DG4051A, DG4052A, DG4053A Vishay Siliconix 8-Channel, Dual 4-Channel, Triple 2-Channel (Triple SPDT) Multiplexers DESCRIPTION FEATURES The DG4051A, DG4052A and DG4053A are high precision CMOS analog multiplexers. The DG4051A is an 8-channel multiplexer, the DG4052A is a dual 4-channel multiplexer and the DG4053A is a triple 2-channel multiplexer or triple SPDT. Designed to operate from a + 2.7 V to + 12 V single supply or from a ± 2.5 V to ± 5 V dual supplies, the DG4051A, DG4052A and DG4053A are fully specified at + 3 V, + 5 V and ± 5 V. All control logic inputs have guaranteed 2.0 V logic high limit when operating from + 5 V or ± 5 V supplies and 1.4 V when operating from a + 3 V supply. Channel leakage is typically in the range of 10 pA, and switch charge injection is less than 0.5 pC. Coupled with very low switch capacitance, these devices are ideal for high precision signal switching and multiplexing. All switches conduct equally well in both directions, offering rail to rail analog signal switching and can be used both as multiplexers as well as de-multiplexers. The DG4051A, DG4052A and DG4053A operating temperature is specified from - 40 °C to + 125 °C and are available in 16 pin TSSOP and the ultra compact 1.8 mm x 2.6 mm miniQFN16 packages. • + 2.7 V to + 12 V single supply operation ± 2.5 V to ± 5 V dual supply operation • Fully specified at + 3 V, + 5 V, ± 5 V RoHS COMPLIANT • 100 maximum on-resistance • Low voltage, 2.5 V CMOS/TTL compatible • Low charge injection (< 0.5 pC typ.) • High - 3 dB bandwidth: 330 MHz to 700 MHz • Low switch capacitance (Cs(off) 3 pF typ.) • Excellent isolation and crosstalk performance (typ. 47 dB at 100 MHz) • 16 pin SOIC, TSSOP and miniQFN package (1.8 mm x 2.6 mm) • Fully specified from - 40 °C to + 85 °C and - 40 °C to + 125 °C • Compliant to RoHS directive 2002/95/EC APPLICATIONS • • • • • • • Instruments Healthcare and medical equipments Touch panel Automated test equipment Automation and control High precision data acquisition Communication system FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG4051A TSSOP16 DG4053A TSSOP16 DG4052A TSSOP16 X4 1 16 VCC Y0 1 16 VCC Y1 1 16 VCC X6 2 15 X2 Y2 2 15 X2 Y0 2 15 Y X 3 14 X1 Y 3 14 X1 Z1 3 14 X X7 4 13 X0 Y3 4 13 X Z 4 13 X1 X5 5 12 X3 Y1 5 12 X0 Z0 5 12 X0 ENABLE 6 11 A ENABLE 6 11 X3 ENABLE ENABLE 6 11 A VEE 7 10 B VEE 7 10 A VEE 7 10 B GND 8 9 C GND 8 9 B GND 8 9 C Logic Top View Logic Top View Top View ENABLE = LO, all switches are controlled by addr pins. ENABLE = HI, all switches are off. Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 www.vishay.com 1 DG4051A, DG4052A, DG4053A Vishay Siliconix FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG4051A mQFN-16 DG4053A mQFN-16 DG4052A mQFN-16 X6 X4 VCC X2 Y2 Y0 VCC X2 Y0 Y1 VCC Y 16 15 14 13 16 15 14 13 16 15 14 13 X 1 12 X1 Y 1 12 X1 Z1 1 12 X X7 2 11 X0 Y3 2 11 X Z 2 11 X1 X5 3 10 X3 Y1 3 10 X0 Z0 3 10 X0 ENABLE 4 9 A ENABLE 4 9 X3 ENABLE 4 9 A Logic Logic 5 6 77 8 5 6 7 8 5 6 77 8 VEE GND C B VEE GND B A VEE GND C B Top View Top View Top View Exx Pin 1 Device Marking: Exx for DG4051A (miniQFN16) Fxx for DG4052A Gxx for DG4053A xx = Date/Lot Traceability Code TRUTH TABLE Select Inputs On Switches Enable Input C B A DG4051A DG4052A DG4053A H X X X All Switches Open All Switches Open All Switches Open L L L L X to X0 X to X0, Y to Y0 X to X0, Y to Y0, Z to Z0 L L L H X to X1 X to X1, Y to Y1 X to X1, Y to Y0, Z to Z0 L L H L X to X2 X to X2, Y to Y2 X to X0, Y to Y1, Z to Z0 L L H H X to X3 X to X3, Y to Y3 X to X1, Y to Y1, Z to Z0 L H L L X to X4 X to X0, Y to Y0 X to X0, Y to Y0, Z to Z1 L H L H X to X5 X to X1, Y to Y1 X to X1, Y to Y0, Z to Z1 L H H L X to X6 X to X2, Y to Y2 X to X0, Y to Y1, Z to Z1 L H H H X to X7 X to X3, Y to Y3 X to X1, Y to Y1, Z to Z1 ORDERING INFORMATION Temp Range Package Part Number 16-Pin TSSOP DG4051AEQ-T1-E3 DG4052AEQ-T1-E3 DG4053AEQ-T1-E3 16-Pin miniQFN DG4051AEN-T1-E4 DG4052AEN-T1-E4 DG4053AEN-T1-E4 DG4051A, DG4052A, DG4053A - 40 °C to 125 °Ca Notes: a. - 40 °C to 85 °C datasheet limits apply. www.vishay.com 2 Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 DG4051A, DG4052A, DG4053A Vishay Siliconix ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted Parameter Limit V+ to V- Unit 14 GND to V- 7 V (V-) - 0.3 to (V+) + 0.3 or 30 mA, whichever occurs first a Digital Inputs , VS, VD Continuous Current (Any terminal) 30 Peak Current, S or D (Pulsed 1 ms, 10 % duty cycle) 100 Storage Temperature mA - 65 to 150 Power Dissipationb Thermal Resistanceb 16-Pin TSSOPc 450 16-Pin miniQFNd, e 525 16-Pin TSSOP 178 16-Pin miniQFNe 152 °C mW °C/W Notes: a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 5.6 mW/°C above 70 °C. d. Derate 6.6 mW/°C above 70 °C. e. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. SPECIFICATIONS FOR DUAL SUPPLIES Parameter Test Conditions Unless Otherwise Specified VCC = + 5 V, VEE = - 5 V VIN(A, B, C and ENABLE) = 2.0 V, 0.8 Va Temp.b VANALOG Full RON IS = 1 mA, VD = - 3 V, 0 V, + 3 V Room Full 66 100 125 100 118 RON IS = 1 mA, VD = ± 3 V Room Full 3 6 10 6 8 RFLATNESS IS = 1 mA, VD = - 3 V, 0 V, + 3 V Room Full 12 16 20 16 18 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Symbol - 40 °C to 125 °C - 40 °C to 85 °C Typ.c Min.d Max.d Min.d 5 -5 Max.d Unit 5 V Analog Switch On-Resistance On-Resistance Match On-Resistance Flatness Switch Off Leakage Current IS(off) ID(off) V+ = 5.5 V, V- = - 5.5 V, VD = ± 4.5 V, VS = 4.5 V ± Analog Signal Rangee -5 ID(on) V+ = 5.5 V, V- = - 5.5 V, VS = VD = ± 4.5 V Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Input Current, VIN Low IIL VIN(A, B, C and ENABLE) under test = 0.8 V Full 0.01 -1 1 -1 1 Input Current, VIN High IIH VIN(A, B, C and ENABLE) under test = 2.0 V Full 0.01 -1 1 -1 1 Input Capacitancee CIN f = 1 MHz Room 3.4 Channel On Leakage Current nA Digital Control µA pF Dynamic Characteristics Off Isolation OIRR Channel-to-Channel Crosstalk XTALK Bandwith, 3 dB Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 RL = 50 , CL = 1 pF BW RL = 50 f = 10 MHz Room 67 f = 100 MHz Room 46 f = 10 MHz Room 67 f = 100 MHz Room 47 DG4051A Room 330 DG4052A Room 450 DG4053A Room 730 dB MHz www.vishay.com 3 DG4051A, DG4052A, DG4053A Vishay Siliconix SPECIFICATIONS FOR DUAL SUPPLIES Parameter Symbol Test Conditions Unless Otherwise Specified VCC = + 5 V, VEE = - 5 V VIN(A, B, C and ENABLE) = 2.0 V, 0.8 Va - 40 °C to 125 °C - 40 °C to 85 °C Temp.b Typ.c Min.d Max.d Min.d Max.d Room Full 36 110 127 110 117 Room Full 31 108 119 108 114 Room Full 29 92 103 92 98 Unit Dynamic Characteristics Transition Time tTRANS Enable Turn-On Time tON Enable Turn-Off Time tOFF Break-Before-Make Time Delay Charge Injectione Q OIRR Channel-to-Channel Crosstalke XTALK Source Off Capacitancee CS(off) Channel On Capacitancee Total Harmonic Distortione Room Full tD Off Isolatione Drain Off Capacitancee RL = 300 , CL = 35 pF see figure 1, 2, 3 CD(off) CD(on) THD Vg = 0 V, Rg = 0 , CL = 1 nF f = 1 MHz f = 1 MHz 1 Room 0.25 Room < - 90 Room < - 90 DG4051A Room 3 DG4052A Room 3 DG4053A Room 3 DG4051A Room 12 DG4052A Room 7 DG4053A Room 4 DG4051A Room 17 DG4052A Room 13 DG4053A Room 11 Room 0.28 Room Full 0.05 Room Full - 0.05 -1 - 10 -1 - 10 Room Full - 0.05 -1 - 10 -1 - 10 RL = 50 , CL = 1 pF f = 100 kHz f = 1 MHz 1 Signal = 5 VRMS, 20 Hz to 20 kHz, RL = 600 ns pC dB pF % Power Supplies Power Supply Current I+ Negative Supply Current I- Ground Current IGND www.vishay.com 4 VCC = + 5 V, VEE = - 5 V VIN(A, B, C and ENABLE) = 0 or 5 V 1 10 1 10 µA Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 DG4051A, DG4052A, DG4053A Vishay Siliconix SPECIFICATIONS FOR UNIPOLAR SUPPLIES Test Conditions Unless Otherwise Specified VCC = + 5 V, VEE = 0 V Parameter Symbol - 40 °C to 125 °C - 40 °C to 85 °C VIN(A, B, C and ENABLE) = 2.0 V, 0.8 Va Temp.b Typ.c Min.d Max.d Min.d 5 0 Max.d Unit 5 V Analog Switch Analog Signal Rangee On-Resistance On-Resistance Match On-Resistance Flatness Switch Off Leakage Current VANALOG Full RON IS = 1 mA, VD = 0 V, + 3.5 V Room Full 107 165 205 165 194 RON IS = 1 mA, VD = + 3.5 V Room Full 3.2 8 13 8 11 RFLATNESS IS = 1 mA, VD = 0 V, + 3 V Room Full 19 26 30 26 28 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 IS(off) ID(off) V+ = + 5.5 V, V- = 0 V VD = 1 V/4.5 V, VS = 4.5 V/1 V 0 ID(on) V+ = + 5.5 V, V- = 0 V VD = VS = 1 V/4.5 V Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Input Current, VIN Low IL VIN(A, B, C and ENABLE) under test = 0.8 V Full 0.01 -1 1 -1 1 Input Current, VIN High IH VIN(A, B, C