PhotoMOS RELAYS GU (General Use) Type SOP Series [1-Channel (Form A) Type] 6.3±0.2 .248±.008 ×(H) 2.1 mm (W) .173× (L) .248×(H) .083 inch —approx. 25% of the volume and 50% of the footprint size of DIP type PhotoMOS Relays. 4.4±0.2 .173±.008 2.1±0.2 .083±.008 (DIP) mm inch (SOP) Approx. 25% 1 6 2 5 3 4 Volume Approx. 50% 3. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 4. Low-level off state leakage current In contrast to the SSR with an off state leakage current of several milliamps, the PhotoMOS relay features a very small off state leakage current of only 100 pA even at the rated load voltage of 400 V (AQV214S). Footprint TYPICAL APPLICATIONS FEATURES 2. Tape and reel The device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automatic insertion machines. 1. 1 channel (Form A) in super miniature design The device comes in a super-miniature SO package measuring (W) 4.4 × (L) 6.3 • Telephones • Measuring instruments • Computer • Industrial robots • High-speed inspection machines TYPES Part No. Picked from the 1/2/3-pin side Picked from the 4/5/6-pin side 1 Form A 1 Form A AQV212SX AQV212SZ AQV215SX AQV215SZ AQV217SX AQV217SZ AQV210SX AQV210SZ AQV214SX AQV214SZ AQV216SX AQV216SZ Output ratings* Type Packing quantity in tape and reel Load voltage Load current 60 V 350 mA 100 V 300 mA 200 V 160 mA AC/DC 1,000 pcs. 350 V 120 mA 400 V 100 mA 600 V 40 mA *Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" ro "Z" is not needed when ordering; Tube: 75 pcs.; Case: 1,500 pcs.) (2) For space reasons, the top two letters of the product number "AQ" are ommitted on the product seal. The package type indicator "X" and "Z" are also omitted from the seal. (Ex. the label for product number AQV214S is V214S). RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item Input Symbol LED forward current LED reverse voltage IF VR Peak forward current IFP Power dissipation Load voltage (peak AC) Pin VL Continuous load current IL Peak load current Ipeak Power dissipation Total power dissipation I/O isolation voltage Pout Output Temperature limits Type of AQV212S AQV215S AQV217S AQV210S AQV214S AQV216S connection 50 mA 3V f = 100 Hz, Duty factor = 0.1% 1A A B C Remarks 60 V 0.35 A 0.50 A 0.70 A 100 V 0.30 A 0.40 A 0.56 A 75 mW 200 V 350 V 0.16 A 0.12 A 0.20 A 0.13 A 0.28 A 0.15 A 400 V 0.10 A 0.11 A 0.12 A 600 V 0.04 A 0.05 A 0.06 A 1.0A 0.90A 0.48A 0.3 A 0.12 A 0.3 A PT Viso 450 mW 500 mW 1,500 V AC Operating Topr –40°C to +85°C –40°F to +185°F Storage Tstg –40°C to +100°C –40°F to +212°F A connection: Peak AC, DC B,C connection: DC A connection: 100 ms (1 shot) VL= DC Non-condensing at low temperatures 47 AQV21❍S 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item LED operate current LED turn off current Input LED dropout voltage Type of Symbol connec- AQV212S AQV215S AQV217S AQV210S AQV214S AQV216S Remarks tion Typical 0.7 mA IFon — IL= Max. Maximum 3 mA Minimum 0.4 mA IFoff — IL= Max. Typical 0.65 mA Typical 1.14 V (1.25 V at IF = 50 mA) VF — IF= 5 mA Maximum 1.5 V Typical Ron A Ron B Ron C ILeak — Ton — Toff — Ciso — Riso — Maximum Typical On resistance Maximum Output Typical Maximum Transfer characteristics Off state Maximum leakage current Typical Turn on time* Maximum Typical Turn off time Maximum Typical I/O capacitance Maximum Initial I/C isolaMinimum tion resistance 0.83 Ω 2.3 Ω 11 Ω 23 Ω 30 Ω 70 Ω 2.5 Ω 4.0 Ω 15 Ω 35 Ω 