DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM AlInGaP With Lens : DWx-SK3 TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > High brightness surface mount LED using thin film technology. 30° viewing angle. Small package outline (LxWxH) of 3.6 x 2.8 x 3.5 mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Lighting: architecture lighting, general lighting, garden light, channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 27/12/2013 V2.0 DOMINANT TM AlInGaP With Lens : DWx-SK3 Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number DWP-SK3-TU2-1 Viewing Angle˚ Color Pure Green, 560nm Luminous Intensity @ IF = 30mA Min. Typ. Max. 450.0 285.0 30 715.0 NOTE 1. All part number above comes in a quantity of 500 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. An optional Vf bining is also available upon request. Bining scheme is as per following table. Electrical Characteristics at Tj=25˚C Vf @ If = 30mA Part Number Min. (V) Typ. (V) Max. (V) Vr @ Ir = 10uA Min. (V) DWx-SK3 1.90 2.20 2.60 12 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA Reverse voltage 12 V ESD threshold (HBM) 2 kV 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 135 mW LED junction temperature Power dissipation (at room temperature) 2 27/12/2013 V2.0 DOMINANT TM AlInGaP With Lens : DWx-SK3 Opto Technologies Innovating Illumination Wavelength Grouping at Tj= 25˚C Color DWP; Pure Green Group Wavelength distribution (nm) Full 555.5 - 564.5 X 555.5 - 558.5 Y 558.5 - 561.5 Z 561.5 - 564.5 Dominant wavelength is measured with an accuracy of ± 1 nm at a drive current of 50mA Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group T1 285.0 ... 355.0 T2 355.0 ... 450.0 U1 450.0 ... 560.0 U2 560.0 ... 715.0 Luminous intensity is measured with an accuracy of ± 11%. 3 27/12/2013 V2.0 UNDER DEVELOPMENT DOMINANT Opto Technologies DOMINANT TM AlInGaP Lens Opto Technologies Engineering reference data are not verified. The specifications areWith subject to : DWx-SK3 Innovating Illumination Relative Intensity, Normalized at 20mA Relative Intensity; Normalized at 20mA RelativeIntensity; Relative 50mA Intensity, Normlaized Normalized at 30mA change without notice. Forward Current Vs Forward Voltage Relative Intensity Vs Forward Current Forward Vs Forward Voltage Relative Forward Forward Current Vs Forward Voltage RelativeIntensity intensityVs vs. forwardCurrent current. Forward current vs. Current forward voltage. Forward Current Vs Forward Voltage Relative 3.5 Luminous Intensity Vs Forward Current 50 3 2.2 3 1.6 22 1.4 1.2 1.5 1.5 1 1 0.8 1 0.6 0.5 0.4 0.5 0 0.2 0 0 0 0 Forward Current, mA Forward Current, mAmA Forward Current; 1.8 35 3.00 2.5 2.5 Normalized IV @ 30mA 2 Intensity vs Current 0 10 30 2.50 90 40 80 70 25 30 60 20 50 20 2.00 1.50 1.00 0.50 15 40 10 30 10 5 0.00 10 100 0 20 30 20 40 40 5060 60 80 100 0 2020 40 60 If 50 80 60 100 (mA) 30 Current; 40 Forward mA 20 10 0 0 2 1.2 2.51.4 3 3.5 4 4 1.63Forward 1.8 3.5 2 2.2 Voltage; V 2.4 4.5 Forward Voltage, V Forward Voltage, V Forward Current, Forward Current, mA mA Radiation pattern. Maximum current vs. temperature. Relative Intensity Vs Wavelength Relative Intensity vs Wavelength Relative Intensity Vs Wavelength Forward TBD Current Vs Ambient Temperature Maximum Current Vs Temperature Maximum Current Vs Temperature 1 30 1 0.91 60 60 25 Forward Current, mA Forward Current; Forward Current, mAmA 0.9 0.8 0.9 Relative Intensity Relative Intensity 50 50 20 0.8 0.7 0.8 0.7 0.6 0.7 40 40 15 0.6 0.5 0.6 0.5 0.4 0.5 30 30 10 0.4 0.3 0.4 20 20 5 0.3 0.2 0.3 0.2 0.1 0.2 0.1 0.1 0 10 10 0 0 0 0 10 20 30 40 50 60 70 80 90 100 0 20 40 60 80 100 0 10 20 30 40 50 60 70 80 90 100 110 120 0 Temperature RelativeAmbient Intensity vs. Wavelength Ambient Temperature Ambient Temperature TBD 0400 500 400 450 500 550 600 450 500 600 700 550 650 600 Wavelength; nm 800 650 700 700 Wavelength, nm Wavelength; nm o) Plot ofPattern R30 vs (2Ө=30 V30 Radiation Wavelength Shift vs Forward Current (True Green) Wavelength Shift Vs Forward Current (Blue) 1 3.6 14 3.2 12 2.8 Wavelength Shift; nm Wavelength Shift; nm Relative Intensity 2.5 2.4 2 0.5 1.6 1.2 0.8 0.4 0 -0.4 0 -0.8 10 8 6 4 2 0 -2 -4 -1.2-90 -60 20-06-12 0 10 -30 0 20 30 30 60 90 -6 Power DomiLED with Lens AlInGaP Catalogue-pv4 40 50 0 10 Viewing Angle (Degree) Forward Current; mA 4 20 30 Page 40 5 of 8 50 Forward Current; mA 27/12/2013 V2.0 UNDER DEVELOPMENT DOMINANT Opto Technologies DOMINANT TM AlInGaP Lens Opto Technologies Engineering reference data are not verified. The specifications areWith subject to : DWx-SK3 change without notice. Innovating Illumination DomiLED • AlInGaP With DomiLED Lens : DWx-SK3 Package Outlines Power with Lens – AlInGaP TM Material High brightness surface mount LED. 30 viewing angle. Lead-frame Material Cu Alloy With Ag Plating Small package outline (LxWxH) of 3.6 x 2.8 x 3.5 mm. Superior Package corrosion resistant. High Temperature Resistant Plastic, PPA Qualified according to JEDEC moisture sensitivity Level 2. Compatible to both IR reflow soldering and TTW soldering. Encapsulant Soldering Leads 20-06-12 Silicone resin Sn Plating Power DomiLED with Lens AlInGaP Catalogue-pv4 5 Page 1 of 8 27/12/2013 V2.0 DOMINANT Opto Technologies DOMINANT Innovating Illumination Opto Technologies TM PRELIMINARY AlInGaP With Lens UNDER DEVELOPMENT : DWx-SK3 Engineering reference data are not verified. The specifications are subject to change without notice. Recommended Solder Pad Recommended Solder Pad 20-06-12 6 Power DomiLED with Lens AlInGaP Catalogue-pv4 Page 4 of 8 27/12/2013 V2.0 DOMINANT TM AlInGaP With Lens : DWx-SK3 Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 500 units. • Reel diameter is 180 mm. 7 27/12/2013 V2.0 DOMINANT TM AlInGaP With Lens : DWx-SK3 Opto Technologies Innovating Illumination Packaging Specification 8 27/12/2013 V2.0 DOMINANT TM AlInGaP With Lens : DWx-SK3 Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (500pcs) 0.034 0.034 140 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 7,500 MAX Large 416 x 516 x 476 1.74 96 reels MAX 48,000 MAX 9 27/12/2013 V2.0 DOMINANT TM AlInGaP With Lens : DWx-SK3 Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 10 27/12/2013 V2.0 DOMINANT TM AlInGaP With Lens : DWx-SK3 Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial release 21 Sep 2012 1 Typo error on viewing angle 27 Dec 2013 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 11 27/12/2013 V2.0 DOMINANT TM Opto Technologies AlInGaP With Lens : DWx-SK3 Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM