DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix 6 On-Resistance, +12 V / ± 5 V / +5 V / +3 V, SPST and SPDT Switches DESCRIPTION FEATURES DG417LE, DG418LE, DG419LE analog switches are designed to operate from +3 V to +16 V single supply or ± 3 V to ± 8 V dual supply and are fully specified at +12 V, ± 5 V, +5 V, and +3 V. • +3 V to +16 V single supply, or ± 3 V to ± 8 V dual supply Available • On resistance: 6 for DG417LE, DG418LE 11 for DG419LE Available The DG417LE, DG418LE, DG419LE are lower voltage pin-for-pin compatible companion devices to the industry standard DG417, DG418, and DG419. Each switch conducts equally well in both directions when on, blocks input voltages up to the supply level when off, and exhibits break before switching action. • Fast switching speeds: tON = 20 ns, tOFF = 15 ns Fabricated with advanced CMOS technology, the parts provide low on resistance and fast switching speed with low power dissipation. • 8 pin TSSOP and 8 pin SOIC packages The DG417LE, DG418LE, DG419LE operating temperature range is -40 °C to +85 °C and devices are available in 8 lead TSSOP and SOIC packages. • Break-before-make switching for DG419LE • Fully specified at +12 V, ± 5 V, +5 V, and +3 V • V+ to V- analog signal range • CMOS / TTL compatible • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details APPLICATIONS • Data acquisition systems • Medical instruments • Precision instruments • Communications systems • Automated test equipment • Sample and hold circuit • Audio and video signal routing FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG417LE, DG418LE DG419LE Dual-In-Line, MSOP-8 and SOIC-8 Dual-In-Line, MSOP-8 and SOIC-8 NC/NO 1 8 COM COM 1 8 NO Not Connected 2 7 V- NC 2 7 V- GND 3 6 IN GND 3 6 IN VL V+ 4 5 VL V+ 5 4 Top View Top View TRUTH TABLE (DG417LE, DG418LE) TRUTH TABLE (DG419LE) LOGIC DG417LE DG418LE LOGIC NC NO 0 ON OFF 0 ON OFF 1 OFF ON 1 OFF ON ORDERING INFORMATION (DG417LE, DG418LE) ORDERING INFORMATION (DG419LE) TEMP. RANGE TEMP. RANGE PACKAGE 8-pin narrow SOIC -40 °C to +85 °C 8-pin MSOP S18-0271-Rev. B, 12-Mar-18 PART NUMBER DG417LEDY-T1-GE4 DG418LEDY-T1-GE4 -40 °C to +85 °C PACKAGE PART NUMBER 8-pin narrow SOIC DG419LEDY-T1-GE4 8-pin MSOP DG419LEDQ-T1-GE3 DG417LEDQ-T1-GE3 DG418LEDQ-T1-GE3 Document Number: 76432 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix ABSOLUTE MAXIMUM RATINGS PARAMETER V+ to VGND to VVL IN, COM, NC, NO a Continuous current (any terminal) Peak current, S or D (pulsed 1 ms, 10 % duty cycle) Storage temperature (DQ, DY suffix) 8-pin MSOP c Power dissipation (packages) b 8-pin SOIC c ESD / HBM EIA / JESD22-A114-A ESD / CDM EIA / JESD22-C101-A Latch up JESD78 LIMIT UNIT -0.3 to +18 18 (GND - 0.3) to (V+) + 0.3 -0.3 to (V+ + 0.3) or 30 mA, whichever occurs first V 30 100 -65 to +150 320 400 2K 750 300 mA °C mW V mA Notes a. Signals