Agilent HSMx-A10x-xxxxx PLCC-2 Surface Mount LED Indicator Data Sheet Features • Industry standard PLCC-2 package • High reliability LED package • High brightness using AlInGaP and InGaN dice technologies Description This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. To facilitate easy pick & place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin, except red color, to provide close uniformity. • Available in full selection of colors These LEDs are compatible with IR solder reflow process. Due to the high reliability feature of these products, they can also be mounted using through-the-wave soldering process. • Super wide viewing angle at 120˚ The super wide viewing angle at 120˚ makes these LEDs ideally suited for panel, push button, or general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. With the built-in reflector pushing up the intensity of the light output, these LEDs are also suitable to be used as LED pixels in interior electronic signs. Applications • Available in 8 mm carrier tape on 7 inch reel (2000 pieces) • Compatible with both IR and TTW soldering process • Interior automotive –Instrument panel backlighting –Central console backlighting –Cabin backlighting • Electronic signs and signals –Interior full color sign –Variable message sign • Office automation, home appliances, industrial equipment –Front panel backlighting –Push button backlighting –Display backlighting CAUTION: HSMN,M,K and E-A10x-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details. Package Dimensions 2.8 ± 0.2 2.2 ± 0.2 3.2 ± 0.2 1.9 ± 0.2 0.1 TYP. 0.8 ± 0.1 3.5 ± 0.2 0.8 ± 0.3 0.5 ± 0.1 CATHODE MARKING (ANODE MARKING FOR AlGaAs DEVICES) TOP MOUNT 2.8 ± 0.2 2.2 ± 0.2 1.9 ± 0.2 5.2 ± 0.2 3.2 ± 0.2 0.1 TYP. CATHODE MARKING REVERSE MOUNT NOTE: ALL DIMENSIONS IN MILLIMETERS. 2 0.5 ± 0.1 Device Selection Guide Red Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMS-A100-J00J1 4.0 15.0 - 20 GaP HSMS-A100-L00J1 10.0 15.0 - 20 GaP HSMS-A100-H70J2 3.0 - 8.0 10 GaP HSMS-A100-J80J2 5.0 - 15.5 10 GaP HSMH-A100-L00J1 10.0 15.0 - 20 AlGaAs HSMH-A100-N00J1 25.0 50.0 - 20 AlGaAs HSMH-A100-L70J2 12.5 - 32.0 10 AlGaAs HSMH-A100-M80J2 20.0 - 62.0 10 AlGaAs HSMH-A100-P30J1 40.0 - 100.0 20 AlGaAs HSMC-A100-J00J1 4.0 100.0 - 20 AlInGaP HSMC-A100-Q00J1 63.0 100.0 - 20 AlInGaP HSMC-A100-R00J1 100.0 140.0 - 20 AlInGaP HSMC-A101-S00J1 160.0 220.0 - 20 AlInGaP HSMZ-A100-T00J1 250.0 350.0 - 20 AlInGaP HSMC-A100-P30J1 40.0 - 100.0 20 AlInGaP HSMC-A100-Q40J1 63.0 - 200.0 20 AlInGaP HSMC-A101-R80J1 125.0 - 395.0 20 AlInGaP HSMZ-A100-S80J1 200.0 - 620.0 20 AlInGaP Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMJ-A100-Q00J1 63.0 100.0 - 20 AlInGaP HSMJ-A101-S00J1 160.0 200.0 - 20 AlInGaP HSMV-A100-T00J1 250.0 350.0 - 20 AlInGaP HSMJ-A100-Q30J1 