50 Ω 120 Ω 0.44 Ω 1.15 Ω 5.5 Ω 11.5 Ω 22.5 Ω 55 Ω 1.25 Ω 2.0 Ω 7.5 Ω 17.5 Ω 25 Ω 100 Ω 0.25 Ω 0.6 Ω 2.8 Ω 6.0 Ω 11.3 Ω 28 Ω 0.63 Ω 1.0 Ω 3.8 Ω 8.8 Ω 12.5 Ω 50 Ω 0.25 ms 0.5 ms 0.05 ms 0.28 ms 0.5 ms 0.04 ms 1 µA 0.65 ms 2.0 ms 0.08 ms 0.60 ms 2.0 ms 0.06 ms 0.25 ms 0.25 ms 1.0 ms 0.5 ms 0.05 ms 0.05 ms 0.2 ms 0.8 pF 1.5 pF IF= 5 mA IL= Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 0 VL = Max. IF= 5 mA VL = Max. IF= 5 mA VL = Max. f = 1 MHz VB = 0 1,000 MΩ 500 V DC Note: Recommendable LED forward current IF = 5mA. For type of connection, see page 31. *Turn on/Turn off time Input 90% Output 10% Toff Ton ■ For Dimensions, see Page 28. ■ For Schematic and Wiring Diagrams, see Page 31. ■ For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2.-(1) On resistance vs. ambient temperature characteristics 2.-(2) On resistance vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 400 5 50 4 40 AQV215S 200 AQV217S AQV215S 3 2 On resistance, Ω 300 On resistance, Ω Load current, mA AQV212S AQV214S AQV210S 30 20 AQV210S 100 0 –40 –20 48 AQV214S AQV216S 0 20 40 60 8085 100 Ambient temperature, °C AQV217S AQV212S 1 0 10 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C AQV21❍S 2.-(3) On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics 4. Turn off time vs. ambient temperature characteristics Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 120 100 Turn on time, ms On resistance, Ω 80 60 2.0 1.5 AQV212S,AQV215S Turn off time, ms 2.5 AQV216S 0.4 0.3 0.2 1.0 40 AQV212S –40 –20 0 0 20 40 60 8085 Ambient temperature, °C 0.1 AQV214S,AQV217S 0.5 20 0 0.5 3.0 –40 AQV210S, AQV216S 0 20 40 60 8085 Ambient temperature, °C –20 0 AQV215S –40 AQV214S,AQV217S,AQV210S,AQV216S –20 0 20 40 60 8085 Ambient temperature, °C 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics 7. LED dropout voltage vs. ambient temperature characteristics Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; LED current: 5 to 50 mA 5 4 3 2 1.5 LED dropout voltage, V LED turn off current, mA LED operate current, mA 5 4 3 2 1.4 1.3 1.2 50mA 30mA 20mA 10mA 5mA 1.1 1 1 1.0 0 –40 –20 0 0 20 40 60 80 85 Ambient temperature, °C –40 –20 8.-(1). Voltage vs. current characteristics of output at MOS portion 8.-(2). Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F –40 –20 0 20 40 60 80 85 100 Ambient temperature, °C 9. Off state leakage current Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 200 AQV212S AQV215S 0.3 0.2 AQV217S 160 AQV210S AQV214S 120 80 AQV216S 40 0.1 –1.0 –0.8 –0.6 –0.4 –0.2 Off state leakage current, A 0.4 Current, A 0.5 Current, A 0 0 20 40 60 8085 Ambient temperature, °C –5 –4 –3 –2 –1 0.2 0.4 0.6 0.8 1.0 Voltage,V –0.1 1 –40 –0.2 –80 –0.3 –120 –0.4 –160 –0.5 –200 2 3 4 5 Voltage,V 10–3 10–6 10–9 AQV216S AQV214S –12 10 0 20 60 40 80 Load voltage, V 100 10. LED forward current vs. turn on time characteristics 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 1.2 0.8 0.6 AQV216S 0.08 AQV215S 0.06 0.4 0.04 0.2 0.02 AQV214S AQV210S AQV217S AQV216S Output capacitance, pF AQV212S 0.10 AQV212S,AQV215S Turn off time, ms Turn on time, ms 1.0 200 0.12 150 100 AQV214S,AQV210S,AQV216S AQV217S 50 AQV214S,AQV210S,AQV217S 0 5/7/2001 10 50 20 30 40 LED forward current, mA 60 0 AQV212S AQV215S 10 50 20 30 40 LED forward current, mA 60 0 0 10 20 30 40 Applied voltage, V 50 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. 49 Go To Online Catalog