0.5mm Pitch Board to Board Connector DF17 Series Solution of Connector Damage Caused when Mobile Phone is Dropped ■Features 1. DF17 series are the connector which has been developed mainly for the mobile phone. Connector Problems Involving in Mobile phone Example: The following problems can be solved; "Connector Damage Caused when Mobile phone is Dropped" "Electrical Discontinuity in Printed Circuit Board is Fixed (Fastened by screws)" Especially, in regard to the resistance to the drop shock, Hirose has developed a new connector structure utilizing its unique technology, and greatly enhanced the resistance to the drop shock. In broad variation development, the connector can be utilized in wide fields of LCD equipment, miniature information terminal equipment and so on, in addition to mobile phones. A319 2. Performance Enhancement The receptacle is designed in a BOX structure and has also enhanced shock-proof, pinch-proof and scoop-proof performance. In addition, the receptacle contact has employed the high scoop-proof bellows type. 3. With Metal Fitting available In order to grade up the strength against the mechanical stress, the metal fitting specification is also available. 4. Broad Variations in Contact Number The connectors are lined up per 10 contacts between 20 and 80 contacts to take countermeasures for multi-signalization. 5. Stacking Height 4 to 8mm The stacking height can be selected (per milimeter) between 4mm and 8mm in combination of the receptacle with the header. 8 7 Stacking 6.5 6 5.5 (mm) 5 4 : Available : Under plan 20 26 30 40 50 60 70 80 DF17#(M)-*DS-0.5V Receptacle 3.0 4.0 100 (Contacts) Receptacle DF17(3.0H)-*DS-0.5V Header Header DF17(1.0H)-*DP-0.5V 4mm 2.0 5mm 6mm 2.5 DF17#(M)-*DP-0.5V 5.5mm 6.5mm 7mm 8mm 4.0 ■ Applications Mobile phones, LCD, miniature equipment and so on A320 Note : The stacking height doesn't include the solder paste thickness. ■Product Specifications Rating Current rating Voltage rating Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 4. Vibration 5. Humidity (Steady state) 6. Temperature Cycle 7. Durability (Mating/un-mating) 8. Resistance to Soldering heat 0.3A 50V AC Operating Temperature Range -35 to 85ç (Note 1) Operating Humidity Range 40 to 80% Specification 500M ohms min. No flashover or insulation breakdown. 60m ohms max. No electrical discontinuity of 1µs or more Contact resistance: 60m ohms max Insulation resistance:250M ohms min Contact resistance: 60m ohms max:Insulation resistance: 500M ohms min Contact resistance: 60m ohms No deformation of components affecting performance. Storage Temperature Range Storage Humidity Range -10 to 60ç(Note 2) 40 to 70% Condition 100V DC 150V AC/1 minute 100mA Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (-55ç: 30 minutes 