FEDR27T802F-002-06 Issue Date: Oct. 01, 2008 MR27T802F 512k–Word × 16–Bit or 1M–Word × 8–Bit P2ROM FEATURES PIN CONFIGURATION (TOP VIEW) · 512k-word × 16-bit / 1M-word × 8-bit electrically switchable configuration · +2.7 V to 3.6 V power supply · Access time ................. 80 ns MAX · Operating current ........ 18 mA MAX(5MHz) · Standby current ........... 5 µA MAX · Input/Output TTL compatible · Three-state output PACKAGES · MR27T802F-xxxTN 48-pin plastic TSOP (TSOP I 48-P-1220-0.50-1K) · MR27T802F-xxxMA 44-pin plastic SOP (SOP44-P-600-1.27-K) NC A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE# VSS OE# D0 D8 D1 D9 D2 D10 D3 D11 1 44 NC 2 43 NC 3 42 A8 4 41 A9 5 40 A10 6 39 A11 7 38 A12 8 37 A13 9 36 A14 10 35 A15 11 34 A16 12 33 BYTE# 13 32 VSS 14 31 D15/A–1 15 30 D7 16 29 D14 17 28 D6 18 27 D13 19 26 D5 20 25 D12 21 24 D4 22 23 VCC P2ROM ADVANCED TECHNOLOGY P2ROM stands for Production Programmed ROM. This exclusive LAPIS Semiconductor technology utilizes factory test equipment for programming the customers code into the P2ROM prior to final production testing. Advancements in this technology allows production costs to be equivalent to MASKROM and has many advantages and added benefits over the other non-volatile technologies, which include the following; · Short lead time, since the P2ROM is programmed at the final stage of the production process, a large P2ROM inventory "bank system" of un-programmed packaged products are maintained to provide an aggressive lead-time and minimize liability as a custom product. · No mask charge, since P2ROMs do not utilize a custom mask for storing customer code, no mask charges apply. · No additional programming charge, unlike Flash and OTP that require additional programming and handling costs, the P2ROM already has the code loaded at the factory with minimal effect on the production throughput. The cost is included in the unit price. · Custom Marking is available at no additional charge. · Pin Compatible with Mask ROM and some FLASH products. 44SOP A15 A14 A13 A12 A11 A10 A9 A8 NC NC NC NC NC NC NC A18 A17 A7 A6 A5 A4 A3 A2 A1 1 48 A16 2 47 BYTE# 3 46 VSS 4 45 D15/A–1 5 44 D7 6 43 D14 7 42 D6 8 41 D13 9 40 D5 10 39 D12 11 38 D4 12 37 VCC 13 36 D11 14 35 D3 15 34 D10 16 33 D2 17 32 D9 18 31 D1 19 30 D8 20 29 D0 21 28 OE# 22 27 VSS 23 26 CE# 24 25 A0 48TSOP(Type-I) 1/9 FEDR27T802F-002-06 MR27T802F / P2ROM BLOCK DIAGRAM A–1 OE# CE OE Row Decoder CE# BYTE# Memory Cell Matrix 512k × 16-Bit or 1M × 8-Bit Column Decoder A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 Address Buffer × 8/× 16 Switch Multiplexer Output Buffer D0 D2 D1 D4 D3 D6 D5 D8 D7 D10 D9 D12 D11 D14 D13 D15 In 8-bit output mode, these pins are placed in a high-Z state and pin D15 functions as the A-1 address pin. PIN DESCRIPTIONS Pin name D15 / A–1 A0 to A18 D0 to D14 CE# OE# BYTE# VCC VSS NC Functions Data output / Address input Address inputs Data outputs Chip enable input Output enable input Word / Byte select input Power supply voltage Ground No connect 2/9 FEDR27T802F-002-06 MR27T802F / P2ROM FUNCTION TABLE Mode Read (16-Bit) Read (8-Bit) CE# L L OE# L L Output disable L H Standby H ∗ BYTE# H L H L H L VCC D0 to D7 DOUT 3.0V D8 to D14 DOUT Hi–Z D15/A–1 Hi–Z ∗ Hi–Z ∗ L/H ∗: Don’t Care (H or L) ABSOLUTE MAXIMUM RATINGS Parameter Operating temperature under bias Storage temperature Input voltage Output voltage Power supply voltage Power dissipation per package Output short circuit current Symbol Ta Tstg VI VO VCC PD IOS Condition — relative to VSS Ta = 25°C — Value 0 to 70 –55 to 125 –0.5 to VCC+0.5 –0.5 to VCC+0.5 –0.5 to 5 1.0 10 Unit °C °C V V V W mA RECOMMENDED OPERATING CONDITIONS Parameter VCC power supply voltage Input “H” level Input “L” level Symbol VCC VIH VIL Condition VCC = 2.7 to 3.6 V Min. 2.7 2.2 –0.5∗∗ Typ. — — — (Ta = 0 to 70°C) Max. Unit 3.6 V VCC+0.5∗ V 0.6 V Voltage is relative to VSS. ∗ : Vcc+1.5V(Max.) when pulse width of overshoot is less than 10ns. ∗∗ : -1.5V(Min.) when pulse width of undershoot is less than 10ns. PIN CAPACITANCE Parameter