RoHS ES1A THRU ES1M ES1A THRU ES1M D T ,. L SURFACE MOUNTED SUPER FAST RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 1.0A Features SMA/DO-214AC ◆ Glass passivated junction chip ◆ For surface mounted application ◆ Low profile package ◆ Built-in strain relief ◆ High surge capability ◆ High temperature soldering guaranteed 250℃/10sec/at terminal/complete device ◆ Superfast recovery time for high efficiency Mechanical data ◆ IC Cases: Molded with UL-94 class V-0 recognized Flame Retardant Epoxy ◆ Terminals: Plated axial leads solderable MIL-STD 202E, method 208C ◆ Polarity: Color band denote cathode end ◆ Weight:0.002 ounce, 0.064 gram R T Maximum ratings and electrical characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. C E L For capacitive load, derate current by 20% Parameter O N C O Dimensions in inches and (millimeters) Symbols ES1A ES1B ES1D ES1G ES1J ES1K ES1M Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 550 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC blocking Voltage E Maximum average forward rectified current 3/8” lead length at TL=100℃ Peak forward surge current 8.3ms single half J E sine-wave superimposed on rated load Maximum instantaneous forward voltage at rated forward current Maximum DC reverse current Ta=25℃ W At rated DC blocking voltage Ta=125℃ IF(AV) 1.0 A IFSM 30.0 A VF 0.95 IR 1.3 1.7 V 10.0 µA 100.00 µA Maximum Reverse Recovery Time Trr 35 nS Typical junction capacitance CJ 20.0 pF Typical thermal resistance RJA 60.0 ℃/W Storage and operating junction temperature TSTG -50 to +150 Notes: 1. Measured at 1.0MHz and applied voltage of 4.0Vdc 2. Thermal resistance from junction to terminal mounted on 5×5mm copper pad area 3. Reverse recovery condition If=1.0A,Irr=0.25A WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[email protected] ℃