CD4013BM/CD4013BC Dual D Flip-Flop General Description Features The CD4013B dual D flip-flop is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement mode transistors. Each flip-flop has independent data, set, reset, and clock inputs and ‘‘Q’’ and ‘‘Q’’ outputs. These devices can be used for shift register applications, and by connecting ‘‘Q’’ output to the data input, for counter and toggle applications. The logic level present at the ‘‘D’’ input is transferred to the Q output during the positive-going transition of the clock pulse. Setting or resetting is independent of the clock and is accomplished by a high level on the set or reset line respectively. Y Y Y Wide supply voltage range High noise immunity Low power TTL compatibility 3.0V to 15V 0.45 VDD (typ.) fan out of 2 driving 74L or 1 driving 74LS Applications Y Y Y Y Automotive Data terminals Instrumentation Medical electronics Y Y Y Y Alarm system Industrial electronics Remote metering Computers Connection Diagram Dual-In-Line Package Order Number CD4013B TL/F/5946 – 1 Top View Truth Table CL ² D R S Q Q L L K x x x 0 1 x x x x 0 0 0 1 0 1 0 0 0 0 1 1 0 1 Q 0 1 1 1 0 Q 1 0 1 No change ² e Level change x e Don’t care case C1995 National Semiconductor Corporation TL/F/5946 RRD-B30M105/Printed in U. S. A. CD4013BM/CD4013BC Dual D Flip-Flop February 1988 Absolute Maximum Ratings (Notes 1 & 2) Recommended Operating Conditions (Note 2) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. DC Supply Voltage (VDD) Input Voltage (VIN) Storage Temp. Range (TS) Power Dissipation (PD) Dual-In-Line Small Outline Lead Temperature (TL) (Soldering, 10 seconds) DC Supply Voltage (VDD) Input Voltage (VIN) Operating Temperature Range (TA) CD4013BM CD4013BC b 0.5 VDC to a 18 VDC b 0.5 VDC to VDD a 0.5 VDC b 65§ C to a 150§ C a 3 VDC to a 15 VDC 0 VDC to VDD VDC b 55§ C to a 125§ C b 40§ C to a 85§ C 700 mW 500 mW 260§ C DC Electrical Characteristics CD4013BM (Note 2) Symbol Parameter b 55§ C Conditions Min a 25§ C Max Min Typ a 125§ C Max Min Units Max IDD Quiescent Device Current VDD e 5V, VIN e VDD or VSS VDD e 10V, VIN e VDD or VSS VDD e 15V, VIN e VDD or VSS 1.0 2.0 4.0 1.0 2.0 4.0 30 60 120 mA mA mA VOL Low Level Output Voltage lIOl k 1.0 mA VDD e 5V VDD e 10V VDD e 15V 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 V V V High Level Output Voltage lIOl k 1.0 mA VDD e 5V VDD e 10V VDD e 15V Low Level Input Voltage lIOl k 1.0 mA VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V, VO e 1.5V or 13.5V High Level Input Voltage lIOl k 1.0 mA VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V, VO e 1.5V or 13.5V 3.5 7.0 11.0 3.5 7.0 11.0 IOL Low Level Output Current (Note 3) VDD e 5V, VO e 0.4V VDD e 10V, VO e 0.5V VDD e 15V, VO e 1.5V 0.64 1.6 4.2 0.51 1.3 3.4 IOH High Level Output Current (Note 3) VDD e 5V, VO e 4.6V VDD e 10V, VO e 9.5V VDD e 15V, VO e 13.5V b 0.64 b 1.6 b 4.2 b 0.51 b 1.3 b 3.4 IIN Input Current VDD e 15V, VIN e 0V VDD e 15V, VIN e 15V VOH VIL VIH 4.95 9.95 14.95 4.95 9.95 14.95 4.95 9.95 14.95 1.5 3.0 4.0 V V V 1.5 3.0 4.0 1.5 3.0 4.0 V V V 3.5 7.0 11.0 V V V 0.88 2.25 8.8 0.36 0.9 2.4 mA mA mA b 0.88 b 2.25 b 8.8 b 0.36 b 0.9 b 2.4 mA mA mA b 0.1 b 10 b 5 b 0.1 b 1.0 0.1 10b5 0.1 1.0 mA mA DC Electrical Characteristics CD4013BC (Note 