63.0 - 155.0 20 AlInGaP HSMJ-A100-R40J1 100.0 - 315.0 20 AlInGaP HSMJ-A101-R80J1 125.0 - 395.0 20 AlInGaP HSMV-A100-S80J1 200.0 - 620.0 20 AlInGaP Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMD-A100-J00J1 4.0 15.0 - 20 GaP HSMD-A100-L00J1 10.0 15.0 - 20 GaP HSMD-A100-J7PJ2 5.0 - 12.5 10 GaP HSMD-A100-K4PJ2 6.3 - 20.0 10 GaP HSML-A100-Q00J1 63.0 100.0 - 20 AlInGaP HSML-A101-S00J1 160.0 220.0 - 20 AlInGaP HSML-A100-Q7PJ1 80.0 - 200.0 20 AlInGaP HSML-A100-R7PJ1 125.0 - 315.0 20 AlInGaP HSML-A101-R8WJ1 125.0 - 395.0 20 AlInGaP Red Orange Orange 3 Device Selection Guide, continued Yellow/Amber Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMY-A100-J00J1 4.0 12.0 - 20 GaP HSMY-A100-L00J1 10.0 12.0 - 20 GaP HSMY-A100-J35J2 4.0 - 10.0 10 GaP HSMY-A100-K45J2 6.3 - 20.0 10 GaP HSMA-A100-Q00J1 63.0 100.0 - 20 AlInGaP HSMA-A101-S00J1 160.0 220.0 - 20 AlInGaP HSMU-A100-S00J1 160.0 320.0 - 20 AlInGaP HSMA-A100-Q35J1 63.0 - 155.0 20 AlInGaP HSMA-A100-R45J1 100.0 - 315.0 20 AlInGaP HSMA-A101-R8WJ1 125.0 - 395.0 20 AlInGaP HSMU-A100-S4WJ1 160.0 - 500.0 20 AlInGaP Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMG-A100-J02J1 4.0 18.0 - 20 GaP HSMG-A100-K72J2 8.0 - 20.0 10 GaP HSME-A100-M02J1 16.0 70.0 - 20 AlInGaP HSME-A100-N82J1 30.0 - 100.0 20 AlInGaP Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMG-A100-H01J1 2.5 8.0 - 20 GaP HSMG-A100-G31J2 1.6 - 4.0 10 GaP HSMG-A100-H41J2 2.5 - 8.0 10 GaP HSME-A100-L01J1 10.0 40.0 - 20 AlInGaP HSME-A100-M3PJ1 16.0 - 40.0 20 AlInGaP Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMM-A101-R00J1 100.0 200.0 - 20 InGaN HSMM-A100-S00J1 160.0 350.0 - 20 InGaN HSMM-A101-Q7PJ1 80.0 - 200.0 20 InGaN HSMM-A101-R7PJ1 125.0 - 315.0 20 InGaN HSMM-A101-R8PJ1 125.0 - 395.0 20 InGaN HSMM-A100-S8PJ1 200.0 - 620.0 20 InGaN Yellow Green Emerald Green Green 4 Device Selection Guide, continued Cyan Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMK-A101-R00J1 100.0 170.0 - 20 InGaN HSMK-A100-S00J1 160.0 280.0 - 20 InGaN HSMK-A100-S8WJ1 200.0 - 620.0 20 InGaN HSMK-A101-Q3WJ1 63.0 - 155.0 20 InGaN HSMK-A101-R4WJ1 100.0 - 315.0 20 InGaN Part Number Min. Iv (mcd) Typ. Iv (mcd) Max. Iv (mcd) Test Current (mA) Dice Technology HSMB-A100-J00J1 4.0 15.0 - 20 GaN HSMB-A100-J70J2 5.0 - 12.5 10 GaN HSMB-A100-K80J2 8.0 - 25.0 10 GaN HSMN-A101-N00J1 25.0 50.0 - 20 InGaN HSMN-A100-P00J1 40.0 70.0 - 20 InGaN HSMN-A101-N7YJ1 30.0 - 80.0 20 InGaN HSMN-A101-N8YJ1 30.0 - 100.0 20 InGaN HSMN-A100-P8YJ1 50.0 - 155.0 20 InGaN Blue Note: 1. The luminous intensity, I v, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 5 Part Numbering System HSM x 1 - A x2 x 3 x 4 - x 5x 6 x 7 x 8x 9 Packaging Option Color Bin Selection Intensity Bin Select Device Specific Configuration Package Type LED Chip Color Absolute Maximum Ratings (TA = 25°C) Parameters HSMS/D/Y/G DC Forward Current[1] 30 mA [2] Peak Forward Current 100 mA Power Dissipation 63 mW Reverse Voltage Junction Temperature Operating Temperature Storage Temperature HSMH 30 mA 100 mA 60 mW HSMC/J/L/A HSME 30 mA[3,4] 20 mA[3,4] 100 mA 100 mA 63 mW 48 mW 5V 110°C –55°C to +100°C –55°C to +100°C Notes: 1. Derate linearly as shown in Figure 4. 