AUTOMOTIVE LUXEON Altilon SMD Automotive forward lighting source LUXEON Altilon SMD is specifically designed and tested to meet and exceed expectations for reliability, performance, and lifetime in automotive forward lighting applications. It is designed to be assembled with industry standard soldering reflow lines simplifying system integration and lowering assembly costs. LUXEON Altilon SMD provides industry-best thermal performance in LED forward lighting applications, meeting both SAE and ECE color specifications with finer granularity than existing systems. PPAP documentation is available upon request. All LUXEON Altilon SMD LEDs are IEC-60810 qualified. Features and Benefits Primary ApplicationS Higher drive current capability for increased flux performance Adaptive Lighting Low thermal resistance and power consumption results in simplified thermal management and system cost –– AFS High flux output provides flexibility in styling and optical design Daytime Running Lights Surface mount device to reduce overall costs Front Fog Headlight –– Low Beam –– High Beam –– Static Bending RoHS COMPLIANT DS175 LUXEON Altilon SMD Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Forward Current and Voltage Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Color Shift Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Operating Limits Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Designing with LUXEON Altilon SMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Color Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Product Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON Altilon SMD LEDs are tested and binned using a 20ms monopulse (MP) at 1000mA drive current, case temperature, Tc, of 85ºC. Part Number Nomenclature Part numbers for LUXEON Altilon SMD follow the convention below: A 1 S B – 5 8 5 0 B D H 0 C C C C 0 Where: B – designates number of die (2, 3, 4 or 5) C C C C – designates minimum flux bin Therefore, the following part number is used for a LUXEON Altilon SMD with 3 die and a minimum of 780 lumens: A 1 S B – 5 8 5 0 3 D H 0 0 7 8 0 0 Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Altilon SMD is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1. Product selection for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C. CONFIGURATION Part Number 1x2 A1SB-58502DH0xxxx0 1x3 A1SB-58503DH0xxxx0 1x4 A1SB-58504DH0xxxx0 1x5 A1SB-58505DH0xxxx0 Optical Characteristics Table 2. Typical optical characteristics for LUXEON Altilon SMD at 1000mA, Tc=85°C. Correlated Color Temperature Minimum Maximum Typical Total Included Angle [1] θ0.90V A1SB-58502DH0xxxx0 5500K 6250K 140° 120° A1SB-58503DH0xxxx0 5500K 6250K 140° 120° A1SB-58504DH0xxxx0 5500K 6250K 140° 120° A1SB-58505DH0xxxx0 5500K 6250K 140° 120° Part Number Typical Viewing Angle [2] θ1/2 Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 3 Electrical and Thermal Characteristics Table 3. Typical electrical and thermal characteristics for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C. PERFORMANCE Parameter 1x2 Forward Voltage, Vf [1] Electrical Thermal Resistance, Rth j-c electr [2] Real Thermal Resistance, Rth j-c real [3] 1x3 1x4 1x5 min 5.5 8.2 11.1 13.8 max 7.0 10.3 13.6 16.9 typ 2.2°C/W 1.8°C/W 1.5°C/W 1.2°C/W max 2.5°C/W 2.1°C/W 1.8°C/W 1.5°C/W typ 3.2°C/W 2.6°C/W 2.2°C/W 1.8°C/W max 3.5°C/W 3.0°C/W 2.6°C/W 2.2°C/W Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Rth j-c electr: Electrical thermal resistance (junction to case). 3. Rth j-c real: Real thermal resistance (junction to case) with wall plug efficiency included. Reference JESD51-51, JESD51-14, 4.1.3. Absolute Ratings Table 4. Absolute ratings for LUXEON Altilon SMD. PERFORMANCE Parameter 1x2 1x3 Minimum DC Forward Current 100mA Maximum DC Forward Current 1500mA Operating Case Temperature at 700mA [1, 2] -40°C to 130°C Maximum Junction Temperature [1, 2. 3] 150°C Operating Case Temperature at Maximum Current -40°C to 125°C Maximum Junction Temperature for Short Time Applications [4] 175°C Maximum Vf at 1500mA & -40°C [1, 3] Minimum Vf at 1500mA & 150°C 7.8 11.6 5.5 8.1 LED Storage Temperature -40°C to 130°C Soldering Temperature JEDEC 020c 260°C Allowable Reflow Cycles 2 ESD Sensitivity [5] Reverse Voltage (Vreverse) 1x4 1x5 15.4 19.3 11.0 13.6 8kV HBM, 2kV CDM, 400V MM LUXEON Altilon SMD LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain junction temperature below the maximum, so that the LED is maintained below the maximum rated operating case temperature. 