MY84 / MY84C Double-Balanced Mixer Rev. V3 Features • • • • • Product Image LO 1.8 to 10 GHz RF 1.8 to 10 GHz IF DC to 1000 MHz LO Drive +9 dBm (nominal) Low Noise Figure Description The MY84 is a double balanced mixer, designed for use in military, commercial and test equipment applications. The design utilizes Schottky ring quad diodes and broadband soft dielectric baluns to attain excellent performance. This mixer can also be used as a phase detector and/or bi-phase modulator since the IF port is DC coupled to the diodes. The use of high temperature solder and welded assembly processes used internally makes it ideal for use in manual, semi-automated assembly. Environmental screening available to MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory. Ordering Information Part Number Package MY84 Versapac MY84C SMA Connectorized Electrical Specifications: Z0 = 50Ω Lo = +9 dBm (Downconverter application only) Typical Parameter Test Conditions Guaranteed Units +25ºC -54º to +85ºC SSB Conversion Loss (max) fR = 1.8 to 5.5 GHz, fL = 1.8 to 6 GHz, fI = 0.03 to 0.5 GHz fR = 5.5 to 10 GHz, fL = 5 to 10 GHz, fI = 0.03 to 1 GHz dB 6.0 6.5 7.5 8.5 8.0 9.0 SSB Noise Figure (max) Within 1 dB of conversion loss dB ____ ____ ____ Isolation, L to R (min) fL = 1.8 to 6 GHz fL = 6 to 10 GHz dB 45 32 30 20 28 18 Isolation, L to I (min) fL = 1.8 to 10 GHz dB 30 18 16 1 dB Conversion Comp. fL = +9 dBm dBm +4 Input IP3 fR1 = 5 GHz at –10 dBm, fR2 = 5.01 GHz at –10 dBm, fL = 5.5 GHz at +9 dBm dBm +11 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MY84 / MY84C Double-Balanced Mixer Rev. V3 Typical Performance Curves 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MY84 / MY84C Double-Balanced Mixer Rev. V3 Outline Drawing: Versapac * Absolute Maximum Ratings Parameter Absolute Maximum Operating Temperature -54ºC to +100ºC Storage Temperature -65ºC to +100ºC Peak Input Power +23 dBm max @ +25ºC +20 dBm max @ +100ºC Peak Input Current 100 mA DC Weight: 6 grams (0.21 oz.) max Outline Drawing: SMA Connectorized * Weight: 12 grams (0.42 oz.) max ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.