DC-DC Converter DIP-Package DNV-6 SERIES, 6WATT, 2:1 INPUT RANGE FEATURES: 3 years warranty 1500Vdc isolation voltage Metal/Plastic case with low ripple and noise Operating temperature range -40°C to +85°C Short circuit and input under voltage protection Output voltage (Vdc) Output current (mA) Efficiency Typ. DNV6-1211 5 1200 82% DNV6-1212 12 500 82% DNV6-1213 15 400 82% 24 250 82% ±5 600 82% DNV6-1222 ±12 250 82% DNV6-1223 ±15 200 82% DNV6-1224 ±24 125 82% DNV6-2411 5 1200 82% DNV6-2412 12 500 82% DNV6-2413 15 400 82% 24 250 82% ±5 600 82% DNV6-2422 ±12 250 82% DNV6-2423 ±15 200 82% DNV6-2424 ±24 125 82% DNV6-4811 5 1200 82% DNV6-4812 12 500 82% DNV6-4813 15 400 82% 24 250 82% ±5 600 82% DNV6-4822 ±12 250 82% DNV6-4823 ±15 200 82% DNV6-4824 ±24 125 82% Model DNV6-1214 DNV6-1221 DNV6-2414 DNV6-2421 DNV6-4814 DNV6-4821 Input voltage (Vdc) 12(9~18) 24(18~36) 48(36~72) Notes: other input and output models may available on request. Above models are default to plastic case, you may request for the models with metal case, plus “M” in the suffix. www.pairuigroup.com Page: 1 / 3 Date: 02/10/2013 DC-DC Converter DIP-Package DNV-6 SERIES, 6WATT, 2:1 INPUT RANGE ELECTRICAL Output voltage accuracy --- Vo1, Vo2 : ±1.0%, ±3.0% Line regulation Nominal Load, full voltage Vo1, Vo2 : ±0.2%, ±1.5% Load regulation 20% ~ 100% full load Vo1, Vo2 : ±0.5%, ±4.0% 25% Nominal load step ∆Vo1/∆t: ±4.0%/500μs Dynamic response (transient/recovery time) Vo≤5.0V, ≤50mVp-p Ripple and noise 20MHz BM, full load Vo≥48V, ≤180mVp-p Other, ≤50mVp-p Operating frequency Typical value 300KHz typ./330KHz max. Turn-on delay time Typical value ≤200ms Isolation voltage Input to output (<0.5mA/min) Input to case Efficiency Nominal input, full load Operating temperature range --- -40°C to +85°C Storage temperature range --- -55°C to +120°C Short circuit protection --- Auto-recovery Input under voltage protection 1500Vdc 500Vdc Vo≤5.0V, 80% typ. Vo>5.0V, 82% typ. When input voltage is lower than the Auto-recovery low terminal input voltage Relative humidity --- 10%-90% max. MTBF Bellcore TR-332, 25°C 2x105Hrs Notes: Unless otherwise specified, all the parameters of the test conditions are as follows: ambient temperature 25 , the nominal input voltage, pure resistive nominal load. ℃ MECHANICAL CONNECTION www.pairuigroup.com Page: 2 / 3 ISOLATED PIN # SINGLE DUAL 2 -Vin -Vin -Vin 3 -Vin -Vin -Vin 9 NC COM GND2 10 No Pin No Pin No Pin 11 NC -Vo2 +Vo2 14 +Vo +Vo1 +Vo1 15 No Pin No Pin No Pin 16 GND COM GND1 22 +Vin +Vin +Vin 23 +Vin +Vin +Vin TWIN Date: 02/10/2013 DC-DC Converter DIP-Package DNV-6 SERIES, 6WATT, 2:1 INPUT RANGE TEMPERATURE PROFILE NOTES RECOMMENDED TEST AND APPLICATION CIRCUIT FUSE: depends on the actual input current; TVS: depends on the actual input voltage; Recommended capacitor: C1,C2,C5,C8, about 0.1uF; C6: 22uF-100uF; C7, C9: 10uF/10mA. www.pairuigroup.com Page: 3 / 3 Date: 02/10/2013