2. LUXEON Altilon SMD LEDs driven at or above the maximum rated operating case temperature may have shorter lifetime. 3. Please consult with Lumileds for more information on maximum time durations and forward currents for these temperatures. 4. Short time operations of less than 200hrs. 5. Measured using human body model (per JESD22 A114), machine model (per JESD22 A115) and charged device model (per JESD22 C101). DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 4 Characteristic Curves Spectral Power Distribution Characteristics Figure 1. Typical normalized power vs. wavelength for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C. Light Output Characteristics Figure 2a. Typical normalized light output vs. case temperature for LUXEON Altilon SMD at 1000mA, 20ms MP. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 5 Figure 2b. Typical normalized light output vs. forward current for LUXEON Altilon SMD at Tc=85°C. Forward Current and Voltage Characteristics Figure 3a. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x2 at Tc=85°C. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 6 Figure 3b. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x3 at Tc=85°C. Figure 3c. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x4 at Tc=85°C. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 7 Figure 3d. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x5 at Tc=85°C. Figure 3e. Typical forward voltage shift vs. case temperature for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 8 Color Shift Characteristics Figure 4a. Typical color shift in CIE 1931 x and y coordinates for LUXEON Altilon SMD at 1000mA, 20ms MP. Figure 4b. Typical color shift over angle for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 9 Radiation Pattern Characteristics Figure 5. Typical radiation pattern for LUXEON Altilon SMD at 1000mA, 20ms MP. Operating Limits Characteristics Figure 6. Maximum forward current vs. case temperature for LUXEON Altilon SMD. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 10 Product Bin and Labeling Definitions Designing with LUXEON Altilon SMD Flux bins supportable for car programs depend on product color and program start- and end-of-production date. Flux roadmaps by year and product color are maintained and available from the sales representative. Please contact a local sales representative to request the flux bin range with best supportability for program timing. Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheets. For this reason, Lumileds bins the LED components for luminous flux or radiometric power, forward voltage, color point, peak wavelength, or dominant wavelength. The CAT code identifies the flux and color bin of each part. The CAT code can be found in two distinct places, the package label and the TnR label. LUXEON Altilon SMD LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: A B C D Where: A – designates minimum luminous flux per die (F=280, G=290, K=320, etc.) B – designates number of die (2, 3, 4 or 5) C D – designates color bin (example: 1D, 2C, 3B, 4A, etc.) Therefore, a LUXEON Altilon SMD 1x5 with a minimum luminous flux of 280 and a color bin of 3B has the following CAT code: F 5 3 B Luminous Flux Bins Table 5 lists the standard luminous flux bins for LUXEON Altilon SMD emitters. Product availability in a particular bin varies by color and platform start of production date. Contact your local sales representative for best supportability of programs. Table 5a. Luminous flux bin definitions for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C. Bin Luminous Flux [1] (lm) per Die Minimum Maximum F 280 290 G 290 300 H 300 310 J 310 320 K 320 330 L 330 340 M 340 350 N 350 360 Notes for Table 5: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. 2. Product availability in a particular bin varies by color and platform start of production date. 3. Contact local sales representative for best supportability of programs. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 11 Table 5b. Luminous flux bin definitions for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C. Bin 2 (1x2) 3 (1x3) 4 (1x4) 5 (1x5) F 560 840 1120 1400 G 580 870 1160 1450 H 600 900 1200 1500 J 620 930 1240 1550 K 640 960 1280 1600 The total flux bin is defined on a per die basis, the first letter on the flux bin will define the minimum flux per die and the second letter will define the number of die in the device, i.e. C4 where C will designate a minimum flux per die of 250 lm and 4 will designate that the part has four die, therefore the total flux from the device will be a minimum of 1000 lm. This will allow for better flux bin granularity, as a 1x2 will have 20 lm flux bin increments, a 1x3 30 lm, a 1x4 40 lm and a 1x5 50 lm. The flux bin is defined on the total flux of the device as die are not individually measured. Color Bin Structure 0.38 0.37 0.36 y 0.35 0.34 0.33 0.32 0.31 0.3 0.3 0.31 0.32 0.33 x 0.34 0.35 0.36 Figure 7. Color bin structure in CIE 1931 color space for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 12 Color Codes Table 6. Color code definitions for LUXEON Altilon SMD at 1000mA 20ms MP, Tc=85°C. Code 1A 1B 1C 1D [3] 2A 2B 2C [3] 2D x [1, 2] y [1, 2] 0.3109 0.3382 0.3161 0.3432 0.3169 0.3353 0.3120 Typical CCT (K) x [1, 2] y [1, 2] 0.3242 0.3506 0.3325 0.3579 0.3325 0.3493 0.3306 0.3246 0.3424 0.3120 0.3306 0.3246 0.3424 0.3169 0.3353 0.3325 0.3493 0.3177 0.3277 0.3324 0.3410 0.3131 0.3232 0.3249 0.3344 0.3161 0.3432 0.3325 0.3579 0.3242 0.3506 0.3412 0.3652 0.3246 0.3424 0.3406 0.3562 6390 6390 6050 Code 3A 3B [3] 3C 0.3169 0.3353 0.3325 0.3493 0.3169 0.3353 0.3325 0.3493 0.3246 0.3424 0.3406 0.3562 0.3249 0.3344 0.3401 0.3476 0.3177 0.3277 0.3324 0.3410 0.3109 0.3211 0.3249 0.3344 0.3177 0.3277 0.3324 0.3410 0.3185 0.3203 0.3323 0.3329 0.3120 0.3139 0.3253 0.3266 0.3120 0.3139 0.3253 0.3266 0.3185 0.3203 0.3323 0.3329 0.3192 0.3131 0.3323 0.3251 0.3131 0.3070 0.3256 0.3191 0.3177 0.3277 0.3324 0.3410 0.3249 0.3344 0.3401 0.3476 0.3253 0.3266 0.3396 0.3392 0.3185 0.3203 0.3323 0.3329 0.3185 0.3203 0.3323 0.3329 0.3253 0.3266 0.3396 0.3392 0.3256 0.3191 0.3392 0.3310 0.3192 0.3131 0.3323 0.3251 6050 6460 6460 6050 6050 3D 4A [3] 4B 4C 4D Typical CCT (K) 5680 5680 5350 5350 5680 5680 5350 5350 Notes for Table 6: 1. LUXEON Altilon SMD emitters are tested and binned by x and y coordinates. 2. Lumileds maintains a tester tolerance of ±0.005 on x and y coordinates. 3. Color bins 1D, 2C, 3B and 4A are currently supportable. Ask your sales representative about supportability of the different color bins. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 13 Mechanical Dimensions ANGULARITY TOLERANCE 2.5 at 2 PLACES 2.70 ±0.075* 1.06 CL 0.13 0.13 0.84 ±0.075* 0.35 1.05 (2x) 0.88 1.20 (2x) R0.13 (8x) 1.06 3.00 ±0.075* 0.50 ANODE 1.05 (2x) R0.25 (8x) 2X LIGHT EMITTER LASER MARK 0.3x1.1 2.21 0.45 1.00 (2x) CATHODE Figure 8. Mechanical dimensions for LUXEON Altilon SMD 1x2. ANGULARITY TOLERANCE 2.5 at 3 PLACES 3.85 ±0.075* 1.06 0.12 0.84 ±0.075* CL 0.13 0.35 1.63 (2x) R0.13 (8x) 0.88 1.20 (2x) 1.06 3.00 ±0.075* ANODE 0.50 1.05 (2x) R0.25 (8x) 3.36 B 3X LIGHT EMITTER LASER MARK 0.3x1.1 0.55 1.53 (2x) CATHODE Figure 9. Mechanical dimensions for LUXEON Altilon SMD 1x3. Notes for Figures 8 and 9: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 14 ANGULARITY TOLERANCE 2.5 at 4 PLACES 5.00 ±0.075* 1.06 0.42 0.84 ±0.075* CL 0.88 0.13 0.50 1.83 (2x) R0.13 (8x) 1.20 (2x) 1.06 3.00 ±0.075* ANODE 0.50 1.05 (2x) 4X LIGHT EMITTER 4.51 R0.25 (8x) LASER MARK 0.3x1.1 1.76 (2x) 0.65 CATHODE Figure 10. Mechanical dimensions for LUXEON Altilon SMD 1x4. 