5 to 35ç: 10 minutes 85ç: 30 minutes 5 to 35ç: 10 minutes) 5 cycles 50 cycles Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Product Receptacle Header Part Material Finish Remarks Insulator Polyamide White UL94V-0 Contact Phosphor copper Gold plated (Note 1) --------------- Metal Fitting Phosphor copper Tin-lead plated --------------- Insulator Polyamide White UL94V-0 Contact Phosphor copper Gold plated (Note 2) --------------- Metal Fitting Phosphor copper Tin-lead plated --------------- Note1: DF17(0.3)-*DS-0.5V : Contact area: gold plating/lead area: flash gold plated DF17(4.0)-*DS-0.5V : Contact area: gold plating/lead area: tin-lead plated DF17(4.0)-*DP-0.5V : Contact area: gold plating/lead area: tin-lead plated Note2: The header gold plated product:Contact area: gold plating/lead area: tin-lead plated DF17(1.0H)-*DS-0.5V only: Contact area: gold plating/lead area: flash gold plated BOrdering Information Please determine the specific product. If needed, please select and orderproducts from the product No. as listed on catalog page A322~A325. ●Receptacle/Header DF17 # 1 2 (**) - * DS - 0.5 V (**) 3 4 1 Series Name: DF17 6 7 8 4 Number of Contacts 2 Type DF17 DF17A DF17B DF17C 5 20,26,30,40,50,6,70,80contacts Fitting K ∞ K ∞ Boss K K ∞ ∞ 5 Connector Type DS: Receptacle DP: Header 6 Contact Pitch: 0.5mm 7 Contact Type V: Straight SMT 3 Product height The stacking height can be determined by adding the figures in parentheses to receptacle and header. 8 Packaging Type (50): Gold plated, embossed tape packaging (51): Gold plated, tube packaging A321 ■Receptacle With metal fitting A B C D 3.9 1.8 4.7 A 5.7 P = 0.5 0.2 0.7 H G 0.2 Ø 0.5 1.5 1.9 E F ● Stacking Height: 4mm Part Number CL No. Number of Contacts A B C D E F DF17(3.0H)-26DS-0.5V(51) 683-0253-2-51 26 11.5 08.3 07.0 06.0 08.5 11.3 DF17(3.0H)-30DS-0.5V(51) 683-0268-0-51 30 12.5 09.3 08.0 07.0 09.5 12.3 DF17(3.0H)-60DS-0.5V(51) 683-0361-5-51 60 20.0 16.8 15.5 14.5 17.0 19.8 G H 3.0 3.0 G H 3.5 3.0 G H 4.5 4.0 ● Stacking Height: 5mm, 7mm Part Number CL No. Number of Contacts A B C D E F DF17(3.0)-20DS-0.5V(51) 683-0002-2-51 20 10.0 06.8 05.5 04.5 07.0 09.8 DF17(3.0)-26DS-0.5V(51) 683-0241-3-51 26 11.5 08.3 07.0 06.0 08.5 11.3 DF17(3.0)-30DS-0.5V(51) 683-0003-5-51 30 12.5 09.3 08.0 07.0 09.5 12.3 DF17(3.0)-40DS-0.5V(51) 683-0004-8-51 40 15.0 11.8 10.5 9.5 12.0 14.8 DF17(3.0)-50DS-0.5V(51) 683-0005-0-51 50 17.5 14.3 13.0 12.0 14.5 17.3 DF17(3.0)-60DS-0.5V(51) 683-0006-3-51 60 20.0 16.8 15.5 14.5 17.0 19.8 DF17(3.0)-70DS-0.5V(51) 683-0007-6-51 70 22.5 19.3 18.0 17.0 19.5 22.3 DF17(3.0)-80DS-0.5V(51) 683-0008-9-51 80 25.0 21.8 20.5 19.5 22.0 24.8 ● Stacking Height: 6mm, 8mm Part Number CL No. Number of Contacts A B C D E F DF17(4.0)-20DS-0.5V(51) 683-0042-7-51 20 10.0 