FR1601CT thru FR1607CT Pb FR1601CT thru FR1607CT Pb Free Plating Product 16.0 Ampere Heatsink Dual Common Cathode Fast Recovery Rectifiers Features Fast switching for high efficiency Low forward voltage drop High current capability Low reverse leakage current High surge current capability TO-220AB Unit : inch (mm) .177(4.5)MAX Automotive Inverters/Solar Inverters Plating Power Supply,SMPS and UPS Car Audio Amplifiers and Sound Device Systems .038(0.96) .019(0.50) Mechanical Data Case: Heatsink TO-220AB Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 Polarity: As marked on diode body Mounting position: Any Weight: 2.1 gram approxiamtely .50(12.7)MIN Application .1(2.54) .624(15.87) .054(1.39) .045(1.15) .548(13.93) .139(3.55) MIN .269(6.85) .196(5.00) .163(4.16) .226(5.75) .419(10.66) .387(9.85) .025(0.65)MAX .1(2.54) Case Case Case Negative Positive Common Cathode Common Anode Suffix "CT" Suffix "A" Doubler Tandem Polarity Suffix "D" Case Series Tandem Polarity Suffix "S" Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60HZ, resistive or inductive load. For capacitive load, derate current by 20%. Symbols FR1601CT FR1602CT FR1603CT FR1604CT FR1605CT FR1606CT FR1607CT Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current See Fig. 2 I(AV) 16.0 Amp IFSM 150 Amp VF 1.3 Volts Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 8.0A DC and 25℃ Maximum Reverse Current at TC=25℃ at Rated DC Blocking Voltage TC=125℃ 5.0 IR Typical Thermal Resistance (Note 1) RθJC Maximum Reverse Recovery Time (Note 2) TRR Operating and Storage Temperature Range TJ，Tstg uAmp 100 ℃/W 1.5 150 250 -55 to +150 500 nS ℃ NOTES: 1- Thermal Resistance from Junction to Case per Leg Mounted on Heatsink. 2- Reverse Recovery Test Conditions：IF=.5A，IR=1A，IRR=.25A. Rev.07C © 2006 Thinki Semiconductor Co., Ltd. Page 1/2 http://www.thinkisemi.com/ FR1601CT thru FR1607CT RATINGS AND CHARACTERISTIC CURVES Rev.07C © 2006 Thinki Semiconductor Co., Ltd. Page 2/2 http://www.thinkisemi.com/