HTRT Series Aluminum Electrolytic Capacitors (High Temperature, Axial) MERITEK RoHS FEATURES Axial lead type of standard series for general purpose Guaranteed long life 1,000hrs, 105C Expanded applications for automatic mounting Anti-solvent SPECIFICATIONS Item Characteristics Operating Temp Range -40ºC ~+105ºC (6.3V~400V), -25ºC ~+105ºC (450V) Rated Working Voltage 6.3V~450V Rated Capacitance Capacitance Tolerance Leakage Current Dissipation Factor ( tan ) 0.47uF~22000uF 20%(M) @120Hz 20C 6.3WV~100WV 160WV~450WV I=0.03CV, or 4 (uA), whichever is greater, after 1 CV≤1000: I=0.1CV+40(uA) or less after 1 minute minute application of rated voltage application of rated voltage I=0.01CV or 3 (uA), whichever is greater, after 2 CV>1000: I=0.04CV+100(uA) or less after 1 minutes application of rated voltage minute application of rated voltage Rated Voltage (V) 6.3 10 16 25 35 50 63 100 160~350 400~450 tan δ (MAX) 0.24 0.20 0.16 0.14 0.12 0.10 0.09 0.08 0.20 0.25 For capacitance of more than 1000uF, add 0.02 for every increase of 1000uF (120Hz: 20ºC) Low Temperature Stability Impedance Ratio (120Hz) Rated Voltage (V) Load Life 6.3 10 16 25 35 50~100 160~200 Z(-25ºC)/Z(20ºC) 4 3 2 2 2 2 Z(-40ºC)/Z(20ºC) 10 8 6 4 3 3 250 315~400 450 3 3 3 5 6 6 6 - After 1000 hours of application of rated voltage at 105ºC, capacitors meet the characteristics requirements mentioned below Capacitance Change 20% of initial value Dissipation Factor 200% or less of initial specified value Leakage Current initial specified value Shelf Life After leaving capacitors under no load at 105ºC, for 1000 hours and applying voltage according to JIS C-5102 4-3, they meet the specified value for load life characteristics listed above Applicable Standards Characteristics W of JIS C-5141 PART NUMBER SYSTEM HTRT 350V 220 M 1326 Meritek Series Rated Voltage Rated Capacitance Express in micro farad(uF), First two digits are significant figures, Third digit denotes number of zeros. ‘R’ denotes decimal point for values less than 10uF Tolerance M - 20% Package Code Blank Bulk Case size – (D) Diameter x (L) Length in mm (Optional) Rev. 7 Aluminum Electrolytic Capacitors HTRT Series (High Temperature, Axial) MERITEK RoHS RIPPLE CURRENT COEFFICIENTS DIMENSIONS (mm) W.V. Cap(uF) 50 Sleeve (P.V.C.) Safety vent (ϕ10up) α L+α, max. D d 6.3~100WV 160WV~ 35mm min. 5~12.5 0.6 Frequency (Hz) 35mm min. ϕd Tinned CP wire ϕD ≤18 D+0.5, max ϕD ≥22 D+1.0,max 16~18 0.8 CASE SIZE & MAX RIPPLE CURRENT V Cap. (uF) Item 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 22000 V Cap. (uF) Item 1.0 2.2 3.3 4.7 10 22 33 47 100 6.3 DxL R.C. 5x12.5 6.3x16 6.3x16 8x16 10x21 12.5x26 12.5x26 16x31 16x31 16x41 22x41 22x51 110 200 250 330 600 1020 1200 1630 1830 2290 2630 2830 160 DxL 6.3x12.5 6.3x16 8x16 8x16 8x20 10x26 12.5x26 12.5x31 16x41 10 DxL R.C. 5x12.5 5x12.5 6.3x12.5 6.3x16 8x16 8x16 10x21 12.5x26 12.5x31 16x31 16x41 16x41 22x41 22x51 R.C. 13 23 33 39 60 120 170 220 420 70 80 130 220 300 350 640 1090 1380 1720 2160 2390 2750 2940 200 DxL 6.3x12.5 6.3x16 8x16 8x16 10x21 12.5x26 12.5x26 12.5x31 16x41 120 1 1 1 1 300 1.35 1.23 1.10 1.25 1k 1.57 1.34 1.13 1.40 10k~ 2.00 1.50 1.15 1.60 ~ +70ºC 1.27 Case size Max. ripple current 16 DxL R.C. 5x12.5 5x12.5 5x12.5 6.3x12.5 8x16 8x16 8x20 10x26 12.5x31 16x31 16x41 18x41 22x41 22x51 25x61 R.C. 13 23 33 45 70 140 190 250 420 6.3~100 160~450 100~470 1000~22000 1~100 0.80 0.85 0.80 Temperature Multiplier 22~25 0.8 2.0 - 1.0 2.0 ~47 0.75 25 DxL R.C. 35 DxL R.C. 5x12.5 40 5x12.5 45 60 5x12.5 65 5x12.5 70 75 5x12.5 80 6.3x12.5 95 90 6.3x12.5 105 6.3x16 125 145 6.3x16 170 8x16 200 260 8x16 280 8x20 340 320 8x20 380 10x21 460 430 10x26 560 10x26 610 770 12.5x26 900 12.5x31 1050 1280 16x31 1470 16x31 1570 1610 16x41 1910 16x41 2020 2060 18x41 2170 22x41 2460 2290 22x41 2560 22x51 2700 2680 22x51 2800 25x61 3400 2890 25x61 3480 3570 250 DxL 6.3x16 8x16 8x16 8x20 10x21 12.5x26 12.5x31 16x31 16x41 R.C. 15 27 33 45 70 140 190 250 420 315 DxL 6.3x16 8x16 8x20 8x20 10x26 12.5x31 16x31 16x31 R.C. 15 27 37 45 80 150 210 250 50 DxL 5x12.5 5x12.5 5x12.5 5x12.5 5x12.5 5x12.5 6.3x12.5 6.3x16 6.3x16 8x16 10x21 10x26 13x26 16x31 18x41 22x41 22x51 25x61 350 DxL 6.3x16 8x16 8x20 10x21 12.5x26 12.5x31 16x31 16x41 +105ºC 1.0 : DxL : mA(rms) (mm) 105C 120Hz 63 100 R.C. DxL R.C. DxL R.C. 5 5x12.5 10 10 5x12.5 21 23 5x12.5 27 30 5x12.5 35 36 5x12.5 38 5x12.5 40 50 5x12.5 55 6.3x12.5 65 85 6.3x12.5 90 8x16 115 115 6.3x16 125 8x16 145 140 8x16 160 8x20 190 220 8x20 260 10x26 340 410 10x26 480 12.5x26 560 560 12.5x26 640 12.5x31 740 730 12.5x31 830 16x31 960 1250 16x31 1320 22x41 1700 1920 22x41 2150 25x51 2590 2340 22x51 2450 2630 25x61 3180 3310 R.C. 15 27 37 50 90 150 210 290 400 DxL 8x16 8x20 10x21 10x21 12.5x26 16x31 16x41 18x41 R.C. 16 27 38 45 85 150 220 280 450 DxL 8x16 10x21 10x21 10x26 12.5x26 16x31 18x41 R.C. 16 31 38 50 85 150 230 Rev. 7