MMIC SP4T RF Switch HSWA4-63DR+ Absorptive RF Switch with internal driver Single Supply Voltage, +2.3V to +5.5V The Big Deal • • • • • High Isolation, 61 dB @ 0.9 GHz Low insertion loss, 0.9 dB at 0.9 GHz High IP3, +58 dBm Fast switching, 255ns Low current consumption, 110µA CASE STYLE: DG984-1 Product Overview Mini-Circuits’ HSWA4-63DR+ is a MMIC SP4T absorptive switch with an internal driver designed for wideband operation from 30 MHz to 6 GHz, supporting many applications requiring high performance across a wide frequency range. This model provides excellent isolation, fast switching speed and high linearity in a tiny 4x4mm 24-Lead MCLP package. Produced using a unique CMOS process on silicon, it offers the performance of GaAs with the advantages of conventional CMOS devices. HSWA4-63DR+ provides a high level of ESD protection, MSL1 moisture sensitivity rating, and excellent repeatability. Key Features Feature Advantages Wideband, 30 MHz to 6.0 GHz One model can be used in many applications, saving component count. Also ideal for wideband applications such as military and instrumentation. Absorptive switch In the off condition, RF output ports which are not switched ON are terminated into 50Ω. This enables proper impedance termination of the circuitry following the RF output ports, preventing any unintended action such as oscillation. High Isolation: • 61 dB at 0.9 GHz • 32 dB at 6 GHz High isolation significantly reduces leakage of power into OFF ports. High linearity • +58 dBm IIP3 • +97 dBm IIP2 at 1.9 GHz High linearity minimizes unwanted intermodulation products which are difficult or impossible to filter in multi-carrier environments such as CATV, or in the presence of strong interfering signal from adjacent circuitry or received by antenna. Built-in negative voltage generator Operates with single positive supply voltage; no need for DC blocking capacitors, unless external DC is present at the RF ports. Built-in CMOS driver No need for external driver, saving PCB space and cost. Wide Supply Voltage and low current +2.3 to 5.5V and 110µA typ. Ideal for battery operated systems consuming very low current for long battery life. Tiny size, 4 x 4mm QFN package Tiny footprint saves space in dense layouts while providing low inductance, repeatable transitions, and excellent thermal contact to the PCB. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 5 MMIC SP4T RF Switch 50Ω 30MHz - 6 GHz Absorptive RF Switch with internal driver Single Supply Voltage, +2.3V to +5.5V Product Features • High Isolation, 61 dB typ. at 0.9 GHz • Low insertion loss, 0.9 dB typ. at 0.9 GHz • High IP3, 58 dBm typ. • Fast switching time, 255 ns typ. • Low current consumption, 110 µA typ. HSWA4-63DR+ CASE STYLE: DG984-1 Typical Applications +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications • Defense • Test and Measurements • Switch matrices General Description HSWA4-63DR+ is a high isolation absorptive SP4T switch with integral CMOS driver, operates with single positive supply voltage while consuming, 110 µA typical. It has been designed for very wideband operation. It is packaged in a tiny 4 x 4 x 0.9 mm 24-lead package and is rated MSL1. Simplified Schematic and Pad Description Function Pad Number RF COM 22 RF common/ SUM port* RF1 14 RF OUT #1/Input #1* RF2 11 RF OUT #2/Input #2* RF3 8 RF-OUT #3 /Input #3* RF4 5 RF-OUT #4 /Input #4* Control 1 17 CMOS Control IN #1 Control 2 18 CMOS Control IN #2 Control 3 19 CMOS Control IN #3 VDD 16 Supply voltage Description 1-4, 6,9,10,12,13,15 Notes GND RF ground A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. 