Input BYTE# Output Symbol CIN1 CIN2 COUT Condition VI = 0 V VO = 0 V Min. — — — (VCC = 3.3 V, Ta = 25°C, f = 1 MHz) Typ. Max. Unit — 8 pF — 100 — 10 3/9 FEDR27T802F-002-06 MR27T802F / P2ROM ELECTRICAL CHARACTERISTICS DC Characteristics (VCC = 2.7 V to 3.6 V, Ta = 0 to 70°C) Min. Typ. Max. Unit — — 5 μA — — 5 μA — — 5 μA — — 1 mA Parameter Input leakage current Output leakage current VCC power supply current (Standby) Symbol ILI ILO ICCSC ICCST Condition VI = 0 to VCC VO = 0 to VCC CE# = VCC CE# = VIH VCC power supply current (Read) ICCA CE# = VIL, OE# = VIH tc = 200 ns — — 18 mA Input “H” level Input “L” level Output “H” level Output “L” level VIH VIL VOH VOL — — IOH = –1 mA IOL = 2 mA 2.2 –0.5∗∗ 2.4 — — — — — VCC+0.5∗ 0.6 — 0.4 V V V V Voltage is relative to VSS. ∗ : Vcc+1.5V(Max.) when pulse width of overshoot is less than 10ns. ∗∗ : -1.5V(Min.) when pulse width of undershoot is less than 10ns. AC Characteristics Parameter Address cycle time Address access time CE# access time OE# access time Symbol tC tACC tCE tOE tCHZ tOHZ tOH Output disable time Output hold time Condition — CE# = OE# = VIL OE# = VIL CE# = VIL OE# = VIL CE# = VIL CE# = OE# = VIL (VCC = 2.7 V to 3.6 V, Ta = 0 to 70°C) Min. Max. Unit 80 — ns — 80 ns — 80 ns — 30 ns 0 20 ns 0 20 ns 0 — ns Measurement conditions Input signal level --------------------------------------0 V / Vcc Input timing reference level-------------------------1/2Vcc Output load ---------------------------------------------50 pF Output timing reference level ----------------------1/2Vcc Output load Output 50 pF (Including scope and jig) 4/9 FEDR27T802F-002-06 MR27T802F / P2ROM TIMING CHART (READ CYCLE) 16-Bit Read Mode (BYTE# = VIH) tC tC A0 to A18 tOH tACC tCE CE# tOE tCHZ tOH OE# tOHZ tACC D0 to D15 Valid Data Hi-Z Valid Data Hi-Z 8-Bit Read Mode (BYTE# = VIL) tC tC A-1 to A18 tOH tACC tCE CE# tOE tCHZ tOH OE# tOHZ tACC D0 to D7 Hi-Z Valid Data Valid Data Hi-Z 5/9 FEDR27T802F-002-06 MR27T802F / P2ROM PACKAGE DIMENSIONS (Unit: mm) Notes for Mounting the Surface Mount Type Package The surface mount type packages are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact ROHM’s responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 6/9 FEDR27T802F-002-06 MR27T802F / P2ROM (Unit: mm) Notes for Mounting the Surface Mount Type Package The surface mount type packages are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact ROHM’s responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 7/9 FEDR27T802F-002-06 MR27T802F / P2ROM REVISION HISTORY Document No. Page Date Previous Edition Current Edition – – 3, 4 3, 4 Description FEDR27T802F-02-01 Dec., 2002 FEDR27T802F-02-02 Jun. 17, 2003 FEDR27T802F-02-03 Jul. 9, 2004 3 3 FEDR27T802F-02-04 Sep. 3, 2004 1 1, 7 Add MR27T802F-xxxMA FEDR27T802F-02-05 Dec. 28, 2004 1 1, 8 Add MR27T802F-xxxTP 1,8 1 4 4 – – FEDR27T802F-002-06 Oct. 1, 2008 Final edition 1 Change Operating temperature under bias (Ta) to 0 to 70°C. Add PD condition and IOS = 10mA Deleted 44TSOPII package Changed Input signal level from “0V/3V” to “0V/Vcc” Changed company logo and name to OKI SEMICONDUCTOR 8/9 FEDR27T802F-002-06 MR27T802F / P2ROM NOTICE No copying or reproduction of this document, in part or in whole, is permitted without the consent of LAPIS Semiconductor Co., Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing LAPIS Semiconductor's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from LAPIS Semiconductor upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, LAPIS Semiconductor shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. LAPIS Semiconductor does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by LAPIS Semiconductor and other parties. LAPIS Semiconductor shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While LAPIS Semiconductor always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. LAPIS Semiconductor shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). LAPIS Semiconductor shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Copyright 2008 - 2011 LAPIS Semiconductor Co., Ltd. 9/9