DIGITRON SEMICONDUCTORS BYV95 & BYV96 SERIES FAST RECOVERY RECTIFIERS MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Symbol BYV95A BYV95B BYV95C BYV96D BYV96E Units Maximum recurrent peak reverse voltage Parameter VRRM 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 200 400 600 800 1000 Volts Minimum avalanche breakdown voltage @ 100µA V(BR) 300 500 700 900 1100 Volts Maximum average forward rectified current 0.375” lead length at TA = 55°C I(AV) 1.5 Amps Peak forward surge current, 10ms single half sine-wave superimposed on rated load @ TJ = 165° IFSM 35.0 Amps VF 1.6 1.35 Volts IR(AV) 1.0 150.0 µA Maximum DC reverse current at rated DC blocking voltage IR 2.0 µA Maximum reverse recovery time trr Maximum instantaneous forward voltage @1.5A TJ = 25°C TJ = 165°C Maximum full load reverse current full cycle average, 0.375” lead length at TJ = 25°C TJ = 165°C Typical junction capacitance Typical thermal resistance (1) (2) (3) Operating junction temperature range Storage temperature range 1. 2. 3. 250 300 CJ 10.0 pF RθJA 55.0 °C/W TJ -65 to +175 °C Tstg -65 to +200 °C Measure with IF = 0.5A, IR = 1.0A, Irr = 0.25A Measured at 1.0 MHz and applied reverse voltage of 4.0Volts Thermal resistance from junction to ambient at 0.375” lead length, PC board mounted MECHANICAL CHARACTERISTICS Case SOD-57 Marking Body painted, alpha-numeric Polarity Cathode band 144 Market Street Kenilworth NJ 07033 USA ns phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20121214 DIGITRON SEMICONDUCTORS BYV95 & BYV96 SERIES FAST RECOVERY RECTIFIERS Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. 144 Market Street Kenilworth NJ 07033 USA phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20121214