20,21,23,24 B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. *Must be held at 0VDC. If required add DC blocking capacitors on these C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and ports. conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. OR M161993 HSWA4-63DR+ RS/CP 170515 Page 2 of 5 HSWA4-63DR+ SP4T RF Switch RF Electrical Specifications1, 30 MHz - 6 GHz, TAMB=25°C, VDD= +3.3V Parameter Condition (MHz) Min. 30 - 900 30 — Frequency range Insertion loss2 Isolation between Common port and output ports Isolation among output ports Return loss (ON STATE) Return loss (OFF STATE) Typ. Max. Units MHz 0.9 6000 1.1 900 - 2100 — 1.1 1.35 2100 - 2700 — 1.15 1.4 2700 - 4000 — 1.25 1.5 4000 - 6000 — 1.9 2.5 30 - 900 55 61 — 900 - 2100 52 55 — 2100 - 2700 50 52 — 2700 - 4000 42 43 — 4000 - 6000 27 32 — 30 - 900 56 61 — 900 - 2100 51 54 — 2100 - 2700 50 52 — 2700 - 4000 41 44 — 4000 - 6000 29 32 — 30 - 4000 — 17 — 4000 - 6000 — 12 — 30 - 4000 — 22 — 4000 - 6000 — 19 — 97 dB dB dB dB dB Input IP2 1900 Input IP3 1900 — 58 — dBm dBm 0.1 dB Input compression3 900 — 35 — dBm RF Input operating power, CW 30 - 6000 — — 33 dBm RF input power into terminated output ports, CW 30 - 6000 — — 24 dBm DC Electrical Specifications Parameter Min. Supply voltage, VDD Typ. Max. 2.3 5.5 Supply current 110 Units V µA Control voltage Low -0.3 0.6 Control voltage High 1.17 3.6 V 1 µA Control current V Notes: 1. Tested on Mini-Circuits’ test board TB-927+, using Agilent’s N5230A network analyzer (see Characterization test circuit, Fig.1). 2. Insertion loss values are de-embedded from test board loss. 3. Do not exceed RF input power as shown in Absolute Maximum Ratings table. Switching Specifications Parameter Condition Switching time 50% control to 90/10% RF Video feed-through Rise/Fall time 10% to 90% or 90% to 10% fFR=50 MHz fctrl =50 KHz Vctrl High=3.3V Vctrl Low=0V Min. Typ. Max. Units 255 330 nS 14 mVP-P 100 nS Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 5 HSWA4-63DR+ SP4T RF Switch Absolute Maximum Ratings5 Parameter Ratings Operating temperature -40°C to +105°C Storage temperature -65°C to 150°C VDD, Supply voltage -0.3 to 5.5V Voltage control -0.3V Min. 3.6 Max. RF Input power, CW 34 dBm 5. Operation of this device above any of these conditions may cause permanent damage. 6 Truth Table- 3 Pin Control Truth Table- 2 Pin Control State of Control Voltage Mode Control 2 Control 1 RF COM-RF1 ON Low High RF COM-RF2 ON High Low RF COM-RF3 ON High High RF COM-RF4 ON Low Low State of Control Voltage Control 3 Control 2 Control 1 Low Low High Low High Low Low High High High Low Low RF COM-RF4 ON Low Low Low All off High Low High All off High High Low Unsupported High High High Mode RF COM-RF1 ON RF COM-RF2 ON RF COM-RF3 ON 6. Pad 19= control 3 must be grounded. Characterization Test Application Circuit TB-927+ Component Value Size DUT HSWA4-63DR+ 4x4 mm C2, C3, C4, C5 100pF C6 1uF R1, R2, R3, R5, R7, R9 0 Ohm R4, R6, R8 1 MOhm 0402 Figure 1. Block Diagram of test Circuit used for characterization (DUT soldered on Mini-Circuit’s TB-927+) Parameter Conditions VDD=+2.3V and 5.5V Control= 0V and 3.3V Insertion loss, Isolation, Return loss and DC current Pin=0 dBm Switching time and DC Current Input IP3 RF frequency: 50 MHz at 0 dBm, Control frequency: 50 KHz +15 dBm / tone Compression — Test Equipment Keysight N5242A Network Analyzer, E3631A power supply. Cblock: Internal to network Analyzer. Keysight 54832B oscilloscope, 81110A pulse generator and E3631A power supply Keysight ES257D signal generators, E4416A power meter, N9020A Signal analyzer and E3631A power supply Keysight N5242A Network Analyzer, E3631A power supply Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 4 of 5 HSWA4-63DR+ SP4T RF Switch Product Marking 24 1 MCL HSWA4 Additional Detailed Technical Information additional information is available on our dash board. To access this information click Performance Data here Data Table Swept Graphs Case Style DG984-1 Plastic package: exposed paddle Tape & Reel F68 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 and 3000 devices Suggested Layout for PCB Design PL-514 Evaluation Board TB-927+ Environmental Ratings ENV84 Termination finish: NiPdAu ESD Rating Human Body Model (HBM): Class 2 (Pass 2000V) in accordance with MIL-STD-883, Method 3015 Charge Device Model (CDM): Class C1 (Pass 250V) in accordance with JESD22-C101 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 5 of 5