Power Management Solutions MC13883 Integrated Charger, USB On-the-Go Transceiver and Carkit Interface Overview The MC13883 is a monolithic integration of a Lithium Ion battery charger with CEA-936 carkit interfacing support and a USB On-the-Go (OTG) transceiver. Applications > Cellular handsets for GSM, CDMA, TDMA, iDEN or 3G networks > PDAs, palmtop computers > Two-way radios > Compressed audio players, such as MP3 players > Digital cameras or camcorders > Portable DVD players > Intelligent toys > Other audio products needing to interface with the CEA-936 carkit support > Other portable handheld devices Key Benefits > Consolidates charger and USB transceiver interfaces for component reduction and area savings > CEA-936 carkit support; allows cost-effective product compatibility with the new interface standard > CEA-936 carkit capable for communication, audio port multiplexing, and battery charging through a shared mini-USB interface > Modular feature set facilitates ease of system integration > The MC13883 IC is a protocol independent drop-in replacement that can supplement existing lineups for part/cost reduction in support of the emerging CEA-936 carkit standard VBUS Charge LED Key Features > Lithium Ion battery charging through a USB connector Control to Charge FETs VBUS > Multiple charger modes and configurations supported Battery + _ Charge and Battery Control Power and Control 5V LDO/ Switch > Trickle pre-charge of deeply discharged batteries VBUS Pulsing Timer VREG Out VREG LDO VCCIO Carkit Interrupt Detector L e v e l Interrupt Generator Interrupt Processor Reset S h i f t e r VBUS VBUS VBUS Detectors > USB 2.0 OTG transceiver with regulated supplies, ID detection and interrupt generation Power and Control ID Control Logic ID Detectors VREG VREG DP DM SE1 Detector SPI/I2C Interface VREG USB Control USB XCVR Microphone Audio Interface Right Speaker L e v e l S h i f t e r SPI Control to/from Processor USB Communication to/from Processor IO Supply with Processor Left Speaker Learn More: For more information about Freescale products, please visit www.freescale.com/wireless. Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2004 MC13883FS REV 1 > Reverse path capability allows power to be sourced to the VBUS pin from the battery; can be used to support phone-powered devices through the USB connector > Charge indicator LED driver ISET Logic USB Plug > Overvoltage protection for shielding products from faulty (high-voltage) charging sources > Communication and audio control follows the protocol defined by CEA-936 carkit specification > Serial peripheral interface (SPI) and inter-integrated circuit (I2C) support for flexible processor interfacing and system integration > 40-pin QFN package; 6 mm x 6 mm