06.8 05.5 04.5 07.0 09.8 DF17(4.0)-30DS-0.5V(51) 683-0043-0-51 30 12.5 09.3 08.0 07.0 09.5 12.3 DF17(4.0)-40DS-0.5V(51) 683-0044-2-51 40 15.0 11.8 10.5 09.5 12.0 14.8 DF17(4.0)-50DS-0.5V(51) 683-0045-5-51 50 17.5 14.3 13.0 12.0 14.5 17.3 DF17(4.0)-60DS-0.5V(51) 683-0046-8-51 60 20.0 16.8 15.5 14.5 17.0 19.8 DF17(4.0)-70DS-0.5V(51) 683-0047-0-51 70 22.5 19.3 18.0 17.0 19.5 22.3 DF17(4.0)-80DS-0.5V(51) 683-0048-3-51 80 25.0 21.8 20.5 19.5 22.0 24.8 Note 1. In regard to this product, the embossed tape packaging is the standard packaging. (1000 pcs./ reel.) If the (50) tube packaging is required, please contact HRS company. Note 2. If the without boss specification is required, please contact HRS sales department. A322 ■Receptacle Without metal fitting A B C D 3.9 1.8 A 4.7 P= 0.5 0.2 0.7 H G 0.2 Ø 0.5 1.9 E ● Stacking Height: 4mm Part Number CL No. Number of Contacts A B C D E DF17A(3.0H)-26DS-0.5V(51) 683-0254-5-51 26 11.5 08.3 07.0 06.0 08.5 DF17A(3.0H)-30DS-0.5V(51) 683-0269-2-51 30 12.5 09.3 08.0 07.0 09.5 DF17A(3.0H)-60DS-0.5V(51) 683-0362-8-51 60 20.0 16.8 15.5 14.5 17.0 G H 3.0 3.0 G H 3.5 3.0 G H 4.5 4.0 ● Stacking Height: 5mm, 7mm Part Number CL No. Number of Contacts A B C D E DF17A(3.0)-20DS-0.5V(51) 683-0012-6-51 20 10.0 06.8 05.5 04.5 07.0 DF17A(3.0)-26DS-0.5V(51) 683-0242-6-51 26 11.5 08.3 07.0 06.0 08.5 DF17A(3.0)-30DS-0.5V(51) 683-0013-9-51 30 12.5 09.3 08.0 07.0 09.5 DF17A(3.0)-40DS-0.5V(51) 683-0014-1-51 40 15.0 11.8 10.5 9.5 12.0 DF17A(3.0)-50DS-0.5V(51) 683-0015-4-51 50 17.5 14.3 13.0 12.0 14.5 DF17A(3.0)-60DS-0.5V(51) 683-0016-7-51 60 20.0 16.8 15.5 14.5 17.0 DF17A(3.0)-70DS-0.5V(51) 683-0017-0-51 70 22.5 19.3 18.0 17.0 19.5 DF17A(3.0)-80DS-0.5V(51) 683-0018-2-51 80 25.0 21.8 20.5 19.5 22.0 ● Stacking Height: 6mm, 8mm Part Number CL No. Number of Contacts A B C D E DF17A(4.0)-20DS-0.5V(51) 683-0052-0-51 20 10.0 06.8 05.5 04.5 07.0 DF17A(4.0)-30DS-0.5V(51) 683-0053-3-51 30 12.5 09.3 08.0 07.0 09.5 DF17A(4.0)-40DS-0.5V(51) 683-0054-6-51 40 15.0 11.8 10.5 9.5 12.0 DF17A(4.0)-50DS-0.5V(51) 683-0055-9-51 50 17.5 14.3 13.0 12.0 14.5 DF17A(4.0)-60DS-0.5V(51) 683-0056-1-51 60 20.0 16.8 15.5 14.5 17.0 DF17A(4.0)-70DS-0.5V(51) 683-0057-4-51 70 22.5 19.3 18.0 17.0 19.5 DF17A(4.0)-80DS-0.5V(51) 683-0058-7-51 80 25.0 21.8 20.5 19.5 22.0 Note 1.In regard to this product, the embossed tape packaging is the standard packaging. (1000 pcs./ reel.) If the (50) tube packaging is required, please contact HRS company. Note 2.If the without boss specification is required, please contact HRS sales department. A323 ■ Header With metal fitting A B C D 3.8 1.8 4.7 A 5.7 P = 0.5 0.7 H 0.25 G 0.2 Ø 0.5 1.5 1.9 E F ● Stacking Height: 4mm Part Number CL No. Number of Contacts A B C D E F DF17(1.0H)-26DP-0.5V(51) 683-0257-3-51 26 11.5 