and ENABLE) under test = 2.0 V Full 0.01 -1 1 -1 1 Room Full 38 121 143 121 134 Room Full 38 110 126 110 119 Room Full 38 103 118 103 111 Channel On Leakage Current nA Digital Control µA Dynamic Characteristics Transition Time tTRANS Enable Turn-On Time tON Enable Turn-Off Time tOFF Break-Before-Make Time Delay Charge Injectione Off Isolation e RL = 300 , CL = 35 pF See Figure 1, 2, 3 Room Full tD Q OIRR Vg = 0 V, Rg = 0 , CL = 1 nF Channel-to-Channel Crosstalke XTALK RL = 50 , CL = 1 pF f = 100 kHz Source Off Capacitancee CS(off) f = 1 MHz Drain Off Capacitancee Channel On Capacitancee CD(off) CD(on) f = 1 MHz f = 1 MHz 1 Full 0.5 Room < - 90 Room < - 90 ns 1 pC dB DG4051A Room 3 DG4052A Room 3 DG4053A Room 4 DG4051A Room 13 DG4052A Room 8 DG4053A Room 5 DG4051A Room 18 DG4052A Room 14 DG4053A Room 11 Room Full 0.05 Room Full - 0.05 -1 - 10 -1 - 10 Room Full - 0.05 -1 - 10 -1 - 10 pF Power Supplies Power Supply Current I+ Negative Supply Current I- Ground Current Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 IGND VIN(A, B, C and ENABLE) = 0 V or 5 V 1 10 1 10 µA www.vishay.com 5 DG4051A, DG4052A, DG4053A Vishay Siliconix SPECIFICATIONS FOR UNIPOLAR SUPPLIES Test Conditions Unless Otherwise Specified VCC = + 3 V, VEE = 0 V Parameter Symbol - 40 °C to 125 °C - 40 °C to 85 °C VIN(A, B, C and ENABLE) = 1.4 V, 0.6 Va Temp.b Typ.c Min.d Max.d Min.d 3 0 Max.d Unit 3 V 265 298 Analog Switch Analog Signal Rangee On-Resistance Switch Off Leakage Current VANALOG Full RON Room Full 175 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 IS(off) ID(off) IS = 1 mA, VD = 1.5 V V+ = + 3.3 V, V- = 0 V VD = 0.3 V/3.0 V, VS = 3.0 V/0.3 V 0 265 310 ID(on) V+ = + 3.3 V, V- = 0 V VD = VS = 0.3 V/3.0 V Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Input Current, VIN Low IL VIN(A, B, C and ENABLE) under test = 0.6 V Full 0.01 -1 1 -1 1 Input Current, VIN High IH VIN(A, B, C and ENABLE) under test = 1.4 V Full 0.01 -1 1 -1 1 Room Full 81 172 218 172 194 Room Full 71 151 183 151 167 Room Full 69 138 161 138 151 Channel On Leakage Current nA Digital Control µA Dynamic Characteristics Transition Time tTRANS Enable Turn-On Time tON Enable Turn-Off Time tOFF Break-Before-Make Time Delay Q Isolatione OIRR Channel-to-Channel Crosstalke XTALK Source Off Capacitancee CS(off) Drain Off Capacitancee Channel On Capacitancee Room Full tD Charge Injectione Off RL = 300 , CL = 35 pF see figure 1, 2, 3 CD(off) CD(on) Vg = 0 V, Rg = 0 , CL = 1 nF RL = 50 , CL = 1 pF f = 100 kHz f = 1 MHz f = 1 MHz f = 1 MHz 1 Room 0.5 Room < - 90 Room < - 90 DG4051A Room 4 DG4052A Room 3 ns 1 pC dB DG4053A Room 4 DG4051A Room 14 DG4052A Room 8 DG4053A Room 5 DG4051A Room 19 DG4052A Room 14 DG4053A Room 11 Room Full 0.05 Room Full - 0.05 -1 - 10 -1 - 10 Room Full - 0.05 -1 - 10 -1 - 10 pF Power Supplies Power Supply Current I+ Negative