on NC, NO, COM, or IN exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings b. All leads welded or soldered to PC board c. Derate 6.5 mW/°C above 25 °C S18-0271-Rev. B, 12-Mar-18 Document Number: 76432 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix SPECIFICATIONS (Single Supply 12 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 12 V, V- = 0 V VL = 5 V, VIN = 2.4 V, 0.8 V f TEMP. b TYP. c E SUFFIX D SUFFIX LIMITS LIMITS -40 °C to +125 °C -40 °C to +85 °C UNIT MIN. d MAX. d MIN. d MAX. d Analog Switch Analog signal range e VANALOG Drain-source on-resistance RDS(on) Switch off leakage current INO(off) INC(off) ICOM(off) Switch on leakage current ICOM(on) - 0 12 0 12 V+ = 10.8 V, V- = 0 V Room INO, INC = 5 mA, VCOM = 2 V / 9 V, Full DG417LE / DG418LE only Full 6 - 7 - 7 - - 10 - 9 Room V+ = 10.8 V, V- = 0 V INO, INC = 5 mA, VCOM = 2 V / 9 V, Full DG419LE only 11 - 14 - 14 Room VCOM = 1 V / 11 V VNO, VNC = 11 V / 1 V VNO, VNC = VCOM = 11 V / 1 V - - 20 - 18 ± 0.002 -2 2 -2 2 10 Full - -20 20 -10 Room ± 0.003 -2 2 -2 2 Full - -20 20 -10 10 Room ± 0.006 -2 2 -2 2 Full - -20 20 -10 10 Full 0.02 -1.5 1.5 -1 1 Room 20 - 38 - 38 Full - - 42 - 40 Room 15 - 32 - 32 Full - - 38 - 35 Room 7 - - - - V nA Digital Control Input current IINL or IINH μA Dynamic Characteristics Turn-on time tON Turn-off time tOFF Break-before-make time tBBM RL = 300 , CL = 35 pF VNO, VNC = 5 V DG419LE only, VNC, VNO = 5 V RL = 300 , CL = 35 pF Charge injection e QINJ VGEN = 0 V, RGEN = 0 , CL = 1 nF Room 26 - - - - Off-isolation e OIRR Room -68 - - - - Channel-to-channel crosstalk e XTALK Room -72 - - - - VIN = 0 V or V+, f = 1 MHz, DG417LE / DG418LE only Room 11 - - - - Room 32 - - - - VIN = 0 V or V+, f = 1 MHz, DG419LE only Room 6 - - - - Room 20 - - - - Room 0.00009 - 1 - 1 Full - - 5 - 5 Room -0.00009 -1 - -1 - Full - -5 - -5 - Room 0.00002 - 1 - 1 5 Source off capacitance e Drain-on capacitance e Source off capacitance CNO(off) CNC(off) CON e Drain-on capacitance e CNO(off) CNC(off) CON RL = 50 , CL = 5 pF, f = 1 MHz ns pC dB pF Power Supplies Positive supply current I+ Negative supply current I- Logic supply current IL VIN = 0 V or VL Ground current S18-0271-Rev. B, 12-Mar-18 IGND Full - - 5 - Room -0.00002 -1 - -1 - Full - -5 - -5 - μA Document Number: 76432 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix SPECIFICATIONS (Dual Supply ± 5 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 5 V, V- = -5 V VL = 5 V, VIN = 2.4 V, 0.8 V f TEMP. b TYP. c E SUFFIX D SUFFIX LIMITS LIMITS -40 °C to +85 °C -40 °C to +125 °C UNIT MIN. d MAX. d MIN. d MAX. d Analog Switch Analog signal range e VANALOG Drain-source on-resistance Full - -5 5 -5 5 V+ = 5 V, V- = -5 V INO, INC = 5 mA, VCOM = ± 3.5 V DG417LE / DG418LE only Room 6 - 8 - 8 Full - - 12 - 10 V+ = 5 V, V- = -5 V INO, INC = 5 mA, VCOM = ± 3.5 V DG419LE only Room 12 - 15 - 15 Full - - 24 - 21 Room ± 0.001 -2 2 -2 2 Full - -20 20 -10 10 Room ± 0.002 -2 2 -2 2 Full - -20 20 -10 10 Room ± 0.003 -2 2 -2 2 Full - -20 20 -10 10 Full 0.02 -1.5 1.5 -1 1 Room 21 - 38 - 38 Full - - 43 - 40 Room 20 - 45 - 45 Full - - 55 - 50 tBBM DG419LE only, VNO, VNC = 3.5 V RL = 300 , CL = 35 pF Room 7 - - - - tTRANS RL = 300 , CL = 35 pF VS1 = ± 3.5 V, VS2 = ± 3.5 V Room 21 - - - - VGEN = 0 V, RGEN = 0 , CL = 1 nF RDS(on) INO(off) INC(off) Switch off leakage current a ICOM(off) Channel on leakage current a ICOM(on) V+ = 5.5 V, V- = -5.5 V VCOM = ± 4.5 V VNO, VNC = ± 4.5 V V+ = 5.5 V, V- = -5.5 V VNO, VNC = VCOM = ± 4.5 V V nA Digital Control Input current a IINL or IINH μA Dynamic Characteristics Turn-on time e tON Turn-off time e Break-before-make time tOFF e Transition time Charge injection e QINJ Off-isolation e OIRR Channel-to-channel crosstalk e XTALK Source off capacitance e Drain-on capacitance e Source off capacitance e Drain-on capacitance e CNO(off) CNC(off) CON CNO(off) CNC(off) CON RL = 300 , CL = 35 pF VNO, VNC = ± 3.5 V RL = 50 , CL = 5 pF, f = 1 MHz VIN = 0 V or V+, f = 1 MHz DG417LE / DG418LE only VIN = 0 V or V+, f = 1 MHz DG419LE only Room -17 - - - - Room -69 - - - - Room -73 - - - - Room 11 - - - - Room 33 - - - - Room 6 - - - - Room 20 - - - - Room 0.00007 - 1 - 1 Full - - 5 - 5 Room -0.00009 -1 - -1 - Full - -5 - -5 - Room 0.00002 - 1 - 1 ns pC dB pF Power Supplies Positive supply current e Negative supply current e I+ IVIN = 0 V or VL Logic supply current e Ground current e S18-0271-Rev. B, 12-Mar-18 IL IGND Full - - 5 - 5 Room -0.00003 -1 - -1 - Full - -5 - -5 - μA Document Number: 76432 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix SPECIFICATIONS (Single Supply 5 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 5 V, V- = 0 V VL = 5 V, VIN = 2.4 V, 0.8 V f E SUFFIX LIMITS D SUFFIX LIMITS -40 °C to +125 °C -40 °C to +85 °C TEMP. b TYP. c UNIT MIN. d MAX. d MIN. d MAX. d Analog Switch Analog signal range e VANALOG Drain-source on-resistance e RDS(on) INO(off) INC(off) Switch off leakage current a ICOM(off) Switch on leakage current a ICOM(on) Full - 0 5 0 5 V+ = 4.5 V, INO, INC = 5 mA VCOM = 1 V, 3.5 V DG417LE / DG418LE only Room 12 - 16 - 16 Full - - 20 - 18 V+ = 4.5 V, INO, INC = 5 mA VCOM = 1 V, 3.5 V DG419LE only Room 24 - 35 - 35 Full - - 40 - 37 Room ± 0.002 -1 1 -1 1 Full - -15 15 -10 10 Room ± 0.001 -1 1 -1 1 Full - -15 15 -10 10 Room ± 0.003 -1 1 -1 1 Full - -15 15 -10 10 Full 0.02 -1.5 1.5 -1 1 Room 29 - 46 - 46 V+ = 5.5 V, V- = 0 V VCOM = 1 V / 4.5 V VNO, VNC = 4.5 V / 1 V V+ = 5.5 V, V- = 0 V VNO, VNC = VCOM = 1 V / 4.5 V V nA Digital Control Input current a IINL or IINH μA Dynamic Characteristics Turn-on time e tON RL = 300 , CL = 35 pF VNO, VNC = 3.5 V Full - - 51 - 49 Room 16 - 28 - 28 Full - - 35 - 32 16 - - - - Turn-off time