2) Symbol Parameter b 40§ C Conditions Min Max a 25§ C Min Typ a 85§ C Max Min Units Max IDD Quiescent Device Current VDD e 5V, VIN e VDD or VSS VDD e 10V, VIN e VDD or VSS VDD e 15V, VIN e VDD or VSS 4.0 8.0 16.0 4.0 8.0 16.0 30 60 120 mA mA mA VOL Low Level Output Voltage lIOl k 1.0 mA VDD e 5V VDD e 10V VDD e 15V 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 V V V High Level Output Voltage lIOl k 1.0 mA VDD e 5V VDD e 10V VDD e 15V Low Level Input Voltage lIOl k 1.0 mA VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V, VO e 1.5V or 13.5V VOH VIL 4.95 9.95 14.95 2 4.95 9.95 14.95 1.5 3.0 4.0 4.95 9.95 14.95 1.5 3.0 4.0 V V V 1.5 3.0 4.0 V V V DC Electrical Characteristics CD4013BC (Note 2) (Continued) Symbol Parameter b 40§ C Conditions Min Max a 25§ C Min High Level Input Voltage lIOl k 1.0 mA VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V, VO e 1.5V or 13.5V 3.5 7.0 11.0 3.5 7.0 11.0 IOL Low Level Output Current (Note 3) VDD e 5V, VO e 0.4V VDD e 10V, VO e 0.5V VDD e 15V, VO e 1.5V 0.52 1.3 3.6 0.44 1.1 3.0 IOH High Level Output Current (Note 3) VDD e 5V, VO e 4.6V VDD e 10V, VO e 9.5V VDD e 15V, VO e 13.5V b 0.52 b 1.3 b 3.6 b 0.44 b 1.1 b 3.0 IIN Input Current VDD e 15V, VIN e 0V VDD e 15V, VIN e 15V VIH Typ a 85§ C Max Min Units Max 3.5 7.0 11.0 V V V 0.88 2.25 8.8 0.36 0.9 2.4 mA mA mA b 0.88 b 2.25 b 8.8 b 0.36 b 0.9 b 2.4 mA mA mA b 0.3 b 10 b 5 b 0.3 b 1.0 0.3 10b5 0.3 1.0 mA mA Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed, they are not meant to imply that the devices should be operated at these limits. The tables of ‘‘Recommended Operating Conditions’’ and ‘‘Electrical Characteristics’’ provide conditions for actual device operation. Note 2: VSS e 0V unless otherwise specified. Note 3: IOH and IOL are measured one output at a time. AC Electrical Characteristics* TA e 25§ C, CL e 50 pF, RL e 200k, unless otherwise noted Symbol Parameter Conditions Min Typ Max Units CLOCK OPERATION tPHL, tPLH Propagation Delay Time VDD e 5V VDD e 10V VDD e 15V 200 80 65 350 160 120 ns ns ns tTHL, tTLH Transition Time VDD e 5V VDD e 10V VDD e 15V 100 50 40 200 100 80 ns ns ns tWL, tWH Minimum Clock Pulse Width VDD e 5V VDD e 10V VDD e 15V 100 40 32 200 80 65 ns ns ns tRCL, tFCL Maximum Clock Rise and Fall Time VDD e 5V VDD e 10V VDD e 15V 15 10 5 ms ms ms tSU Minimum Set-Up Time VDD e 5V VDD e 10V VDD e 15V 40 30 25 ns ns ns fCL Maximum Clock Frequency VDD e 5V VDD e 10V VDD e 15V 20 15 12 2.5 6.2 7.6 5 12.5 15.5 MHz MHz MHz SET AND RESET OPERATION tPHL(R), tPLH(S) Propagation Delay Time VDD e 5V VDD e 10V VDD e 15V 150 65 45 300 130 90 ns ns ns tWH(R), tWH(S) Minimum Set and Reset Pulse Width VDD e 5V VDD e 10V VDD e 15V 90 40 25 180 80 50 ns ns ns CIN Average Input Capacitance Any Input 5 7.5 pF *AC Parameters are guaranteed by DC correlated testing. 3 Schematic Diagram TL/F/5946 – 3 TL/F/5946 – 2 TL/F/5946–4 4 Logic Diagram TL/F/5946 – 5 Switching Time Waveforms TL/F/5946 – 6 5 CD4013BM/CD4013BC Dual D Flip-Flop Physical Dimensions inches (millimeters) Ceramic Dual-In-Line Package (J) Order Number CD4013BMJ or CD4013BCJ NS Package Number J14A Molded Dual-In-Line Package (N) Order Number CD4013BMN or CD4013BCN NS Package Number N14A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.