * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High temperature metallurgically Reverse Voltage 50 to 1000V Forward Current 1.0A bonded construction * Cavity-free glass passivated junction * Capable of meeting environmental standards of MIL-S-19500 * 1.0 A operation at TA=55°C with no thermal runaway * For use in high frequency rectifier circuits * Fast switching for high efficiency * Typical IR less than 0.1µA * High temperature soldering guaranteed: 350°C/10 seconds * 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-41, molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end We declare that the material of product Mounting Position: Any compliance with RoHS requirements. Weight: 0.012 oz., 0.3 g Handling precautin:None Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol symbol EGP 10A EGP 10B EGP 10D EGP 10G EGP 10J EGP 10K EGP 10M Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 0.375" (9.5mm) lead length at TA = 55°C IF(AV) 1.0 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Maximum full load reverse current, full cycle average,0.375"(9.5mm) lead lengths at TA = 55° C IR(AV) 100 µA Typical thermal resistance (Note 2) RθJA 55 –50 to +150 °C/W Operating junction and storage temperature range TJ, TSTG °C Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TA = 25°C at rated DC blocking voltage TA = 125°C Typical reverse recovery time (Note 1) Typical junction capacitance at 4.0V, 1MHz symbol VF EGP 10A EGP 10B EGP 10D 1 1.25 trr EGP 10J EGP 10K 1.7 5.0 100 IR CJ EGP 10G 50 EGP 10M Unit V µA 75 15 ns PF NOTES: 1. IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted 1/3 LESHAN RADIO COMPANY, LTD. 4. Characteristic Curves ( TA = 25°C unless otherwise noted ) 1.0 0.5 0.375" (9.5mm) Lead Length 0 100 25 50 75 100 125 150 175 Ambient Temperature, °C Fig 3. – Typical Instantaneous Forward Characteristics TJ = 25°C Pulse width = 300µs 1% Duty Cycle 10 1.0 0.1 100 Fig 5. –typical transient thermal impedance 40 30 20 10 0 1 10 Number of Cycles at 60Hz 100 10 Tj=125℃ 1.0 Tj=75℃ 0.1 Tj=25℃ 0.01 Fig 6. – Typical Junction Capacitance 10 1.0 0.1 0.1 1.0 10 t,Pulse duration,sec TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) 1.0 1.2 1.4 1.6 1.8 Instantaneous Forward Voltage (V) 0.01 50 Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current Fig 4. – Typical Reverse Characteristics Instantaneous Reverse Current (µA) 0 0.01 0.8 Transient thermal impedance(°C/W) Average Forward Rectified Current (A) 60 Hz Resistive or Inductive Load Junction Capacitance (pF) Instantaneous Forward Current (A) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve 100 20 10 1.0 0.1 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 1 10 Reverse Voltage (V) 100 2/3 LESHAN RADIO COMPANY, LTD. 5.Package Dimensions in inches and (millmeters) Package outline L Φd ΦD Dimensions L L1 ΦD Φd inches Min. Max. 0.166 0.205 1.0 0.080 0.107 0.028 0.034 mm Min. 4.2 25.4 2.0 0.7 Max. 5.2 2.7 0.9 Note: DO-41 molded plastic case The marking band indicates the cathode 3/3