2. Duty factor = 10%, Frequency = 1 kHz. 3. Drive current between 10 mA and 30 mA is recommended for best long term performance. 4. Operation at current below 5 mA is not recommended. 6 HSMZ/V/U 30 mA[3,4] 100 mA 72 mW HSMM/K/B/N 30 mA 100 mA 114 mW Optical Characteristics (TA = 25˚C) Color Red Part Number HSMS-A100 HSMH-A100 HSMC-A10x HSMZ-A100 Red Orange HSMJ-A10x HSMV-A100 Orange HSMD-A100 HSML-A10x Amber HSMY-A100 HSMA-A10x HSMU-A100 Yellow Green HSMG-A100 HSME-A100 Emerald Green HSMG-A100 HSME-A100 Green HSMM-A10x Cyan HSMK-A10x Blue HSMB-A100 HSMN-A10x Dice Technology GaP AlGaAs AlInGaP AlInGaP AlInGaP AlInGaP GaP AlInGaP GaP AlInGaP AlInGaP GaP AlInGaP GaP AlInGaP InGaN InGaN GaN InGaN Peak Wavelength λPEAK (nm) Typ. 635 645 635 639 621 623 600 609 583 592 594 565 575 558 566 523 502 428 468 Dominant Wavelength[1] λD (nm) Typ. 626 637 626 630 615 617 602 605 585 590 592 569 570 560 560 525 505 462 470 Viewing Angle 2 θ1/2[2] (Degrees) Typ. 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 Luminous Efficacy ηv[3] (lm/W) Typ. 120 63 150 155 240 263 380 320 520 480 500 590 560 650 610 500 300 65 75 Luminous Intensity/ Total Flux Iv(mcd)/Φv(mlm) Typ. 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 Notes: 1. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. θ 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, I e in watts/steradian, may be calculated from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. Electrical Characteristics (TA = 25˚C) Part Number HSMS/D/Y/G HSMH HSMC/J/L/A/E HSMZ/V/U HSMB HSMM/K/N 7 Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 2.2 2.6 1.9 2.6 1.9 2.4 2.2 2.6 3.9 4.3 3.4 4.05 Reverse Voltage VR @ 100 µA Min. 5 5 5 5 — — Reverse Voltage VR @ 10 µA Min. — — — — 5 5 Thermal Resistance RθJP (°C/W) 180 180 280 280 280 280 1.0 RELATIVE INTENSITY 0.9 BLUE EMERALD GREEN CYAN YELLOW GREEN 0.8 GREEN 0.7 AMBER 0.6 0.5 ORANGE 0.4 RED ORANGE 0.3 RED 0.2 0.1 0 380 430 530 480 580 630 680 730 780 WAVELENGTH – nm 35 GaP EMERALD GREEN 0.8 GaP YELLOW GREEN 0.6 FORWARD CURRENT – mA RELATIVE INTENSITY 1.0 GaP YELLOW GaP ORANGE GaN BLUE 0.4 GaP RED 0.2 0 30 20 HSMH 15 530 480 580 630 680 730 HSMC/J/L/A/E HSMM/K/N 10 HSMB 5 0 430 380 HSMS/D/Y/G HSMZ/V/U 25 780 0 1 Figure 1. Relative intensity vs. wavelength. 35 GaN 1.0 0.8 0.6 HSMS/D/G/ Y/U/V/Z 25 HSMH HSMC/J/L/A/E 20 HSMM/K/B/N 15 10 0.4 5 0.2 0 0 5 10 15 20 25 30 DC FORWARD CURRENT – mA Figure 3. Relative intensity vs. forward current. 