08.2 07.1 06.0 08.5 11.3 DF17(1.0H)-30DP-0.5V(51) 683-0272-7-51 30 12.5 09.2 08.1 07.0 09.5 12.3 DF17(1.0H)-60DP-0.5V(51) 683-0365-6-51 60 20.0 16.7 15.6 14.5 17.0 19.8 G H 3.3 1.0 G H 4.3 2.0 G H 6.3 4.0 ● Stacking Height: 5mm, 6mm Part Number CL No. Number of Contacts A B C D E F DF17(2.0)-20DP-0.5V(51) 683-0082-1-51 20 10.0 06.7 05.6 04.5 07.0 09.8 DF17(2.0)-30DP-0.5V(51) 683-0083-4-51 30 12.5 09.2 08.1 07.0 09.5 12.3 DF17(2.0)-40DP-0.5V(51) 683-0084-7-51 40 15.0 11.7 10.6 09.5 12.0 14.8 DF17(2.0)-50DP-0.5V(51) 683-0085-0-51 50 17.5 14.2 13.1 12.0 14.5 17.3 DF17(2.0)-60DP-0.5V(51) 683-0086-2-51 60 20.0 16.7 15.6 14.5 17.0 19.8 DF17(2.0)-70DP-0.5V(51) 683-0087-5-51 70 22.5 19.2 18.1 17.0 19.5 22.3 DF17(2.0)-80DP-0.5V(51) 683-0088-8-51 80 25.0 21.7 20.6 19.5 22.0 24.8 ● Stacking Height: 7mm, 8mm Part Number CL No. Number of Contacts A B C D E F DF17(4.0)-20DP-0.5V(51) 683-0122-4-51 20 10.0 06.7 05.6 04.5 07.0 09.8 DF17(4.0)-30DP-0.5V(51) 683-0123-7-51 30 12.5 09.2 08.1 07.0 09.5 12.3 DF17(4.0)-40DP-0.5V(51) 683-0124-0-51 40 15.0 11.7 10.6 09.5 12.0 14.8 DF17(4.0)-50DP-0.5V(51) 683-0125-2-51 50 17.5 14.2 13.1 12.0 14.5 17.3 DF17(4.0)-60DP-0.5V(51) 683-0126-5-51 60 20.0 16.7 15.6 14.5 17.0 19.8 DF17(4.0)-70DP-0.5V(51) 683-0127-8-51 70 22.5 19.2 18.1 17.0 19.5 22.3 DF17(4.0)-80DP-0.5V(51) 683-0128-0-51 80 25.0 21.7 20.6 19.5 22.0 24.8 Note 1. In regard to this product, the embossed tape packaging is the standard packaging. (1000 pcs./reel.) If the (50) tube packaging is required, please contact HRS company. Note 2. If the without boss specification is required, please contact HRS sales department. A324 ■Header Without metal fitting A B C D 3.8 1.8 A 4.7 P = 0.5 0.7 H G 0.25 0.2 Ø 0.5 1.9 E ● Stacking Height: 4mm Part Number CL No. Number of Contacts A B C D E DF17A(1.0H)-26DP-0.5V(51) 683-0258-6-51 26 11.5 08.2 07.1 06.0 08.5 DF17A(1.0H)-30DP-0.5V(51) 683-0273-0-51 30 12.5 09.2 08.1 07.0 09.5 DF17A(1.0H)-60DP-0.5V(51) 683-0366-9-51 60 20.0 16.7 15.6 14.5 17.0 G H 3.0 3.0 G H 4.3 2 G H 6.3 4 ● Stacking Height: 5mm, 6mm Part Number CL No. Number of Contacts A B C D E DF17A(2.0)-20DP-0.5V(51) 683-0092-5-51 20 10.0 06.7 05.6 04.5 07.0 DF17A(2.0)-30DP-0.5V(51) 683-0093-8-51 30 12.5 09.2 08.1 07.0 09.5 DF17A(2.0)-40DP-0.5V(51) 683-0094-0-51 40 15.0 11.7 10.6 9.5 12.0 DF17A(2.0)-50DP-0.5V(51) 683-0095-3-51 50 17.5 14.2 13.1 12.0 14.5 DF17A(2.0)-60DP-0.5V(51) 683-0096-6-51 60 20.0 16.7 15.6 14.5 17.0 DF17A(2.0)-70DP-0.5V(51) 683-0097-9-51 70 22.5 19.2 18.1 17.0 19.5 DF17A(2.0)-80DP-0.5V(51) 683-0098-1-51 80 25.0 21.7 20.6 19.5 22.0 ● Stacking Height: 7mm, 8mm Part Number CL No. Number of Contacts A B C D E DF17A(4.0)-20DP-0.5V(51) 683-0132-8-51 20 10.0 06.7 05.6 04.5 07.0 DF17A(4.0)-30DP-0.5V(51) 683-0133-0-51 30 12.5 09.2 08.1 07.0 