MPU30 SERIES 30W Desk Top Switching Power Supplies For Medical Equipment. Description: The MPU30 series of AC/DC switching mode power supplies provide 30 Watts of continuous output power . All supplies are UL94V-1 min compliant, include IEC-320-C14 input for worldwide applications. They are ideally suited for use in hospital instrument and many other applications. All models meet FCC Part-18 class B and CISPR11 EN55011 class B emission Limits and are designed to comply with UL/c-UL(UL 60601-1) ,TUV/T-mark (EN 60601-1) and new CE requirements. All units are 100% burned in and tested. Features: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single to Triple Output Output Voltage Available From 3VDC Thru 40VDC Optional Output Connector (See appendix) Input Surge Current, Over Voltage And Over Load protection Splash proof Output Voltage Protection(Crowbar Design) Class I Insulation 2 Year Warranty Safety Approvals : Electrical Characteristics: Sym. Parameter Test Conditions Vin Fin Wo Vo Io Input Voltage Input Frequency Output Power Range Output Voltage Range Output Current Range Vin=90 to 264VAC Iil Iih Input Current (Low Line) Input Current ( High Line) Io=Full load, Vin=115 VAC Io=Full load, Vin=230 VAC I rl Low Line Inrush Current I rh High Line Inrush Current Io=Full load, 25 C , Cool start, Vin= 115VAC Io=Full load, 25 C , Cool start, Vin= 230VAC Io=Full Load, Vin=230VAC Eff REG-i REG-o OVP Efficiency OCP Over Current Protection Transient Response Hold-Up Time Ttr Thold Ts Vrn Ilk Tc Line Regulation Load Regulation Over Voltage Protection Operating Voltage Min. Typ . Max. Unit 264 63 90 47 30 0 See rating chart See rating chart 75 Io=Full Load Vin=230VAC A A 12 15 A 26 30 A 83 88 0.5 2 1 10 132 150 % % % Io=Full Load to Half Load, Vin=100VAC 4 12 0.3 V A 0.9 0.34 112 110 Io=Full Load, Vin=110VAC Start Up Time Io=Full Load, Vin=100VAC Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC Safety Ground Leakage C urrent Io = Fu ll Load, V i n = 240 V A C Temperature Coefficient All output VAC Hz W 2 2 0.1 % mA 0.04 %/ C Min. Typ. Max. Unit -0.04 1.5 1 % % mS mS S Environmental : Sym. Toper Tstg Hr Pd Parameter Test Conditions Operating Temperature Storage Temperature Relative Humidity Derate linearly from 100% load at 50 C to 50% load at 70 C 0 -40 5 70 85 95 C C % Safety Specifications: Sym. Parameter Vps Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage Vpg for Primary to Ground Isolation Resistance Ri CISPR EMI requirements for CISPR-11 FCC EMI requirements for FCC PART-18 Test Conditions Min. Typ. Max. Unit Primary to secondary 5600 VDC Primary to ground 2800 VDC 50 B B M CLASS CLASS Test Voltage = 2100VDC Vin=220VAC Vin=110VAC MPU30 SERIES 30W Desk Top Switching Power Supplies For Medical Equipment. Output Voltage And Current Rating Chart (Single Output) : Model Number MPU30-101 MPU30-102 MPU30-103 MPU30-104 MPU30-105 MPU30-106 MPU30-107 MPU30-108 MPU30-109 MPU30-110 Output Voltage 3 5 6 8 11 13 16 21 27 33 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 5 6 8 11 13 16 21 27 33 40 VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC Total Regulation Output Current 6.66 5.00 4.16 3.75 2.72 2.30 1.87 1.42 1.11 0.90 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 4.00 4.16 3.12 2.72 2.30 1.87 1.42 1.11 0.90 0.75 A A A A A A A A A A Maximum Output Power 5% 5% 5% 4% 3% 3% 3% 2% 2% 2% 20W 25W 25W 30W 30W 30W 30W 30W 30W 30W Output Voltage And Current Rating Chart ( Multi Output ) : Model Number Output #2 Output # 1 Output #3 Maximum Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Output Power MPU30-200 MPU30-201 MPU30-202 MPU30-203 MPU30-204 MPU30-209 MPU30-210 MPU30-215 MPU30-301 MPU30-302 MPU30-303 MPU30-304 MPU30-305 MPU30-306 +3.3V +5V +5V +5V +3.3V +12V +15V +5V +5V +5V +5V +5V +5V +3.3V 0.3A 0.3A 0.3A 0.3A 0.3A 0.2A 0.15A 0.25A 0.2A 0.2A 0.2A 0.25A 0.25A 0.25A 3A 3A 3A 3A 3A 2A 1.5A 2.5A 2A 2A 2A 2.5A 2.5A 2.5A 7% 5% 5% 5% 7% 5% 5% 5% 5% 5% 5% 5% 5% 7% +12V +12V +15V +24V +5V 0.13A 0.13A 0.1A 0.07A 0.16A 1.3A 1.3A 1.0A 0.7A 1.6A 5% 5% 5% 5% 5% -12V -15V +12V 0.13A 1.3A +12V 0.1A 1.0A +15V 0.1A 1.0A +24V 0.1A 1.0A +24V 0.1A 1.0A +12V 0.11A 1.1A 5% 5% 5% 5% 5% 5% -24V -5V -12V -15V -24V -12V -5V 0A 0A 0A 0A 0A 0A 0A 0A 0A 0.5A 0.5A 1.0A 0.5A 0.5A 0.5A 0.5A 0.5A 0.5A 10% 10% 10% 10% 10% 10% 10% 10% 10% 25W 30W 30W 30W 17.9W 30W 30W 30W 25W 30W 30W 30W 30W 25W Mechanical Specifications: SWITCHING POWER Note: 1. Dimensions are shown in inches or mm. 2. Weight: 400-460gs approx. 3. Optional output connector: See page Appendix.