e tOFF Break-before-make time e tBBM DG419LE only, VNO, VNC = 3.5 V RL = 300 , CL = 35 pF Room Charge injection e QINJ VGEN = 0 V, RGEN = 0 , CL = 1 nF Room 10 - - - - Off-isolation e OIRR Room -68 - - - - Channel-to-channel crosstalk e XTALK Room -72 - - - - Room 13 - - - - Room 34 - - - - Room 7 - - - - Room 22 - - - - Room 0.00006 - 1 - 1 Full - - 5 - 5 Room -0.00006 -1 - -1 - Full - -5 - -5 - Room 0.00002 - 1 - 1 Source off capacitance e Drain-on capacitance e Source off capacitance e Drain-on capacitance e CNO(off) CNC(off) CON CNO(off) CNC(off) CON RL = 50 , CL = 5 pF, f = 1 MHz VIN = 0 V or V+, f = 1 MHz DG417LE / DG418LE only VIN = 0 V or V+, f = 1 MHz DG419LE only ns pC dB pF Power Supplies Positive supply current e I+ Negative supply current e I- Logic supply current e IL VIN = 0 V or VL Ground current e IGND Full - - 5 - 5 Room -0.00002 -1 - -1 - Full - -5 - -5 - μA SPECIFICATIONS (Single Supply 3 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 3 V, V- = 0 V VL = 3 V, VIN = 2 V, 0.4 V f E SUFFIX LIMITS D SUFFIX LIMITS -40 °C to +125 °C -40 °C to +85 °C TEMP. b TYP. c UNIT MIN. d MAX. d MIN. d MAX. d Analog Switch S18-0271-Rev. B, 12-Mar-18 Document Number: 76432 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix SPECIFICATIONS (Single Supply 3 V) PARAMETER SYMBOL Analog signal range e TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 3 V, V- = 0 V VL = 3 V, VIN = 2 V, 0.4 V f VANALOG Drain-source on-resistance RDS(on) INO(off) INC(off) Switch off leakage current a ICOM(off) Channel on leakage current a ICOM(on) V+ = 2.7 V, V- = 0 V INO, INC = 5 mA, VCOM = 0.5 V, 2.2 V DG417LE / DG418LE only V+ = 2.7 V, V- = 0 V INO, INC = 5 mA, VCOM = 0.5 V, 2.2 V DG419LE only 38 Full - - 80 - 75 Room Full Room Full Room Full ± 0.002 ± 0.001 ± 0.002 - -1 -15 -1 -15 -1 -15 1 15 1 15 1 15 -1 -10 -1 -10 -1 -10 1 10 1 10 1 10 nA Full 0.02 -1.5 1.5 -1 1 μA RL = 300 , CL = 35 pF VNO, VNC = 1.5 V Room Full Room Full 59 33 - - 77 83 54 75 - 77 81 54 69 Room 31 - - - - V+ = 3.3 V, V- = 0 V VCOM = 1 V, 2 V, VNO, VNC = 2 V, 1 V V+ = 3.3 V, V- = 0 V VNO, VNC = VCOM = 1 V, 2 V QINJ VGEN = 0 V, RGEN = 0 , CL = 10 nF I- Logic supply current e IL RL = 50 , CL = 5 pF, f = 1 MHz VIN = 0 V or V+, f = 1 MHz DG417LE / DG418LE only VIN = 0 V or V+, f = 1 MHz DG419LE only VIN = 0 V or VL Ground current e IGND V 68 OIRR Negative supply current e 3 34 - Off-isolation e Channel-to-channel crosstalk e I+ 0 - - Charge injection e Positive supply current e 3 34 40 DG419LE only, VNO, VNC = 1.5 V RL = 300 , CL = 35 pF Channel on capacitance e Power Supplies 0 - 68 tBBM Source off capacitance MAX. d - Break-before-make time e e MIN. d - tOFF Channel on capacitance MAX. d - Turn-off time e 22 UNIT MIN. d 43 tON CNO(off) CNC(off) CD(on) CNO(off) CNC(off) CD(on) Full Room TYP. c Full Turn-on time Source off capacitance e TEMP. b