SMT Inductors, SIMID Series B82442-H SIMID 2220-H High-current version Size 2220 (EIA) or 5650 (IEC) Rated inductance 1 to 10000 µH Rated current 35 to 2500 mA Construction ■ Upright ferrite drum core ■ Laser-welded winding ■ Flame-retardant encapsulation Features ■ Very high current handling capability ■ High L values ■ Suitable for reflow (IR and vapor phase) and wave soldering Applications ■ ■ ■ ■ Filtering of supply voltages, coupling, decoupling DC/DC converters Automotive electronics Telecommunications Terminals ■ ■ ■ ■ Tinned 0,4 µm Cu; 1–2 µm Ag; 5–7 µm Sn Base material CuSn6 No leaching during wave soldering Marking Marking on component: Manufacturer, L value (in nH) and tolerance of L value (coded), date of manufacture (coded) Minimum data on reel: Manufacturer, part number, ordering code, L value and tolerance of L value, quantity, date of packing Delivery mode 12-mm blister tape, wound on 330-mm ∅ reel For details on taping, packing and packing units see page 153 135 04/00 SMT Inductors, SIMID Series B82442-H SIMID 2220-H General technical data Rated inductance LR Measured with impedance analyzer HP 4194A at frequency fL Q factor Qmin Measured with impedance analyzer HP 4194A at frequency fQ Rated current IR Maximum permissible dc with inductance decrease ∆L /L0 ≤ 10 % and temperature increase of ≤ 40 K at rated temperature of 85°C Self-resonance frequency fres, min Measured with network analyzer HP 8753 DC resistance Rmax Measured at 20°C ambient temperature, measuring current < IR Climatic category In accordance with IEC 60068-1 55/125/56 (– 55°C/+ 125°C/56 days damp heat test) Solderability In accordance with IEC 60062-2-58 (215 ± 3)°C, (3 ± 0,3) s Wetting of soldering area: ≥ 90 % Resistance to soldering heat In accordance with IEC 60068-2-20 260°C, 10 s ∆L /L ≤ ± 3 % Permissible PCB bending 2 mm (100 mm long standard PCB) Weight Approx. 400 mg 136 04/00 SMT Inductors, SIMID Series B82442-H SIMID 2220-H Dimensional drawing 1) 0,7 min. 5+0,3 0,15 max. 1) 3,5±0,1 1) 0,7±0,2 5,6+0,3 5+0,3 Marking Marking SSB1261-E A Layout recommendation B C D B SSB1227-Z Dimensions (mm) A B C D Wave/reflow soldering 4,5 2,0 4,0 8,0 1) Soldering area, tinned 137 04/00 SMT Inductors, SIMID Series B82442-H SIMID 2220-H Characteristics and ordering codes Tolerance Qmin fL; fQ MHz IR mA Rmax Ω fres, min MHz Ordering code1) ± 10 % ^ K 10 10 10 7,96 7,96 7,96 2500 2350 2200 0,024 0,028 0,032 95 70 55 B82442-H1102-K B82442-H1122-K B82442-H1152-K 1,8 2,2 2,7 10 10 10 7,96 7,96 7,96 2000 1800 1700 0,040 0,048 0,056 47 42 37 B82442-H1182-K B82442-H1222-K B82442-H1272-K 3,3 3,9 4,7 10 10 10 7,96 7,96 7,96 1550 1450 1350 0,064 0,072 0,088 34 32 29 B82442-H1332-K B82442-H1392-K B82442-H1472-K 5,6 6,8 8,2 10 10 10 7,96 7,96 7,96 1250 1130 1050 0,104 0,120 0,144 26 24 22 B82442-H1562-K B82442-H1682-K B82442-H1822-K 10 12 15 10 10 10 2,52 2,52 2,52 1000 880 810 0,168 0,20 0,24 19 17 16 B82442-H1103-K B82442-H1123-K B82442-H1153-K 18 22 27 10 10 10 2,52 2,52 2,52 740 670 620 0,29 0,35 0,42 14 13 11,5 B82442-H1183-K B82442-H1223-K B82442-H1273-K 10 10 10 2,52 2,52 2,52 560 520 480 0,50 0,58 0,68 10,5 9,5 8,5 B82442-H1333-+ B82442-H1393-+ B82442-H1473-+ 10 10 10 2,52 2,52 2,52 430 400 380 0,80 0,96 1,12 7,8 7,0 6,4 B82442-H1563-+ B82442-H1683-+ B82442-H1823-+ 100 120 150 20 20 20 0,796 0,796 0,796 350 320 290 1,28 1,52 1,76 6,0 5,4 4,8 B82442-H1104-+ B82442-H1124-+ B82442-H1154-+ 180 220 270 20 20 20 0,796 0,796 0,796 270 240 220 2,24 2,72 3,36 4,4 3,9 3,6 B82442-H1184-+ B82442-H1224-+ B82442-H1274-+ LR µH 1,0 1,2 1,5 33 39 47 56 68 82 ±5% ^ J ± 10 % ^ K 1) Replace the + by the code letter for the required inductance tolerance (see table). 138 04/00 SMT Inductors, SIMID Series B82442-H SIMID 2220-H Characteristics and ordering codes (continued) fres, min MHz Ordering code1) 3,92 4,64 5,60 3,2 2,9 2,6 B82442-H1334-+ B82442-H1394-+ B82442-H1474-+ 150 140 130 6,80 8,00 10,4 2,4 2,2 2,0 B82442-H1564-+ B82442-H1684-+ B82442-H1824-+ 0,252 0,252 0,252 120 105 100 12,0 13,6 16,0 1,8 1,5 1,4 B82442-H1105-+ B82442-H1125-+ B82442-H1155-+ 30 30 30 0,252 0,252 0,252 85 75 65 24,0 28,0 44,0 1,3 1,2 1,1 B82442-H1185-+ B82442-H1225-+ B82442-H1275-+ 3300 3900 4700 30 30 30 0,252 0,252 0,252 55 53 50 48,0 56,0 62,4 1,0 1,0 0,9 B82442-H1335-+ B82442-H1395-+ B82442-H1475-+ 5600 6800 8200 10000 30 30 30 30 0,252 0,252 0,252 0,0796 46 42 39 35 68,0 88,0 100 120 0,8 0,7 0,6 0,5 B82442-H1565-+ B82442-H1685-+ B82442-H1825-+ B82442-H1106-+ LR µH Tolerance Qmin fL; fQ MHz IR mA ±5% ^ J 20 20 20 0,796 0,796 0,796 200 180 170 20 20 20 0,796 0,796 0,796 1000 1200 1500 30 30 30 1800 2200 2700 330 390 470 560 680 820 ± 10 % ^ K Rmax Ω 1) Replace the + by the code letter for the required inductance tolerance (see table). 139 04/00 SMT Inductors, SIMID Series B82442-H SIMID 2220-H Impedance |Z | versus frequency f measured with impedance analyzer HP 4191A / HP 4194A Inductance L versus dc load current IDC measured with LCR meter HP 4275A Q factor versus frequency f measured with impedance analyzer HP 4191A Current derating Iop/IR versus ambient temperature TA SSB1257-L 80 SSB0893-E 1,2 Iop ΙB IΙRR Q 1,0 60 0,8 40 0,6 0,4 20 0 1 µH 10 µH 100 µH 1000 µH 10000 µH 10 1 10 2 0,2 10 3 10 4 kHz 10 5 f 0 0 140 04/00 20 40 60 80 100 C 140 TA