09.5 DF17A(4.0)-40DP-0.5V(51) 683-0134-3-51 40 15.0 11.7 10.6 9.5 12.0 DF17A(4.0)-50DP-0.5V(51) 683-0135-6-51 50 17.5 14.2 13.1 12.0 14.5 DF17A(4.0)-60DP-0.5V(51) 683-0136-9-51 60 20.0 16.7 15.6 14.5 17.0 DF17A(4.0)-70DP-0.5V(51) 683-0137-1-51 70 22.5 19.2 18.1 17.0 19.5 DF17A(4.0)-80DP-0.5V(51) 683-0138-4-51 80 25.0 21.7 20.6 19.5 22.0 Note 1. In regard to this product, the embossed tape packaging is the standard packaging. (1000 pcs./reel.) If the (50) tube packaging is required, please contact HRS company. Note 2. If the without boss specification is required, please contact HRS sales department. A325 ■ PCB mounting pattern with Metal Fitting ● Receptacle ● Header +0.1 0 0 K _0.1 J D ±0.03 1.9±0.02 2.1 0 S _0.05 6.3 +0.1 0 +0.1 0 P =0.5 ±0.02 Ø0 .6 +0 .0 5 0 0.25±0.02 E±0.03 Number of Contacts Note 1. D E J K S 20 04.5 07.0 10.4 07.6 Receptacle 4.3 30 07.0 09.5 12.9 10.1 Header 4.0 40 09.5 12.0 15.4 12.6 50 12.0 14.5 17.9 15.1 60 14.5 17.0 20.4 17.6 70 17.0 19.5 22.9 20.1 80 19.5 22.0 25.4 22.6 * The recommended solder paste thickness is 150µm. If the pattern is included in the shaded area, and not treated with resist, it could touch the connector contact. Note 2. If the boss isn't included, the boss hole shown in the above figure isn't required. A326 ■PCB mounting pattern without Metal Fitting ● Receptacle ● Header D±0.03 0 _0.05 S 1.9±0.02 +0.1 0 6.3 P = 0.5±0.02 .6 Ø0 5 .0 +0 0 0.25±0.02 0.625±0.02 0.125±0.02 E±0.03 Number of Contacts D E 20 04.5 07.0 Receptacle 4.3 30 07.0 09.5 Header 4.0 40 09.5 12.0 50 12.0 14.5 60 14.5 17.0 70 17.0 19.5 80 19.5 22.0 S * The recommended solder paste thickness is 150µm. Note 1. If the pattern is included in the shaded area, and not treated with resist, it could touch the connector contact. Note 2. If the boss isn't included, the boss hole shown in the above figure isn't required. A327 ■ Packaging Specification ●Embossed Carrier Tape Dimensions .5 Ø1 12±0.1 2±0.1 1.75±0.1 ■Receptacle 4±0.1 .1 +0 0 Y-Y 5 .7 R0 Y Unreeling direction 0.3±0.1 X-X P±0.15 R0 0.2±0.05 +0 .15 0 X X 15 0. + 0 .75 N±0.3 M±0.1 L±0.1 Y Connector L N P Q R Connector L M N P Q R DF17#(3.0)-20DS-0.5V 11.5 24 3.8 24.4 330 DF17#(3.0)-50DS-0.5V 14.2 28.4 32 3.8 32.4 330 14.2 28.4 32 3.8 32.4 330 DF17#(3.0)-30DS-0.5V 11.5 24 3.8 24.4 330 DF17#(3.0)-60DS-0.5V DF17#(3.0)-40DS-0.5V 11.5 24 3.8 24.4 330 DF17#(3.0)-70DS-0.5V 20.2 40.4 44 3.8 44.4 330 DF17#(3.0)-80DS-0.5V 20.2 40.4 44 3.8 44.4 330 Connector L N P Q R Connector L M N P Q R DF17#(4.0)-20DS-0.5V 11.5 24 4.8 24.4 330 DF17#(4.0)-50DS-0.5V 14.2 28.4 32 4.8 32.4 330 DF17#(4.0)-30DS-0.5V 11.5 24 4.8 24.4 330 DF17#(4.0)-60DS-0.5V 14.2 28.4 32 4.8 32.4 330 DF17#(4.0)-40DS-0.5V 11.5 24 4.8 24.4 330 DF17#(4.0)-70DS-0.5V 20.2 40.4 44 4.8 44.4 330 DF17#(4.0)-80DS-0.5V 20.2 40.4 44 4.8 44.4 330 ●Reel Dimensions (Ø 80 ) Ø1.5 Lead hole depth Ø1 3± 0.2 2±0.5 A328 Q +2 0 ØR±2 Product name label Ø2 1± 0. 