Room Digital Control IINL or IINH Input current a Dynamic Characteristics XTALK E SUFFIX LIMITS D SUFFIX LIMITS -40 °C to +125 °C -40 °C to +85 °C Room 6 - - - - Room -68 - - - - Room -71 - - - - Room 14 - - - - Room 35 - - - - Room 8 - - - - Room 23 - - - - Room Full Room Full Room Full Room Full 0.00005 -0.00007 0.00002 -0.00002 - -1 -5 -1 -5 1 5 1 5 - -1 -5 -1 -5 1 5 1 5 - ns pC dB pF μA Notes a. Leakage parameters are guaranteed by worst case test condition and not subject to production test b. Room = 25 °C, Full = as determined by the operating temperature suffix c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet e. Guaranteed by design, not subject to production test f. VIN = input voltage to perform proper function Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S18-0271-Rev. B, 12-Mar-18 Document Number: 76432 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title Axis Title V+ = +3.0 V 50 1000 40 1st line 2nd line 2nd line RON - On-Resistance (Ω) 60 V+ = +4.5 V 30 V+ = +5.0 V V+ = +10.8 V 20 10000 DG419LE IS = 5 mA 100 14 1000 12 V± = ± 4.5 V 1st line DG419LE IS = 5 mA V+ = +2.7 V 16 10000 2nd line RON - On-Resistance (Ω) 70 10 100 V± = ± 5.5 V 8 10 V± = ± 5.0 V V+ = +12 V 0 6 10 0 2 4 6 8 10 12 10 -6 14 -4 -2 2 4 6 VCOM - Analog Voltage (V) 2nd line VCOM - Analog Voltage (V) 2nd line RDS(on) vs. VCOM and Supply Voltage RDS(on) vs. VCOM and Supply Voltage Axis Title Axis Title V+ = +2.7 V 35 30 8 10000 7.5 V+ = +3.0 V 1000 25 V+ = +4.5 V 20 V+ = +5.0 V V+ = +10.8 V 15 10000 DG417/8LE IS = 5 mA 100 10 5 7 1000 6.5 1st line 2nd line DG417/8LE IS = 5 mA 2nd line RON - On-Resistance (Ω) 40 2nd line RON - On-Resistance (Ω) 0 V± = ± 4.5 V 6 5.5 100 5 V± = ± 5.5 V 4.5 V+ = +12 V 0 2 4 6 8 10 12 V± = ± 5.0 V 4 10 0 -6 14 -4 -2 0 10 2 4 6 VCOM - Analog Voltage (V) 2nd line VCOM - Analog Voltage (V) 2nd line RDS(on) vs. VCOM and Supply Voltage RDS(on) vs. VCOM and Supply Voltage Axis Title Axis Title 25 10000 10000 15 1000 10 100 5 DG419LE V+ = +10.8 V IS = 5 mA 0 0 1 2 3 -40 °C 10 4 5 6 7 8 9 10 11 12 20 +25 °C +125 °C +85 °C 1000 15 1st line 2nd line +85 °C 2nd line RON - On-Resistance (Ω) +25 °C +125 °C 1st line 2nd line 2nd line RON - On-Resistance (Ω) 20 10 100 5 0 DG419LE V± = ± 5 V IS = 5 mA -6 -5 -4 -3 -2 -1 -40 °C 10 0 1 2 3 4 5 6 VCOM - Analog Voltage (V) 2nd line VCOM - Analog Voltage (V) 2nd line RDS(on) vs. Analog Voltage and Temperature RDS(on) vs. Analog Voltage and Temperature S18-0271-Rev. B, 12-Mar-18 Document Number: 76432 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title Axis Title 10000 40 DG419LE V+ = +4.5 V IS = 5 mA 20 100 +25 °C 15 10 10 1 2 3 60 4 1000 +125 °C 50 40 -40 °C 10 10 0 5 1 3 VCOM - Analog Voltage (V) 2nd line RDS(on) vs. Analog Voltage and Temperature RDS(on) vs. Analog Voltage and Temperature Axis Title 10000 +85 °C 1000 100 +25 °C DG417/8LE