RGL341A-RGL341M Surface Mount Rectifiers VOLTAGE RANGE: 50 --- 1000 V CURRENT: 1.0 A FEATURES DO - 213AA Ideal for surface mounted applications. Low leakage current. SOLDERABLE ENDS Glass passivated chips. 0 D2=D1 ＋ －0.20 Fast switching. 1.6± 0.1 High temperature soldering guaranteed： D2 D1 250℃/10 seconds/.375”,(9.5mm) lead lengths MECHANICAL DATA 0.5± 0.1 0.5± 0.1 3.5± 0.2 Molded plastic use UL94V-0 recognized flame retardant epoxy. Plated terminals, solderable per Dimensions in millimeters MIL-STD-202, method 208 Polarity: Color band on body denotes cathode. Mounting position: Any Weight: 0.036 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ Ambient temp. Unless otherwise specified. Single phase, half sine wave, 60HZ, resistive or inductive load.For capacitive load,derate current by 20%. RGL RGL RGL RGL RGL RGL RGL UNITS SYMBOL 341A 341B 341D 341G 341J 341K 341M Maximum Current Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current TT=55℃ I(AV) 1.0 Amps Peak Forward Surge Current Single Sine-wave on Rated Load (JEDEC Method) IFSM 10 Amps Maximum Instantaneous Forward Voltage Drop at 1.0A DC VF 1.3 Volts Maximum DC Reverse Current at Rated DC Blocking Voltage IR 5.0 100.0 µA TA=25℃ TA=125℃ 700 Volts Maximum Reverse Recovery Time , Test Conditions： IF=0.5A, IR=1.0A, IRR=0.25A Trr Typical Junction Capacitance VR= 4.0V,f = 1.0MHZ CJ 15 pF Operating Junction And Storage Temperature Range TJ TSTG -55 to +150 ℃ http://www.luguang.cn 150 250 mail:[email protected] 500 nS RGL341A-RGL341M Surface Mount Rectifiers FIG. 1 – DERATING CURVE FOR OUTPUT RECTIFIER CURRENT FIG. 3 – TYPICAL REVERSE CHARACTERISTICS FIG. 2 – MAXIMUM NON – REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 4 – TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 5 –TYPICAL JUNCTION CAPACITANCE http://www.luguang.cn mail:[email protected]