EGL41A - EGL41G SURFACE MOUNT GLASS PASSIVATED ULTRAFAST RECTIFIER DIODES VOLTAGE RANGE: 50 - 400V CURRENT: 1.0 A Features ! ! ! ! ! ! High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Super fast recovery time A B C Mechanical Data ! ! Case: DO-213AB/LL41 Terminals: Plated terminals, solderable per LL41//DO-213AB MIL-STD-750, Method 2026 ! ! Mounting Position: Any Weight: 0.116 ounce, 0.0046 gram Dim Min Max A 4.80 5.20 B 2.40 2.60 0.55 Nominal C All Dimensions in mm Maximum Ratings TA = 25C unless otherwise specified Symbol Characteristic EGL41A EGL41B EGL41C EGL41D EGL41F EGL41G Unit Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 Volts Maximum RMS voltage VRMS 35 70 105 140 210 280 Volts Maximum DC blocking voltage VDC 50 100 150 200 300 400 Volts Maximum average forward rectified current at TT=75°C I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30.0 Amps VF 1.0 IR 5.0 50.0 µA Maximum reverse recovery time (NOTE 1) trr 50.0 ns Typical junction capacitance (NOTE 2) CJ 20.0 Maximum thermal resistance (NOTE 3) RΘJA RΘJT 60.0 30.0 TJ, TSTG -65 to +175 Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=125°C (NOTE 4) Operating junction and storage temperature range 1.25 14.0 Volts pF °C/W °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal (4) Thermal resistance from junction to terminal, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal 1 of 2 www.sunmate.tw PEAK FORWARD SURGE CURRENT, AMPERES 1.0 RESISTIVE OR INDUCTIVE LOAD 0.5 0 0 25 50 75 100 125 150 175 30 TJ=TJ max. 8.3ms SINGLE HALF SINE WAVE (JEDEC Method) 25 20 15 10 5.0 0 1 TERMINAL TEMPERATURE, °C 100 10 NUMBER OF CYCLES AT 60 HZ FIG. 3 -TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 50 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD FORWARD CURRENT, AMPERES 1,000 PULSE WIDTH=300µs 1% DUTY CYCLE 10 TJ=150°C TJ=25°C 1 0.1 100 TJ=150°C 10 TJ=100°C 1 0.1 TJ=25°C 0 0 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % EGL41A - EGL41D EGL41F - EGL41G 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, °CW 100 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 70 JUNCTION CAPACITANCE, pF AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE TJ=25°C f=1.0 MHZ Vsig=50mVp-p 60 50 40 30 20 10 0 0.1 EGL41A - EGL41D EGL41F - EGL41G 1 10 10 1 0.1 0.01 100 REVERSE VOLTAGE, VOLTS 0.1 1 10 100 t, PULSE DURATION, sec. 2 of 2 www.sunmate.tw