V+ = +10.8 V IS = 5 mA 0 1 2 3 2nd line RON - On-Resistance (Ω) +125 °C - 40 °C 10 4 5 6 7 8 12 11 10 9 8 7 6 5 4 3 2 1 0 9 10 11 12 10000 +125 °C +85 °C 1000 1st line 2nd line 12 11 10 9 8 7 6 5 4 3 2 1 0 1st line 2nd line 100 +25 °C DG417/8LE V± = ± 5V IS = 5 mA -40 °C 10 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 VCOM - Analog Voltage (V) 2nd line VCOM - Analog Voltage (V) 2nd line RDS(on) vs. Analog Voltage and Temperature RDS(on) vs. Analog Voltage and Temperature Axis Title Axis Title DG417/8LE V+ = +4.5 V IS = 5 mA 10000 +125 °C +85 °C 1st line 2nd line 1000 100 +25 °C - 40 °C 0 1 2 10 3 4 5 10000 DG417/8LE V+ = +2.7 V IS = 5 mA 55 45 +125 °C 1000 +85 °C 1st line 2nd line 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 2nd line RON - On-Resistance (Ω) 2nd line RON - On-Resistance (Ω) 2 VCOM - Analog Voltage (V) 2nd line Axis Title 2nd line RON - On-Resistance (Ω) 100 +25 °C 30 20 -40 °C +85 °C 1st line 2nd line 25 2nd line RON - On-Resistance (Ω) 1000 30 0 DG419LE V+ = +2.7 V IS = 5 mA 70 +125 °C +85 °C 1st line 2nd line 2nd line RON - On-Resistance (Ω) 35 10000 80 35 25 100 15 +25 °C -40 °C 5 0 0.5 1 10 1.5 2 2.5 3 VCOM - Analog Voltage (V) 2nd line VCOM - Analog Voltage (V) 2nd line RDS(on) vs. Analog Voltage and Temperature RDS(on) vs. Analog Voltage and Temperature S18-0271-Rev. B, 12-Mar-18 Document Number: 76432 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title Axis Title 6000 6000 10000 4000 INO/NC(OFF), VCOM = 11 V, VNO/NC = 1 V INO/NC(OFF), VCOM = 4.5 V, VNO/NC = -4.5 V 1000 ICOM(OFF), VCOM = 11 V, VNO/NC = 1 V -4000 ICOM(OFF), VCOM = 1 V, VNO/NC = 11 V -6000 100 -8000 ICOM(ON), VCOM/NO/NC = 11 V -10 000 -12 000 V+ = +12 V 0 ICOM(ON), VCOM/NO/NC = 1 V 20 40 60 -4000 ICOM(OFF), VCOM = -4.5 V, VNO/NC = 4.5 V -6000 100 -8000 -12 000 ICOM(ON), VCOM/NO/NC = 4.5 V 80 V ± = ± 5.5 V ICOM(ON), VCOM/NO/NC = -4.5 V -14 000 10 -20 1000 ICOM(OFF), VCOM = 4.5 V, VNO/NC = -4.5 V -10 000 -14 000 -40 0 -2000 100 120 10 -40 -20 0 20 40 60 80 100 120 Temperature (°C) 2nd line Temperature (°C) 2nd line Leakage Current vs. Temperature Leakage Current vs. Temperature Axis Title Axis Title 10000 6000 10000 6000 INO/NC(OFF), VCOM = 1 V, VNO/NC = 4.5 V 4000 1st line 2nd line 0 -2000 2nd line Leakage Current (pA) 2000 1st line 2nd line 2nd line Leakage Current (pA) 2000 10000 INO/NC(OFF), VCOM = -4.5 V, VNO/NC = 4.5 V INO/NC(OFF), VCOM = 1 V, VNO/NC = 11 V 4000 INO/NC(OFF), VCOM = 1 V, VNO/NC = 2 V 4000 INO/NC(OFF), VCOM = 4.5 V, VNO/NC = 1 V 0 -2000 ICOM(OFF), VCOM = 1 V, VNO/NC = 4.5 V 100 -4000 ICOM(ON), VCOM/NO/NC = 4.5 V -6000 1000 0 -2000 100 ICOM(OFF), VCOM = 1 V, VNO/NC = 2 V -4000 ICOM(ON), VCOM/NO/NC = 2 V ICOM(ON), VCOM/NO/NC = 1 V V+ = +3.3 V -8000 -20 0 20 40 60 80 ICOM(ON), VCOM/NO/NC = 1 V -8000 10 100 120 10 -40 -20 0 20 40 60 80 100 120 Temperature (°C) 2nd line