SBR4U130LP 4A SBR® SUPER BARRIER RECTIFER Features • • • • • • • Mechanical Data Ultra Low Forward Voltage Drop Superior Reverse Avalanche Capability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 150ºC Operating Junction Temperature Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) • • Case: U-DFN3030-8 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – NiPdAu annealed over Copper lead frame. Solderable per MIL-STD-202, Method 208 Weight: 0.0172 grams (approximate) • • • A A A A U-DFN3030-8 C = CATHODE A = ANODE C Bottom View C C C Top View Schematic and Pin Configuration Ordering Information (Note 4) Part Number SBR4U130LP-7 Notes: Case U-DFN3030-8 Packaging 3000/Tape & Reel 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com. Marking Information STF STF = Product marking code YYWW = Date code marking YY = Last digit of year (ex: 08 for 2008) WW = Week code (01 ~ 53) SBR is a registered trademark of Diodes Incorporated. SBR4U130LP Document number: DS31392 Rev. 4 - 2 1 of 5 www.diodes.com October 2012 © Diodes Incorporated SBR4U130LP Maximum Ratings (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM VR(RMS) IO Value Unit 130 V 92 4 V A IFSM 40 A Symbol Value 55 180 -65 to +150 °C/W Thermal Characteristics Characteristic Maximum Thermal Resistance Junction to Ambient (Note 5) (Note 6) Operating and Storage Temperature Range RθJA TJ, TSTG Unit °C Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Reverse Breakdown Voltage (Note 7) Symbol V(BR)R Min 130 Typ - Max - Unit V Forward Voltage VF - 0.68 0.55 - 0.75 0.62 0.88 V Reverse Current (Note 7) IR - 18 2.5 100 20 µA mA Notes: Test Condition IR = 0.1mA IF = 4A, TJ = +25ºC IF = 4A, TJ = +125ºC IF = 10A, TJ = +25ºC VR = 130V, TJ = +25ºC VR = 130V, TJ = +125ºC 5. Device mounted on Polymide Substrate, 140mm2 copper pad, double sided, PC board. 6. Device mounted on FR-4 Substrate, 1” x 1”, 2oz. Copper, single-sided PC board. 7. Short duration pulse test used to minimize self-heating effect. SBR is a registered trademark of Diodes Incorporated. SBR4U130LP Document number: DS31392 Rev. 4 - 2 2 of 5 www.diodes.com October 2012 © Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (mA) SBR4U130LP 3.0 PD , POWER DISSIPATION (W) 2.5 2.0 1.5 1.0 0.5 0 0 TA = 150°C TA = 125°C TA = 85°C T A = 25°C 1 2 3 4 5 IF(AV), AVERAGE FORWARD CURRENT (A) 0 200 400 600 800 1,000 VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Fig. 2 Typical Forward Characteristics Fig. 1 Forward Power Dissipation IR, INSTANTANEOUS REVERSE CURRENT (µA) 10,000 TA = 150°C 1,000 T A = 125°C TA = 85°C 100 10 TA = 25°C 1 0 30 60 90 120 150 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 0.1 10 100 150 TA,DERATED AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (A) 5.0 1 4.5 Note 5 4.0 3.5 3.0 2.5 2.0 1.5 Note 6 1.0 0.5 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 5 Forward Current Derating Curve 175 125 100 75 50 25 0 0 13 26 39 52 65 78 91 104 117 130 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating SBR is a registered trademark of Diodes Incorporated. SBR4U130LP Document number: DS31392 Rev. 4 - 2 3 of 5 www.diodes.com October 2012 © Diodes Incorporated SBR4U130LP Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A U-DFN3030-8 Dim Min Max Typ A 0.57 0.63 0.60 A1 0 0.05 0.02 A3 0.15 ⎯ ⎯ b 0.29 0.39 0.34 D 2.90 3.10 3.00 D2 2.19 2.39 2.29 e 0.65 ⎯ ⎯ E 2.90 3.10 3.00 E2 1.64 1.84 1.74 L 0.30 0.60 0.45 All Dimensions in mm A3 SEATING PLANE A1 e b .2 R0 E 00 E2 L D2 D Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. Z X1 X2 G Y Dimensions Value (in mm) Z 2.59 G 0.11 X1 2.49 X2 0.65 Y 0.39 C 0.65 C SBR is a registered trademark of Diodes Incorporated. SBR4U130LP Document number: DS31392 Rev. 4 - 2 4 of 5 www.diodes.com October 2012 © Diodes Incorporated SBR4U130LP IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com SBR is a registered trademark of Diodes Incorporated. SBR4U130LP Document number: DS31392 Rev. 4 - 2 5 of 5 www.diodes.com October 2012 © Diodes Incorporated