8 2±0.5 .5 Ø1 12±0.1 2±0.1 1.75±0.1 ■Header 4±0.1 .1 +0 0 Y-Y 5 .7 R0 Unreeling direction Y 0.3±0.1 X-X P±0.15 R0 0.2±0.05 +0 . 0 15 X X 15 0. + 0 .75 N±0.3 M±0.1 L±0.1 Y Connector L N P Q R Connector L M N P Q R DF17#(2.0)-20DP-0.5V 11.5 24 4.6 24.4 330 DF17#(2.0)-50DP-0.5V 14.2 28.4 32 4.6 32.4 330 DF17#(2.0)-30DP-0.5V 11.5 24 4.6 24.4 330 DF17#(2.0)-60DP-0.5V 14.2 28.4 32 4.6 32.4 330 DF17#(2.0)-40DP-0.5V 11.5 24 4.6 24.4 330 DF17#(2.0)-70DP-0.5V 20.2 40.4 44 4.6 44.4 330 DF17#(2.0)-80DP-0.5V 20.2 40.4 44 4.6 44.4 330 Connector L N P Q R Connector L M N P Q R DF17#(4.0)-20DP-0.5V 11.5 24 6.6 24.4 380 DF17#(4.0)-50DP-0.5V 14.2 28.4 32 6.6 32.4 380 DF17#(4.0)-30DP-0.5V 11.5 24 6.6 24.4 380 DF17#(4.0)-60DP-0.5V 14.2 28.4 32 6.6 32.4 380 DF17#(4.0)-40DP-0.5V 11.5 24 6.6 24.4 380 DF17#(4.0)-70DP-0.5V 20.2 40.4 44 6.6 44.4 380 DF17#(4.0)-80DP-0.5V 20.2 40.4 44 6.6 44.4 380 ●Reel Dimensions (Ø 80 ) Ø1.5 Lead hole depth Ø1 3± ØR±2 Product name label Ø2 1± 0. 8 2±0.5 0.2 2±0.5 Q +2 0 A329 ■ Precautions Temperature 250ç IR reflow condition for 100 to 120 seconds Preheating area 150ç Soldering area 235ç5ç for 10 seconds max. 220ç min for 10 to 30 seconds 240ç max. 220ç 200ç 150ç 1. Recommended Temperature Profile 100ç Preheating area (SMT) Soldering area 50ç 0ç 0SSEC 50SSEC 100SSEC 150SSEC 200SSEC Time Note 1. Maximum twice action is allowed under the same condition. However, the interval between the first and second actions must be maintained at the room temperature. Note 2.The temperature indicates the board surface temperature of the connector lead area. 2. Recommended Manual Soldering Condition Soldering iron temperature: 290±10çoldering time: Within 2 seconds (SMT) 3. Recommended Screen Thickness 0.15mm (SMT) 4. Board Warp(SMT) Max 0.2mm in the connector center area, based on the both connector edges 5. Cleaning Condition Refer to the "Nylon Connector Use Hand book". ■ The header is designed in a structure where contacts are exposed. Touching it with bare hands would cause contact failure or electrostatic element damage. ■ Where no board is mounted, the insertion or extraction will cause damage or contact deformation. ■ Avoid retaining the board with the connector only, and fix the board by any other means than the connector. 6. Cautions ■ Excessive scoop insertion or extraction may result in damage. ■ In the manual soldering process, don't carry out the flux coating which will cause a flux blister on the connector. ■ The color phase of this product may be slightly different from that of the formed product according to the manufacturing lot. However, the difference doesn't affect the performance. A330