Temperature (°C) 2nd line Leakage Current vs. Temperature Leakage Current vs. Temperature Axis Title 10000 350 250 1st line 2nd line 1000 200 150 100 100 50 0 10 -40 -20 0 20 40 60 80 100 120 140 2nd line Loss, OIRR, XTALK (dB) V+ = +12 V IN = V+ or GND Axis Title 10 Loss 0 -10 -20 -30 -40 OIRR -50 -60 XTALK -70 -80 -90 -100 V± = ± 5 V -110 100K 1M 10M 10000 1000 1st line 2nd line -40 2nd line I+ - Supply Current (nA) ICOM(OFF), VCOM = 2 V, VNO/NC = 1 V -6000 V+ = +5.5 V 300 2000 1st line 2nd line 1000 2nd line Leakage Current (pA) ICOM(OFF), VCOM = 4.5 V, VNO/NC = 1 V 1st line 2nd line 2nd line Leakage Current (pA) INO/NC(OFF), VCOM = 2 V, VNO/NC = 1 V 2000 100 10 100M 1G Temperature (°C) 2nd line Frequency (Hz) 2nd line Supply Current vs. Temperature Insertion Loss, Off-Isolation Crosstalk vs. Frequency S18-0271-Rev. B, 12-Mar-18 Document Number: 76432 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title Axis Title 10000 10 000 10000 10 000 I+ V± = ± 5 V 1000 1000 10 V+ = +5 V 1 V+ = +3 V 0.1 0.01 100 0.001 0.0001 100 I- 1000 10 1st line 2nd line V+ = +12 V 2nd line I+ - Supply Current (μA) 100 1st line 2nd line 1 0.1 0.01 100 IGND 0.001 0.0001 0.00001 10 100 1000 10K 100K 0.00001 10 10M 1M 10 1000 Input Switching Frequency (Hz) 2nd line Input Switching Frequency (Hz) 2nd line Supply Current vs. Input Switching Frequency Supply Current vs. Input Switching Frequency Axis Title Axis Title 30 V+ = +3 V, tON 60 1000 50 40 V+ = +5 V, tON 30 100 V+ = +3 V, tOFF 20 V+ = +5 V, tOFF 10 0 0 50 100 25 V± = ±5 V, tON 1000 20 V+ = +12 V, tON V± = ±5 V, tOFF 15 100 V+ = +12 V, tOFF 10 5 10 -50 10000 150 10 -50 0 50 100 Temperature (°C) 2nd line Temperature (°C) 2nd line Switching Time vs. Temperature Switching Time vs. Temperature 10000 -40 °C to +125 °C VINH 1000 1st line 2nd line 1.6 1.4 VINL 1.2 100 1.0 VL = V+ V- = -V+ 0.8 0.6 10 3 4 5 6 7 8 9 2nd line VIN - Switching Threshold (V) 2.0 1.8 150 Axis Title Axis Title 2.2 2 1st line 2nd line 70 2nd line tON, tOFF - Switching Time (ns) 10000 1st line 2nd line 2nd line tON, tOFF - Switching Time (ns) 80 2nd line VIN - Switching Threshold (V) 10 10M 100K 3.6 3.4 3.2 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 10000 -40 °C to +125 °C VINH 1000 1st line 2nd line 2nd line I+ - Supply Current (μA) 1000 VINL 100 VL = V+ 10 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 V+ - Dual Supply Voltage (V) 2nd line V+ - Single Supply Voltage (V) 2nd line Switching Threshold vs. Dual Supply Voltage Switching Threshold vs. Single Supply Voltage S18-0271-Rev. B, 12-Mar-18 Document Number: 76432 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title DG417/8LE DG419LE 30.0 V+ = 5 V -5.0 1st line 2nd line 1000 V± = ±5 V -25.0 100 V+ = 12 V V+ = 16 V -35.0 20.0 10.0 1000 V+ = 3 V 0 1st line 2nd line V+ = 3 V -15.0 10000 40.0 2nd line QINJ - Charge Injection (pC) 