Supply Current I- Ground Current IGND VIN(A, B, C and ENABLE) = 0 V or 3 V 1 10 1 10 µA Notes: a. VIN = input voltage to perform proper function. b. Room = 25 °C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 6 Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 DG4051A, DG4052A, DG4053A Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 500 300 450 T = 25 °C Is = 1 mA R ON - On-Resistance () 400 VCC = 3.0 V 350 300 VCC = 5.0 V VCC = 12 V 250 T = 25 °C Is = 1 mA 250 RON - On-Resistance () VCC = 2.7 V 200 150 100 200 VCC = + 2.7 V VEE = - 2.7 V 150 VCC = + 5.0 V VEE = - 5.0 V VCC = + 6.2 V VEE = - 6.2 V 100 50 50 0 -8 0 0 2 4 6 8 10 12 14 -6 -4 -2 0 2 4 6 VD - Analog Voltage (V) On-Resistance vs. VD and Single Supply Voltage On-Resistance vs. VD and Dual Supply Voltage 500 400 VCC = 3.0 V, VEE = 0 V Is = 1 mA 450 VCC = 5.0 V, VEE = 0 V Is = 1 mA 350 + 125 °C + 85 °C + 25 °C - 40 °C 400 - 40 °C RON - On-Resistance () RON - On-Resistance () 8 VD - Analog Voltage (V) 350 + 25 °C + 125 °C 300 + 85 °C 250 200 150 300 250 200 150 100 100 50 50 0 0 0.5 1 1.5 2 2.5 0 0.0 3 0.5 1.0 1.5 VD - Analog Voltage (V) 3.0 3.5 4.0 4.5 5.0 On-Resistance vs. Analog Voltage and Temperature at VCC = + 5 V, VEE = 0 V 10 mA 250 VCC = 5.0 V, VEE = - 5.0 V Is = 1 mA VCC = + 5 V VEE = - 5 V 1 mA + 125 °C + 85 °C + 25 °C - 40 °C 175 100 µA Supply Current (A) 200 R ON - On-Resistance () 2.5 VD - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature at VCC = + 3 V, VEE = 0 V 225 2.0 150 125 100 ICC 10 µA IEE 1 µA IGND 100 nA 75 10 nA 50 1 nA 25 0 -5 100 pA -4 -3 -2 -1 0 1 2 3 4 5 10 100 1K 10K 100K 1M 10M VD - Analog Voltage (V) Input Switching Frequency (Hz) On-Resistance vs. Analog Voltage and Temperature at VCC = + 5 V, VEE = - 5 V Supply Current vs. Input Switching Frequency Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 www.vishay.com 7 DG4051A, DG4052A, DG4053A Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 100 000 100 000 10 000 Leakage Current (pA) 10 000 Leakage Current (pA) VCC = + 13.2 V VEE = 0 V VCC = + 5.5 V VEE = - 5.5 V 1000 ID(OFF) 100 ID(ON) 1000 100 1 - 60 - 40 - 20 0 20 40 60 10 80 1 - 60 - 40 - 20 100 120 140 40 60 80 100 Leakage Current vs. Temperature Leakage Current vs. Temperature 120 140 10 tOFF VCC = + 3.0 V, VEE = 0 V 100 - 10 tON VCC = + 3.0 V, VEE = 0 V tOFF VCC = + 5.0 V, VEE = 0 V 60 40 tON VCC = + 5.0 V, VEE = 0 V 20 tOFF /tON 0 - 60 - 40 - 20 0 20 40 60 80 Loss 0 Loss, OIRR, X TALK (dB) t ON(EN), t OFF(EN) - Switching Time (ns) 20 Temperature (°C) - 20 - 30 - 40 - 50 OIRR - 60 - 70 - 80 XTALK - 90 VCC = + 5.0 V, VEE = - 5.0 V - 100 100K 100 120 140 1M 10 1G 10 Loss 0 - 20 Loss, OIRR, X TALK (dB) - 10 - 20 - 30 - 40 OIRR - 50 - 60 XTALK - 70 VCC = + 5.0 V VEE = - 5.0V RL = 50 - 80 - 90 1M Loss 0 - 10 10M 100M Frequency (Hz) DG4052A Insertion Loss, Off-Isolation, Crosstalk vs. Frequency at ± 5 V Supply www.vishay.com 8 100M DG4051A Insertion Loss, Off-Isolation, Crosstalk vs. Frequency at ± 5 V Supply Switching Time vs. Temperature - 100 100K 10M VCC = + 5.0 V VEE = - 5.0 V RL = 50 Frequency (Hz) Temperature (°C) Loss, OIRR, X TALK (dB) 0 Temperature (°C) 120 80 ID(ON) IS(OFF) IS(OFF) 10 ID(OFF) 1G - 30 - 40 - 50 OIRR - 60 XTALK - 70 - 80 VCC = + 5.0 V VEE = - 5.0 V - 90 RL = 50 - 100 100K 1M 10M 100M 1G Frequency (Hz) DG4053A Insertion Loss, Off-Isolation, Crosstalk vs. Frequency at ± 5 V Supply Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 DG4051A, DG4052A, DG4053A Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 3.0 - 40 °C to + 125 °C Q INJ - Charge Injection (pC) VT - Switching Threshold (V) 2.5 2.0 1.5 1.0 0.5 0.0 0 2 4 6 8 10 12 14 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 - 0.25 - 0.50 - 0.75 - 1.00 - 1.25 - 1.50 - 1.75 - 2.00 -5 VCC = + 5.0 V VEE = - 5.0 V VCC = + 3.0 V VEE = 0 V -4 -3 Q INJ - Charge Injection (pC) Q INJ - Charge Injection (pC) VCC = + 5.0 V VEE = - 5.0 V -4 -3 -2 -1 0 1 VCC = + 5.0 V VEE = 0 V 2 3 4 VS - Analog Voltage (V) DG4052A Charge Injection vs. Analog Voltage Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 0 1 2 3 4 5 DG4051A Charge Injection vs. Analog Voltage Switching Threshold vs. VCC Supply Voltage VCC = + 3.0 V VEE = 0 V -1 VS - Analog Voltage (V) VCC Supply Voltage (V) 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 - 0.25 - 0.50 - 0.75 - 1.00 - 1.25 - 1.50 - 1.75 - 2.00 -5 -2 VCC = + 5.0 V VEE = 0 V 5 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 - 0.25 - 0.50 - 0.75 - 1.00 - 1.25 - 1.50 - 1.75 - 2.00 -5 VCC = + 5.0 V VEE = - 5.0 V VCC = + 5.0 V VEE = 0 V VCC = + 3.0 V VEE = 0 V -4 -3 -2 -1 0 1 2 3 4 5 VS - Analog Voltage (V) DG4053A Charge Injection vs. Analog Voltage www.vishay.com 9 DG4051A, DG4052A, DG4053A Vishay Siliconix TEST CIRCUITS VCC VCC VCC 50 Ω X0 A B C VX0 50 % VA,B,C 0V X1 - X6 DG4051A X7 VO X ENABLE GND VX0 or VY0 or VZ0 VX7 VEE 300 Ω 90 % VO VX7 VX3 or VY3 VX1 or VY1 or VZ1 35 pF tTRANS VEE X0 or Y0 or Z0 ON VCC VCC X0 or Y0 VX0 or VY0 X1 - X2 or Y1 - Y2 DG4052A X3 or Y3 VX3 or VY3 A B 50 Ω ENABLE GND 90 % VO X or Y VEE tTRANS X7 ON (DG4051A) or X3 or Y3 ON (DG4052A) or X1 or Y1 or Z1 ON (DG4053A) 300 Ω 35 pF VEE VCC VCC X0 or Y0 or Z0 A or B or C VX0 or VY0 or VZ0 50 Ω DG4053A X1 or Y1 or Z1 ENABLE GND VX1 or VY1 or VZ1 VO X or Y or Z VEE 300 Ω 35 pF VEE Figure 1. Transition Time www.vishay.com 10 Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 DG4051A, DG4052A, DG4053A Vishay Siliconix TEST CIRCUITS VCC VCC VCC A B C X0 VCC 0V X1 - X7 DG4051A VX0 or VY0 or VZ0 VEE GND VO X ENABLE 50 Ω 50 % VENABLE 300 Ω 90 % VO 35 pF 90 % 0V t OFF VEE X0 or Y0 or Z0 ON VCC VCC X0 or Y0 A B t ON X7 ON (DG4051A) or X3 or Y3 ON (DG4052A) or X1 or Y1 or Z1 ON (DG4053A) VCC X1 - X3 or Y1 - Y3 DG4052A 50 Ω VEE GND VO X or Y ENABLE 300 Ω 35 pF VEE VCC VCC X0 or Y0 or Z0 A or B or C VCC X1 or Y1 or Z1 DG4053A ENABLE 50 Ω GND VO X or Y or Z VEE 300 Ω 35 pF VEE Figure 2. Enable Switching Time Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 www.vishay.com 11 DG4051A, DG4052A, DG4053A Vishay Siliconix TEST CIRCUITS VCC VCC VCC 50 Ω X0 - X7 A B C VCC VA,B,C DG4051A VX0 or VY0 or VZ0 VEE GND 300 Ω 80 % VO VO X ENABLE 50 % 0V 35 pF 0V tD VEE VCC VCC A B X0 - X3 or Y0- Y3 VCC 50 Ω DG4052A VO X or Y ENABLE VEE GND 300 Ω 35 pF VEE VCC VCC X0, X1 or Y0, Y1 or Z0, Z1 A or B or C VCC 50 Ω DG4053A ENABLE GND VO X or Y or Z VEE 300 Ω 35 pF VEE Figure 3. Break-Before-Make VCC tr < 5 ns tf < 5 ns VCC Channel Select VCC A B C VENABLE Rg OFF ON OFF 0V Xx or Yx or Zx Vg VO ENABLE GND VO X or Y or Z VEE ΔVO 1 nF VEE Figure 4. Charge Injection www.vishay.com 12 Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 DG4051A, DG4052A, DG4053A Vishay Siliconix TEST CIRCUITS VCC VCC Network Analyzer VCC A B C Network Analyzer VCC VIN A B C X0 or Y0 or Z0 Rg = 50 Ω Vg X or Y or Z ENABLE VOUT VCC V EE GND X0 or Y0 or Z0 Vg Rg = 50 Ω VOUT X or Y or Z ENABLE VEE GND 50 Ω VIN V EE 50 Ω VEE Insertion Loss = 20 log VOUT VIN Off Isolation = 20 log Figure 5. Insertion Loss VOUT VIN Figure 6. Off Isolation VCC VCC Network Analyzer A B C VCC X0 or Y0 or Z0 VIN Vg Rg = 50 Ω Channel Select VCC X0 or Y0 or Z0 | to | Xx or Yx or Zx A B C X or Y or Z 50 Ω ENABLE Xx or Yx or Zx GND VOUT VEE 50 Ω ENABLE GND Impedance Analyzer X or Y or Z VEE VEE Crosstalk = 20 log VOUT VIN Figure 7. Crosstalk VEE Figure 8. Source, Drain Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?69828. Document Number: 69828 S10-1383-Rev. E, 21-Jun-10 www.vishay.com 13 Package Information Vishay Siliconix MINI QFN-16L (1) (2) (3) (4) L1 (5) (16) L D (12) (11) (10) (9) (8) (7) (15) (6) (16) (5) (15) (6) (14) (7) (13) (8) E (13) (14) (12) (11) (10) (9) (2) (1) (3) (4) e DIM C b A A1 BACK SIDE VIEW MILLIMETERS MIN. NAM INCHES MAX. MIN. NAM MAX. A 0.70 0.75 0.80 0.0275 0.0295 0.0315 A1 0 - 0.05 0 - 0.002 b 0.15 0.20 0.25 0.0059 0.0078 0.0098 C 0.15 0.20 0.25 0.0059 0.0078 0.0098 D 2.60 BSC 0.1023 BSC E 1.80 BSC 0.0708 BSC e 0.40 BSC 0.0157 BSC L 0.35 0.40 0.45 0.0137 0.0157 0.0177 L1 0.45 0.50 0.55 0.0177 0.0196 0.0216 ECN T-06380-Rev. A, 14-Aug-06 DWG: 5954 Document Number: 74323 14-Aug-06 www.vishay.com 1 Package Information Vishay Siliconix TSSOP: 16-LEAD DIMENSIONS IN MILLIMETERS Symbols Min Nom Max A - 1.10 1.20 A1 0.05 0.10 0.15 A2 - 1.00 1.05 0.38 B 0.22 0.28 C - 0.127 - D 4.90 5.00 5.10 E 6.10 6.40 6.70 E1 4.30 4.40 4.50 e - 0.65 - L 0.50 0.60 0.70 L1 0.90 1.00 1.10 y - - 0.10 θ1 0° 3° 6° ECN: S-61920-Rev. D, 23-Oct-06 DWG: 5624 Document Number: 74417 23-Oct-06 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1