IRL1601C RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION IRL1606C GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 800 Volts CURRENT 16 Amperes FEATURES * * * * * * Low power loss, high efficiency Low forward voltage drop Low thermal resistance High current capability High surge capability High reliability ITO-220 MECHANICAL DATA * * * * * * .406(10.3) .382(9.7) .114(2.9) .098(2.5) Case: ITO-220 molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 2.24 grams Polarity: As marked .185(4.7) .169(4.3) .138(3.5) .122(3.1) .134(3.4) .110(2.8) .602(15.3) .579(14.7) .154 (3.9) .138 (3.5) .531(13.5) .492(12.5) .071(1.8) .055(1.4) .055(1.4) .039(1.0) .035(0.9) .020(0.5) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .031(0.8) .016 (0.4) .108(2.75) .091(2.30) For capacitive load, derate current by 20%. .114(2.9) .098(2.5) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL RATINGS IRL1601C IRL1602C IRL1603C IRL1604C IRL1605C IRL1606C UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 Maximum Average Forward Rectified Current T C = 100oC (Note 1) Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range Volts IO 16.0 Amps I FSM 200 Amps RθJC 3.0 0 CJ 40 T J , T STG -55 to + 150 SYMBOL IRL1601C IRL1602C IRL1603C IRL1604C IRL1605C IRL1606C VF 1.1 C/ W pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 8.0A DC Maximum DC Reverse Current @T C = 25 o C at Rated DC Blocking Voltage @T C = 100 o C NOTES : 1.Case Temperature Measured at Metal Tab. 2.Measured at 1 MHZ and applied reverse voltage of 4.0 volts. 3.Suffix “ A “ = Common Anode. IR 10 UNITS Volts uAmps 100 2002-11 1000 16.0 12.0 8.0 Single Phase Half Wave 60Hz Inductive or Resistive Load 4.0 0 0 50 100 CASE TEMPERATURE, ( 150 ) FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 8.3ms Single Half Sine-Wave (JEDED Method) 250 INSTANTANEOUS REVERSE CURRENT, (uA) 20.0 200 TC = 100 100 10 TC = 25 1.0 0.1 0 150 100 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 50 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 FIG. 4 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) FIG. 2 - TYPICAL REVERSE CHARACTERISTICS FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 200 100 60 40 20 10 TJ = 25 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 REVERSE VOLTAGE, ( V ) 40 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( IRL1601C THRU IRL1606C ) FIG. 5 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 80 40 20 10 4 1.0 .4 TJ = 25 Pulse Width = 300us 1% Duty Cycle .1 .5 .6 .7 .8 .9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, (V) RECTRON