8 DOMINANT WAVELENGTH – nm InGaN 1.2 4 5 540 30 CURRENT – mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) Gap AlInGaP AlGaAs 1.4 3 Figure 2. Forward current vs. forward voltage. 1.8 1.6 2 FORWARD VOLTAGE – V WAVELENGTH – nm 35 0 0 20 40 60 80 100 TEMPERATURE – °C Figure 4. Maximum forward current vs. ambient temperature. Derated based on T JMAX = 110˚C, Rθ JA = 500˚C/W. 120 530 GREEN 520 510 CYAN 500 490 480 BLUE 470 460 0 5 10 15 20 25 30 35 CURRENT – mA Figure 5. Dominant wavelength vs. forward current – InGaN devices. 1.0 0.4 NORMALIZED INTENSITY DELTA VF (NORMALIZED AT 25°C) 0.5 0.3 0.2 0.1 GaP/AlGaAs/ AlInGaP 0 -0.1 0.8 0.6 0.4 0.2 -0.2 -0.3 -100 InGaN/GaN -50 50 0 100 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 150 0 10 20 30 40 50 60 70 80 90 ANGULAR DISPLACEMENT – DEGREES TEMPERATURE – °C Figure 6. Forward voltage shift vs. temperature. Figure 7. Radiation Pattern. 10 to 20 SEC. 217 °C 240°C MAX. 3°C/SEC. MAX. 100-150°C TEMPERATURE TEMPERATURE 20 SEC. MAX. 183°C –6°C/SEC. MAX. 3°C/SEC. MAX. 255 °C +5 °C -0 °C 3 °C/SEC. MAX. 125 °C ± 25 °C 6 °C/SEC. MAX. MAX. 120 SEC. 60 to 150 SEC. 120 SEC. MAX. 60-150 SEC. TIME TIME * THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX. Figure 8a. Recommended SnPb reflow soldering profile. Figure 8b. Recommended Pb-free reflow soldering profile. 4.50 1.50 LAMINAR WAVE HOT AIR KNIFE TURBULENT WAVE TEMPERATURE – °C 250 2.60 200 150 FLUXING 100 ;; ;; ;; ;;; ;; BOTTOM SIDE OF PC BOARD 50 30 TOP SIDE OF PC BOARD PREHEAT 0 10 20 30 40 50 60 70 80 90 TIME – SECONDS CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN) PREHEAT SETTING = 150°C (100°C PCB) SOLDER WAVE TEMPERATURE = 245°C AIR KNIFE AIR TEMPERATURE = 390°C AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.) AIR KNIFE ANGLE = 40° SOLDER: SN63; FLUX: RMA NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY COOLED BEFORE EXERTING MECHANICAL FORCE. 100 SOLDER RESIST Figure 9. Recommended wave soldering profile. Figure 10. Recommended soldering pad pattern. 9 TRAILER COMPONENT LEADER 480 mm MIN. FOR ∅180 REEL. 960 mm MIN. FOR ∅330 REEL. 200 mm MIN. FOR ∅180 REEL. 200 mm MIN. FOR ∅330 REEL. C A USER FEED DIRECTION Figure 11. Tape leader and trailer dimensions. 4 ± 0.1 4 ± 0.1 2 ± 0.05 2.29 ± 0.1 1.75 ± 0.1 +0.1 ∅1.5 –0 C 3.5 ± 0.05 +0.3 8 –0.1 3.81 ± 0.1 A 3.05 ± 0.1 +0.1 ∅1 –0 8° 0.229 ± 0.01 Figure 12. Tape dimensions. 10 2 +0.5 –0 Ø 20.5 ± 0.3 62.5 180 +0 –2.5 Ø 13 ± 0.2 8.4 +1.50 (MEASURED AT OUTER EDGE) –0.00 14.4 (MAX. MEASURED AT HUB) LABEL AREA (111 mm x 57 mm) WITH DEPRESSION (0.25 mm) 7.9 (MIN.) 10.9 (MAX.) Figure 13. Reel dimensions. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 14. Reeling orientation. 