Imaging D A T A S H E E T Lighting Telecom 1100 Series - High Stability Flashlamps 1100 Series FX-1160 High Output, Short Arc Xenon Flashlamp with Internal Reflector Features Description The FX-1160 Reflector Lamp has greater than 40% more usable light intensity than our standard FX-1150 and is completely interchangeable. PerkinElmer customers have the option of either taking advantage of the greatly increased light output or they can operate the FX-1160 at a reduced input energy. Lower energy operation equates to increased lamp life and stability. The hemispherical reflector internal to the FX-1160 should not be confused with competitive types employing paraboloids or ellipsoids in which all of the forward direct light is nonrecoverable and becomes a serious source of optical scattering. PerkinElmer’s FX-1160 has an electrode orientation which does not block the forward light emission and therefore does not cause a “black hole” in the output beam profile. The optical design of the FX-1160 is ideal for use with lenses and fiber bundles, and provides the additional advantage of reduced optical noise by preventing back-plane scattering caused by the pin base. Applications that will benefit from this new PerkinElmer product introduction include: Absorption Spectroscopy, Fluorimetry, HPLC and Machine Vision. • Greater than 40% more usable light intensity than FX-1150 • Ideal for use with Optical Lenses and Fiber Bundles • Low optical “noise” • Continuous spectrum UV-VIS-IR • Long life • Low heat radiation • Microsecond flash duration • High efficiency output in the blue • Interchangeable with FX-1150 . www.perkinelmer.com/opto FX-1160, High Output Short Arc Xenon Flashlamp with Internal Reflector Arc Length (mm) Spectral Distribution (nm) Window Material FX 1160 FX 1161 FX 1162 1.5 225 – 1100+ 190 – 1100+ 120 – 1100+ Borosilicate UV VUV FX 1163 FX 1164 FX 1165 3.0 225 – 1100+ 190 – 1100+ 120 – 1100+ Borosilicate UV VUV Type Energy per Flash (joules) Average Power (watts) 0.5 MAX. 0.5 MAX. Life (flashes) Total Light Output Stability Spatial Movement Lite-Pac Type 300 MAX. >1 X 109 <1% * variation <0.1 mm FYD 1150 300 MAX. >1 X 109 <1% * variation <0.1 mm Voltage (Vdc) Flash Rate (Hz) 20 MAX. 350 – 1000 20 MAX. 350 – 1000 Optical Profile of FX-1160 FYD 1150 Normalized Intensity Output Beam Profile WINDOW ELECTRODE 0.070" aperture on detector 0.070" aperture on flashlamp distance = 23" FX-1160 FX-1150 OUTER LAMP BODY REFLECTOR (f#/0.7) -50 -40 -30 -20 -10 0 10 20 30 40 50 Angle - Degrees Spectral Data Life vs. Input Energy High Power Flashlamps 10 NUMBER OF FLASHES Relative Intensity 10 FX-1160 FX-1150 9 10 Low Power Flashlamps 10 8 0.1 300 400 500 600 700 800 Number of flashes to 50% of initial radiometric light output Medium Power Flashlamps 0.2 0.3 0.4 0.5 900 INPUT ENERGY PER FLASH (JOULES) Wavelength – nanometers Outline Dimensions Ø1.137 (28.9) .187 ±.010 (4.8) (0.25) DISCHARGE PATH 1.085 ±.015 (25.0) (0.56) 0.523 ±.010 (13.3) (0.25) 2 X Ø.080 (2.0) PINCHED OFF BELOW PIN PROFILE WINDOW Ø.562 ±.005 (14.3) (0.13) Ø1.375 (Max. (34.9) ARC LENGTH 3 X Ø.040 (1.0) For more information email us at [email protected] or visit our web site at www.perkinelmer.com/opto Note: All specifications subject to change without notice. USA: PerkinElmer Optoelectronics 35 Congress Street Salem, MA 01970 Toll Free: (800) 950-3441 (USA) Phone: (978) 745-3200 Fax: (978) 745-0894 Europe: PerkinElmer Optoelectronics Wenzel-Jaksch-Str. 31, D-65199 Weisbaden, Germany Phone: +49 (0) 611-492-437 Fax: +49 (0)611-492-159 Asia: PerkinElmer Optoelectronics 47 Ayer Rajah Crescent #06-12 Singapore 139947 Phone: +65 775 2022 Fax: +65 775 1008 . DS-225 Rev A 0901 © 2001 PerkinElmer, Inc. All rights reserved. www.perkinelmer.com/opto