MASWSS0148 GaAs SPST High Isolation Terminated Switch 0.3 - 4.0 GHz Schematic with Off-Chip Components 2 Features • • • • • • • • • Rev. V1 High Isolation: 55 dB @ 2 GHz Insertion Loss: 1.6 dB @ 2 GHz Terminated RF Input in Isolation State Single Positive Control CMOS Compatible Logic Lead-Free 3 mm 12-Lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible RFin CBlock 10 K VDD VCTRL 1 CBypass Description 50 M/A-COM’s MASWSS0148 is a GaAs monolithic single pole single throw (SPST) terminated switch in a lead-free 3 mm 12-lead PQFN plastic package. The MASWSS0148 is ideally suited for use where low power consumption, small size and high isolation are required. Typical applications include PCS and GSM LO switching, switch matrices and switched filter banks in systems such as radio and cellular equipment. The MASWSS0148 is fabricated using a mature 1micron gate length GaAs MESFET process. The process features full chip passivation for increased performance and reliability. CBlock RFout 2. VDD can be injected at either pin 5 or pin 11. Pin Configuration Pin No. Function Pin No. Function 1 No Connection 7 No Connection 2 No Connection 8 No Connection 3 No Connection 9 VCTRL 4 No Connection 10 No Connection 5 RF Output 11 RF Input 6 No Connection 12 No Connection 13 Paddle3 Ordering Information1 Part Number Package MASWSS0148TR-3000 3000 piece reel MASWSS0148SMB Sample Test Board 1. Reference Application Note M513 for reel size information. 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. Absolute Maximum Ratings 4,5 Parameter Absolute Maximum Input Power 23 dBm (VDD = VCTRL = 5 V) Operating Voltage (VDD, VCTRL) 8.5 V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +125°C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. M/A-COM does not recommend sustained operation near these survivability limits. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0148 GaAs SPST High Isolation Terminated Switch 0.3 - 4.0 GHz Rev. V1 Electrical Specifications: TA = 25°C, VDD = 5 V, VCTRL = 0 / 5 V, 100 pF capacitors, Z0 = 50 Ω 6 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss7 0.3 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz dB dB dB dB — — — — 1.5 1.6 1.7 1.75 1.7 — — — Isolation 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz dB dB dB dB 50 — — — 55 55 48 40 — — — — Return Loss Insertion Loss State, 0.3 - 4.0 GHz dB — 17 — Input Return Loss Isolation State dB — 20 — Input 1 dB Compression — dBm — 27 — Trise, Tfall 10% to 90% RF 90% to 10% RF µS µS — — 3 0.3 — — Ton, Toff 50% Control to 90% RF 50% Control to 10% RF µS µS — — 3.5 0.4 — — Transients In-Band mV — 20 — Input IP2 2-Tone, 5 MHz spacing, +10 dBm / tone dBm — 72 — Input IP3 2-Tone, 5 MHz spacing, +10 dBm / tone dBm — 49 — Current (ICTRL) Input Power = 10 dBm µA — 1 6 Current (IDD) Input Power = 10 dBm µA — 1 6 6. For positive voltage control, external DC blocking capacitors are required on all RF ports. 7. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 300 MHz - 1 GHz, 39 pF for 0.5 GHz - 4 GHz. Truth Table 8,9 Handling Procedures VCTRL RFin RFout 0 50 Ω Termination Open 1 RFout RFin 8. Differential voltage, V(state 1) - V(state 0), must be +2.5 V minimum and must not exceed 8.5 V. 9. 0 = 0 V ± 0.2 V, 1 = VDD = 2.5 V to 8.5 V Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0148 GaAs SPST High Isolation Terminated Switch 0.3 - 4.0 GHz Rev. V1 Typical Performance Curves (VDD = 5 V, VCTRL = 0 / 5 V, 100 pF capacitors) Insertion Loss Isolation 2.5 70 2.0 60 1.5 50 1.0 40 +25°C +85°C -40°C 0.5 +25°C +85°C -40°C 30 20 0.0 0 1 2 3 4 0 1 Frequency (GHz) 2 3 4 Frequency (GHz) Return Loss (Insertion Loss State) Input Return Loss (Isolation State) 0 0 +25°C +85°C -40°C +25°C +85°C -40°C 10 10 20 20 30 30 40 0 1 2 3 4 40 0 1 3 4 P0.1dB P1dB 30 30 25 25 20 20 15 15 0.5 GHz 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz 10 5 0 2.0 2 Frequency (GHz) Frequency (GHz) 2.5 3.0 3.5 V DD =V CTRL 4.0 (V) 4.5 10 0.5 GHz 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz 5 5.0 0 2.0 2.5 3.0 3.5 V DD =V CTRL 4.0 4.5 5.0 (V) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0148 GaAs SPST High Isolation Terminated Switch 0.3 - 4.0 GHz Rev. V1 Typical Performance Curves (VDD = 5 V, VCTRL = 0 / 5 V, 100 pF capacitors) IP3 60 0.5 GHz 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz 50 40 30 20 2.0 2.5 3.0 3.5 V DD =V CTRL 4.0 4.5 5.0 (V) Lead-Free 3 mm 12-Lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.