11 Baking is required under the following conditions: a) the humidity indicator turns pink b) the pack has been opened for more than four weeks. Baking recommended condition: 60 ± 5˚C for 20 hours. This product is qualified as Moisture Sensitive JEDEC Level 2A. Intensity Bin Select (X5X6) Individual reel will contain parts from one half bin only. Color Bin Select (X 7) Individual reel will contain parts from one full bin only. X5 X7 0 Z Y W V U T S Q P N M L K 1 2 3 4 5 6 X6 0 3 4 5 7 8 9 Min Iv Bin Full Distribution 3 half bins starting from X51 4 half bins starting from X51 5 half bins starting from X51 3 half bins starting from X52 4 half bins starting from X52 5 half bins starting from X52 Intensity Bin Limits Bin ID G1 G2 H1 H2 J1 J2 K1 K2 L1 L2 M1 M2 N1 N2 P1 P2 Q1 Q2 R1 R2 S1 S2 T1 T2 U1 U2 V1 V2 Min. (mcd) 1.80 2.24 2.80 3.55 4.50 5.60 7.20 9.00 11.20 14.00 18.00 22.40 28.50 35.50 45.00 56.00 71.50 90.00 112.50 140.00 180.00 224.00 285.00 355.00 450.00 560.00 715.00 900.00 Max. (mcd) 2.24 2.80 3.55 4.50 5.60 7.20 9.00 11.20 14.00 18.00 22.40 28.50 35.50 45.00 56.00 71.50 90.00 112.50 140.00 180.00 224.00 285.00 355.00 450.00 560.00 715.00 900.00 1125.00 Tolerance of each bin limit = ± 12%. 12 Full Distribution A and B only B and C only C and D only D and E only E and F only F and G only G and H only A, B, and C only B, C, and D only C, D, and E only D, E, and F only E, F, and G only F, G, and H only A, B, C, and D only E, F, G, and H only B, C, D, and E only C, D, E, and F only A, B, C, D, and E only B, C, D, E, and F only Color Bin Limits Blue A B C D Cyan A B C D Min. (nm) 460.0 465.0 470.0 475.0 Min. (nm) 490.0 495.0 500.0 505.0 Max. (nm) 465.0 470.0 475.0 480.0 Max. (nm) 495.0 500.0 505.0 510.0 Color Bin Limits Emerald Green A B C D Min. (nm) 552.5 555.5 558.5 561.5 Max. (nm) 555.5 558.5 561.5 564.5 Yellow Green E F G H Min. (nm) 564.5 567.5 570.5 573.5 Max. (nm) 567.5 570.5 573.5 576.5 Amber A B C D E F Min. (nm) 582.0 584.5 587.0 589.5 592.0 594.5 Max. (nm) 584.5 587.0 589.5 592.0 594.5 597.0 Orange A B C D E Min. (nm) 597.0 600.0 603.0 606.0 609.0 Max. (nm) 600.0 603.0 606.0 609.0 612.0 Red Orange Min. (nm) A 611.0 B 616.0 Max. (nm) 616.0 620.0 Red Min. (nm) Full Distribution Max. (nm) Tolerance of each bin limit = ± 1 nm. Green A B C D Min. (nm) 515.0 520.0 525.0 530.0 Max. (nm) 520.0 525.0 530.0 535.0 Packaging Option (X8X9) Option Test Current Package Type Reel Size J1 20 mA Top Mount 7 inch J4 20 mA Top Mount 13 inch H1 20 mA Reverse Mount 7 inch H4 20 mA Reverse Mount 13 inch J2 10 mA Top Mount 7 inch J5 10 mA Top Mount 13 inch H2 10 mA Reverse Mount 7 inch H5 10 mA Reverse Mount 13 inch www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2004-2005 Agilent Technologies, Inc. Obsoletes 5989-1207EN May 15, 2005 5989-3100EN