GBPC5002 thru GBPC5010 Glass Passivated Single Phase Bridge Rectifiers Reverse Voltage 200 to 1000V Forward Current 50 Amp Features y y y y Circuit ~ Mechanical Data Case: Molded plastic case Terminals: Plated leads solderable per + - y Glass passivated die construction Integrally molded heatsink provides Very low thermal resistance for Maximum heat dissipation The plastic material used carries UL flammability recognition 94V-0 High surge current capability High temperature soldering guaranteed: 260℃ /10 seconds, 0.375” (9.5mm) lead length, 5lbs. (2.3kg) tension MIL-STD-750, Method 2026 Polarity: Marked on Body Mounting Position: Any ~ Module Type TYPE VRRM VRSM GBPC5002 GBPC5004 GBPC5006 GBPC5008 GBPC5010 200V 400V 600V 800V 1000V 300V 500V 700V 900V 1100V Maximum Ratings and Thermal Characteristics (TA = 25℃ unless otherwise noted) Symbol IF(AV) Conditions Maximum average forward output rectified current Tc =55℃ Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) IFSM i2t Visol RθJC Tj, TSTG Weight Rating for fusing (t<8.3ms) a.c.50HZ;r.m.s.;1min Maximum thermal resistance(1) Operating Junction and storage temperature range Approximate Weight Values Units 50 A 450 A 840 A2s 2500 V 0.7 -55 to +150 15 ℃/W ℃ g Values Units 1.1 V 5.0 500 µA Electrical Characteristics (TA = 25℃ unless otherwise noted) Symbol VF IR Notes: Conditions Maximum Instantaneous Forward Voltage per leg Maximum DC reverse current at rated DC blocking voltage per leg IFM =25A TA = 25℃ TA = 125℃ (1) Unit case mounted on Al plate heatsink (2) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with M5 screw Document Number: GBPC5002 thru GBPC5010 Aug.,20,2014 www.smsemi.com 1 GBPC5002 thru GBPC5010 80 60 40 20 Resistive or Inductive load 0 IFSM, PEAK FWD SURGE CURRENT (A) Mounted on a 220x220x50 mm AL plate heatsink 0 50 100 TC, CASE TEMPERATURE (ºC) Fig.1 Forward Current Derating Curve 500 150 100 10 1.0 0.1 0.01 Tj=25ºC Pulse Width=300μs 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig.2 Typical Forward Characteristics (per element) 1000 Single Half-Sine Wave (JEDEC Method) 400 Cj, CAPACITANCE (pF) I F, AVERAGE FORWARD CURRENT (A) 100 IF, INSTANTANEOUS FORWARD CURRENT (A) Performance Curves 300 200 100 100 Tj=25ºC f =1MHZ Tj=150ºC 1 10 NUMBER OF CYCLES AT 60Hz Fig.3 Max Non-Repetitive Surge Current IR, INSTANTANEOUS REVERSE CURRENT (μA) 0 100 10 0.1 1 10 100 VR, REVERSE VOLTAGE (V) Fig.4 Typical Junction Capacitance (per element) 100 Tj=125ºC 10 1.0 0.1 Tj=25ºC 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig.5 Typical Reverse Characteristics (per element) Document Number: GBPC5002 thru GBPC5010 Aug.,20,2014 www.smsemi.com 2 GBPC5002 thru GBPC5010 Package Outline Information 1.135(28.8) 1.115(28.3) CASE: GBPC 0.220(5.59) 0.200(5.08)DIA. 0.673(17.1) 0.633(16.1) ＋ ~ 1.135(28.8) 0.732(18.6) 1.115(28.3) 0.692(17.6) 0.673(17.1) 0.633(16.1) － ~ 0.582(14.8) 0.542(13.8) 0.094(2.4) DIA. 0.25 (6.35) 0.034(0.86) 0.030(0.76) 0.840(21.3) 0.740(18.8) 0.310(7.87) 0.290(7.36) Dimensions in inches (mm) Document Number: GBPC5002 thru GBPC5010 Aug.,20,2014 www.smsemi.com 3