5.0 2nd line QINJ - Charge Injection (pC) Axis Title 10000 V± = ± 5 V -10.0 -20.0 10 -10 -5 0 5 10 15 -50.0 20 100 -30.0 V+ = 12 V -40.0 -45.0 V+ = 16 V V+ = 5 V -10 -5 0 5 10 15 VNC/NO - Analog Voltage (V) 2nd line VNC/NO - Analog Voltage (V) Charge Injection vs. Analog Voltage Charge Injection vs. Analog Voltage 20 10 Axis Title 10000 10 000 VL = V+ 100 V+ = 12 V 1000 10 1 1st line 2nd line 2nd line IL - Supply Current (μA) 1000 V+ = 5 V 0.1 V+ = 3 V 0.01 100 0.001 0.0001 0.00001 0 2.0 4.0 6.0 8.0 10.0 12.0 10 14.0 VIN (V) 2nd line Supply Current vs. Enable Input Voltage S18-0271-Rev. B, 12-Mar-18 Document Number: 76432 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix SCHEMATIC DIAGRAM (Typical Channel) V+ S VL VLevel Shift/ Drive VIN V+ GND D V- Fig. 1 - Schematic Diagram TEST CIRCUITS VL V+ Logic Input VINH tr < 5 ns tf < 5 ns 50 % VINL Switch Input VIN VL Switch Output V+ NO or NC COM tOFF VOUT VOUT IN RL 300 Ω V- GND CL 35 pF Switch Output 90 % 0.9 x V OUT 0V tON VCL (includes fixture and stray capacitance) RL VOUT = V IN Note: RL + R ON Logic input waveform is inverted for switches that have the opposite logic sense control Fig. 2 - Switching Time VL V+ VL VNO VNC Logic Input V+ tr < 5 ns tf < 5 ns VINL COM NO VINH VO NC RL 300 Ω IN GND V- CL 35 pF VNC = VNO VO Switch Output 90 % 0V tD tD VCL (includes fixture and stray capacitance) Fig. 3 - Break-Before-Make (DG419LE) S18-0271-Rev. B, 12-Mar-18 Document Number: 76432 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix TEST CIRCUITS +5V + 15 V VL V+ NO or NC Logic VINH Input VINL COM VS1 VO NC or NO VS2 RL 300 Ω IN tr < 5 ns tf < 5 ns 50 % tTRANS CL 35 pF tTRANS VS1 V01 V- GND 90 % Switch Output 10 % V02 VS2 VCL (includes fixture and stray capacitance) RL VO = V S RL + R ON Fig. 4 - Transition Time (DG419LE) VL V+ VL V+ VO VO Rg NO or NC COM IN Vg IN VO OFF ON CL 1 nF Q = VO x CL V- GND OFF IN dependent on switch configuration input polarity determined by sense of switch. VVIN = 0 - V+ Fig. 5 - Charge Injection VL V+ C C VL VS VIN NO or NC V+ COM Rg = 50 50 IN 0 V or 2.4 V NC or NO VOUT GND XTA LK Isolation = 20 log V- C VOUT VIN V- C = RF bypass Fig. 6 - Crosstalk (DG419LE) S18-0271-Rev. B, 12-Mar-18 Document Number: 76432 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG417LE, DG418LE, DG419LE www.vishay.com Vishay Siliconix TEST CIRCUITS V+ VL C C NO or NC COM Rg = 50 Ω RL 50 Ω IN 0 V, 2.4 V GND V- C VOff Isolation = 20 log C = RF Bypass VCOM VNO/NC Fig. 7 - Off Isolation VL V+ C C VL V+ COM Meter IN HP4192A Impedance Analyzer or Equivalent 0 V, 2.4 V NO or NC GND V- C f = 1 MHz V- Fig. 8 - Source / Drain Capacitances Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and reliability data, see www.vishay.com/ppg?76432. S18-0271-Rev. B, 12-Mar-18 Document Number: 76432 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000