CRO2343A-LF PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Radio Equipment • Fixed Wireless Access • Satellite Communication Systems £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2310 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -110 Harmonic Suppression (2nd) -15 Tuning Voltage 0.5 Max Units 2376 MHz dBc/Hz -11 dBc 4.5 Vdc MHz/V 23 Tuning Sensitivity (avg.) 3 dBm Input Capacitance 50 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Power Output -3 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 0 MINI-16-SM Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 21 Vdc 26 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CRO2343A-LF Voltage-Controlled Oscillator Surface Mount Module Rev B2 FREQUENCY (MHz) Tuning Curve, typ. 2400 2390 2380 2370 2360 2350 2340 2330 2320 2310 2300 2290 2280 2270 2260 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 5 4 3 2 1 0 0.030 MIN. CUTBACK FROM LIVE PADS -1 -2 -3 -4 2267 2281 2295 2308 2321 2335 2349 2364 2377 2389 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B