6.15 ±0.075* 1.06 ANGULARITY TOLERANCE 2.5 at 5 PLACES 0.84 ±0.075* CL 0.88 0.58 0.50 2.25 (2x) 0.13 R0.13 (8x) 1.20 (2x) 1.06 3.00 ±0.075* ANODE 0.50 1.05 (2x) R0.25 (8x) 5.66 5X LIGHT EMITTER LASER MARK 0.3x1.1 0.75 2.13 (2x) CATHODE Figure 11. Mechanical dimensions for LUXEON Altilon SMD 1x5. Notes for Figures 10 and 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 15 Reflow Soldering Guidelines Figure 12. Visualization of the acceptable reflow temperature profile as specified in Table 7. Table 7. Reflow profile characteristics for LUXEON Altilon SMD. PROFILE FEATURE Lead Free Assembly Preheat Minimum Temperature (Tsmin) 150°C Preheat Maximum Temperature (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 to 180 seconds Ramp-Up Rate (Tsmax to Tp) 3°C / second maximum Liquidus Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 260°C Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate 6°C / second maximum Time 25°C to Peak Temperature 8 minutes maximum Notes for Table 7: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. JEDEC Moisture Sensitivity Table 8. Moisture sensitivity levels for LUXEON Altilon SMD. level 1 Floor Life TIme Conditions Unlimited ≤30°C / 85% RH DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 16 Solder Pad Design Details for recommended solder pad designs that provide low thermal resistance will be published in a separate application brief. These recommendations are not intended to represent specifications for soldering LUXEON Altilon SMD LEDs. Thermal Thermal Anode Cathode Figure 13. Recommended PCB solder pad layout for LUXEON Altilon SMD. Notes for Figure 13: 1. All dimensions are in millimeters. 2. The thermal pads are electrically isolated from the anode and cathode contact pads. Packaging Information Pocket Tape Dimensions B A A B Ao: Bo: Ko: K1: Pitch: 3.25±0.10 2.95±0.10 1.30±0.10 8.00±0.10 Width: 12.00±0.15 Figure 14. Pocket tape dimensions for LUXEON Altilon SMD 1x2. Notes for Figure 14: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 17 B A A B Ao: Bo: Ko: K1: Pitch: 3.25±0.10 4.10±0.10 1.30±0.10 8.00±0.10 Width: 12.00±0.15 Ao: Bo: Ko: K1: Pitch: 3.25±0.10 5.25±0.10 1.30±0.10 8.00±0.10 Width: 12.00±0.15 Figure 15. Pocket tape dimensions for LUXEON Altilon SMD 1x3. B A A B Figure 16. Pocket tape dimensions for LUXEON Altilon SMD 1x4. Notes for Figures 15 and 16: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 18 B A A B Ao: Bo: Ko: K1: Pitch: 3.25±0.10 6.40±0.10 1.30±0.10 8.00±0.10 Width: 12.00±0.15 Figure 17. Pocket tape dimensions for LUXEON Altilon SMD 1x5. Notes for Figure 17: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Reel Dimensions SPI=1000 Figure 18. Reel dimensions for LUXEON Altilon SMD 1x2. Notes for Figure 18: 1. Drawings are not to scale. 2. All dimensions are in millimeters. 3. SPI=1000 (SPI is the number of LEDs per reel). For Altilon SMD, all reels ship with 1000 LEDs. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 19 SPI=1000 Figure 19. Reel dimensions for LUXEON Altilon SMD 1x3. SPI=1000 Figure 20. Reel dimensions for LUXEON Altilon SMD 1x4. Notes for Figures 19 and 20: 1. Drawings are not to scale. 2. All dimensions are in millimeters. 3. SPI=1000 (SPI is the number of LEDs per reel). For Altilon SMD, all reels ship with 1000 LEDs. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 20 SPI=1000 Figure 21. Reel dimensions for LUXEON Altilon SMD 1x5. Notes for Figure 21: 1. Drawings are not to scale. 2. All dimensions are in millimeters. 3. SPI=1000 (SPI is the number of LEDs per reel). For Altilon SMD, all reels ship with 1000 LEDs. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 21 Product Labeling LUXEON Altilon SMD LEDs are packaged in moisture barrier bags on reels. Both moisture barrier bag and reels have printed information providing part numbers with CAT codes that indicate luminous flux, color and forward voltage bins. Figure 22. Example of a product label for LUXEON Altilon SMD. Notes for Figure 22 – Outer Box Label descriptions for customer use: Field labels not described are for Lumileds internal use only. 1. Total number of LED emitters in a shipment box. 2. Lumileds part number 3. Customer part number for custom requests only. 4. LED test date in YYWW format. 5. Unique product lot identification number. This number is required for traceability purposes. 6. Country code of origin of manufacturing of part (e.g. MY for Malaysia, CN for China) according to ISO 3166-1 alpha-2 document. 7. Product bin 4-digit alphanumeric CAT code. DS175 LUXEON Altilon SMD Product Datasheet 20171211 ©2017 Lumileds Holding B.V. All rights reserved. 22 About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com. ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS175 LUXEON Altilon SMD Product Datasheet 20171211 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents.