DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM InGaN Yellow : DWZY-KZKG TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > > High brightness surface mount LED. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Built in ESD protection. Applications: > Automotive: Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated advertising. > Lighting: architecture lighting, general lighting, garden light, channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 31/12/2014 V1.0 DOMINANT TM InGaN Yellow : DWZY-KZKG Opto Technologies Innovating Illumination Optical Characteristics (Tj=25˚C) Part Ordering Number Color DWZY-KZKG-YZ1-1 White Viewing Angle˚ Luminous Intensity @ 60mA IV (mcd) Min. Typ. Max. 2850.0 120 4500.0 5600.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. Electrical Characteristics at Tj=25˚C Part Number Min. (V) DWZY-KZKG 2.90 Vf @ If = 60mA Typ. (V) 3.10 Max. (V) 3.50 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 80 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 120 mA Not designed for reverse bias V ESD threshold (HBM) 4000 V LED junction temperature 150 ˚C Operating temperature -40 … +110 ˚C Storage temperature -40 … +125 ˚C 300 mW 280 K/W 130 K/W Reverse voltage; Ir (max) = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on DOMINANT standard PCB) 2 31/12/2014 V1.0 DOMINANT TM InGaN Yellow : DWZY-KZKG Opto Technologies Innovating Illumination DWZY, Color Grouping Color Bin Structure 0.45 0.44 0.43 0.42 5E 0.41 0.40 0.39 0.38 0.54 0.55 0.56 0.57 0.58 0.59 0.60 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin 5E 1 2 3 4 Cx 0.5536 0.5705 0.5883 0.5764 Cy 0.4221 0.4289 0.4111 0.4075 Dominant color coordinate is measured with an accuracy of ± 0.01. 3 31/12/2014 V1.0 DOMINANT TM InGaN Yellow : DWZY-KZKG Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group Y1 2850.00 ... 3550.00 Y2 3550.00 ... 4500.00 Z1 4500.00 ... 5600.00 Luminous intensity is measured with an accuracy of ± 11%. Vf Bining (Optional) Vf Bin @ 60 mA Forward Voltage (V) V0 2.70 ... 3.00 V1 3.00 ... 3.30 V2 3.30 ... 3.60 Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf bining. 4 31/12/2014 V1.0 DOMINANT TM PRELIMINARY InGaN Yellow : DWZY-KZKG Opto Technologies UNDER DEVELOPMENT DOMINANT Opto Technologies Innovating Illumination 1.4 1.4 1.2 1.2 11 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0 0 0 0 Variables Col_2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 10 20 30 40 50 20 60 80 100 0 40 Forward Forward Current, 0 Current, 100 mAmA 200 300 IF (mA) 20° 10° 50° 0.6 20 60° 0.4 50 30 40 30 2 1.5 1.5 300 11 200 0 10 20 20 40 30 60 40 80 50 100 Forward mAmA4.5 Forward Current, 2.5 3.0 Current; 3.5 4.0 IF (mA) Vf (volts) Color Spectrum Relative Intensity Vs Wavelength 1 Variables 0.9 Col_2 0.8 0.7 0.6 0.5 0.4 0.3 0.2 20 70° 10 0.2 10 0.1 0 80° 0 2 400 00 2.0 Rja=280K/W 60 2.5 400 0.8 40 3 500 2.5 0 Relative Intensity ForwardCurrent Current,(mA) mA Forward 80 50 40° 70 3 100 0 0° 1.0 Col_2 3.5 If (m A) 60 90 Variable 0.5 0.5 Radiation pattern. Maximum Current Vs Vs Ambient AmbientTemperature Temperature Max Current 30° 4 3.5 Forward voltage vs. forward current Forward Voltage; V Forward Voltage; V Relative intensity vs. forward current If (mA) 1.6 1.6 IV Normalized @ 150 mA Relative at 30mA 60mA Relative Intensity, Intensity; Normalized Normalized at Engineering reference data are not verified. The specifications areVs subject to Current RelativeFlux Intensity VsForward Forward Current Forward Voltage VsForward Forward Current Forward Voltage Relative Intensity Vs Current Vs Forward Current VF Vs Forward Current change without notice. 0 0 10 20 30 40 50 60 70 80 90 0 100 110 120 400 90° 0 10 20 30 40 50 60 70 80 90 100 110 450 500 550 600 650 700 Wavelength, nm Ambient Temperature Ambient Temperature, °C Col_1 Max Current vs. Ambient Temperature Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 0 90° 06/12/12 5 Primax 150 InGaN Yellow NAZY-BHG -pv4 31/12/2014 V1.0 Page 6 of 9 UNDER DEVELOPMENT DOMINANT Opto Technologies DOMINANT TM InGaN Yellow : DWZY-KZKG Opto Technologies Engineering reference data are not verified. The specifications are subject to Innovating Illumination change without notice. Power DomiLED • InGaN Yellow : DWZY-KZKG Package Outlines TM Power DomiLED InGaN Yellow – DWZY-KZKG Material Material High brightness surface mount LED for automotive exterior applications. Lead-frame Cu Alloy With Au Plating 120 viewing angle. Temperature Package Small package outline (LxWxH) of 2.8 x 3.2 High x 1.8 mm. Resistant Plastic, PPA Encapsulant Qualified according to JEDEC moisture sensitivity Level 2. Silicone Resin Compatible to both IR reflow soldering and TTW soldering. Soldering Leads Au Plating Superior corrosion resistant. Built-in ESD protection. 6 31/12/2014 V1.0 DOMINANT TM InGaN Yellow : DWZY-KZKG Opto Technologies Innovating Illumination Recommended Solder Pad 7 31/12/2014 V1.0 DOMINANT Opto Technologies DOMINANT Engineering reference data are not verified. The specifications are subject to TM Opto Technologies change without notice. Innovating Illumination Taping and orientation Taping And Orientation. • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. InGaN Yellow : DWZY-KZKG Reels come in quantity of 2000 units. Reel diameter is 180 mm. 8 20/05/14 PowerDomiLED DWZY-KZKG -InGaN- Catalogue-pv1.docx 31/12/2014 V1.0 Page 6 of 8 DOMINANT TM InGaN Yellow : DWZY-KZKG Opto Technologies Innovating Illumination Packaging Specification 9 31/12/2014 V1.0 DOMINANT TM InGaN Yellow : DWZY-KZKG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 10 31/12/2014 V1.0 DOMINANT TM InGaN Yellow : DWZY-KZKG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020D) 300 Min 260˚C Min 30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-120s 50 25 480s max 0 50 100 150 200 Time (sec) 11 31/12/2014 V1.0 DOMINANT TM InGaN Yellow : DWZY-KZKG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 31 Dec 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 12 31/12/2014 V1.0 DOMINANT TM Opto Technologies InGaN Yellow : DWZY-KZKG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM