Skyworks EN41-D165-002 Skylite multimode multiband power amplifier module Datasheet

PRODUCT SUMMARY
SKY77645-11 SkyLiTE™ Multimode Multiband Power
Amplifier Module
Applications
Description
• Multiband 3G / LTE handsets
Skyworks SKY77645-11 SkyLiTE™ is a multimode multiband
(MMMB) Power Amplifier Module (PAM) that supports 3G / 4G
handsets and operates efficiently in CDMA, WCDMA, TD-SCDMA,
and LTE modes. The module is fully programmable through a
Mobile Industry Processor Interface (MIPI®).
• CDMA Bands BC0, BC1, BC4, BC6, BC10, BC15
• WCDMA Bands
I, II, III, IV, V, VIII, IX
• TD-SCDMA Bands 34, 39
• FDD LTE Bands
1, 2, 3, 4, 5, 7, 8, 9, 12, 13, 17, 20, 25, 26, 28, 30
• TDD LTE Band
38, 39, 40, 41
Features
• Two T/R (RX) port and 10 outputs
• Industry-leading PAE for 3G/4G
• Optimized for APT DCDC operation
• Fully programmable Mobile Industry Processor Interface (MIPI)
control
• MIPI programmable bias modes optimize best efficiency /
linearity trade-off for 3G and 4G; minimizes DG09 for 3G.
• Small, low profile package:
- 4.0 x 6.8 x 0.75 mm
- 42-pad configuration
The PAM consists of a WCDMA / LTE block for low, high, and midbands, and a Multi-Function Control (MFC) block, RF input/output
ports internally matched to 50 Ω to reduce the number of external
components. A CMOS integrated circuit uses standard MIPI
controls to provide the internal MFC interface and operation.
Extremely low leakage current maximizes handset standby time.
The InGaP die and the silicon die and passive components are
mounted on a multi-layer laminate substrate. The assembly is
encapsulated in a 4.0 mm x 6.8 mm x 0.75 mm, 42-pad MCM,
SMT package which is a more highly manufacturable, low cost
solution.
3G: The SKY77645-11 supports CDMA, WCDMA, High-Speed
Downlink Packet Access (HSDPA), High Speed Uplink Packet
Access (HSUPA), High Speed Packet Access (HSPA+), and TDSCDMA modulations. Varying the input power level provides
output power control. VCC is adjusted using a DCDC converter to
maximize efficiency for each power level and modulation type.
4G: The SKY77645-11 supports 1.4, 3, 5, 10, 15, 20, 30, 35, 40
MHz channel bandwidths. Similar to 3G operation, output power is
controlled by varying the input power and VCC is adjusted using a
DCDC converter to maximize efficiency for each power level.
3G / 4G Modulation scheme includes:
• WCDMA Voice Release 99
• HSDPA categories
• HSUPA
• HSPA+
• TD-SCDMA
• CDMA2000 1xRC1, 1xRC3
• CDMA2000 EVDO
• FDD LTE
• TDD LTE
• Uplink Carrier Aggregation (CA) support for
Band 39 (up to 35 MHz) and Band 40/41 (up to 40 MHz)
Skyworks Solutions, Inc. • Phone [781] 376–3000 • Fax [781] 376–3100 • [email protected] • www.skyworksinc.com
203999A • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • April 25, 2016
1
Ordering Information
Product Name
Order Number
Evaluation Board Part Number
SKY77645-11 SkyLiTE Multimode Multiband Power Amplifier Module
SKY77645-11
EN41-D165-002
™
Copyright © 2016, Skyworks Solutions Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions Inc. (“Skyworks”) products or services. These materials including the information contained herein are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation products services specifications or product descriptions at any time without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts incompatibilities or other difficulties arising from any future changes.
No license whether express implied by estoppel or otherwise is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials products or information
provided hereunder including the sale distribution reproduction or use of Skyworks products information or materials except as may be provided in Skyworks Terms and Conditions of Sale.
THE MATERIALS PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND WHETHER EXPRESS IMPLIED STATUTORY OR OTHERWISE INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE MERCHANTABILITY PERFORMANCE QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT, ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION TEXT GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES INCLUDING BUT NOT LIMITED TO ANY SPECIAL INDIRECT INCIDENTAL STATUTORY OR CONSEQUENTIAL DAMAGES INCLUDING WITHOUT LIMITATION LOST
REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
Skyworks products are not intended for use in medical lifesaving or life-sustaining applications or other equipment in which the failure of the Skyworks products could lead to personal injury death
physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products which may deviate from published specifications as a result of design defects errors or operation of products
outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance customer product design or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and SkyLiTE are trademarks or registered trademarks of Skyworks Solutions Inc. in the United States and other countries. Third-party brands and names are for
identification purposes only and are the property of their respective owners. Additional information including relevant terms and conditions posted at www.skyworksinc.com are incorporated by
reference.
Similar pages