DB Lectro BTP-99WHCT-G6-H/W Prolite 1w smd star Datasheet

ProLite 1W SMD Star
BTP-99XXCT-XX-X/W
Package Dimension
Features
Highest Lumen Per Watt
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Long Operational Life
White Housing
Superior ESD Protection
Instant Light (less than 100ns)
Compatible to Luxeon’s “Lambertian”
True SMD Emitter
Note: Lens is low dome profile
Tolerance:
± see spec
Unit: mm
Applications
Accent Light/Down Light/Spot Light
Automotive Exterior/Interior Light
Large Area LCD Backlights
Marine/Miner’s Lighting
Portable Flashlight/ General Lighting
ƒ
ƒ
ƒ
ƒ
ƒ
Optical Characteristics at TJ=25ºC, IF=350mA
PART NUMBER
Emitting
Color
LED Chip
Material
Lens
Color
Wavelength (nm)
CCT (K) Range
Drive
Luminous
VIEW
Voltage
Flux (lm)
ANGLE
@ 350mA
@350mA
2θ1/2
Typ.
(deg)
Min
Max
Typ.
Water Clear
620
635
2.40V
30 lm
Water Clear
610
620
2.40V
36 lm
Yellow
Water Clear
585
595
2.40V
30 lm
BTP-99BLCT-XX-X/W
Blue
Water Clear
460
475
3.50V
10 lm
BTP-99PGCT-XX-X/W
Green
Water Clear
520
540
3.50V
30 lm
Water Clear
2800K
3800K
3.50V
20 lm
Water Clear
5000K
8000K
3.50V
25 lm
BTP-99NRCT-XX-X/W
Normal Red
BTP-99AMCT-XX-X/W
Amber
BTP-99YECT-XX-X/W
BTP-99WWCT-XX-X/W
Warm White
BTP-99WHCT-XX-X/W
White
AlInGaP
AlInGaN
140
Notes:
1)
Picture for illustration purpose only.
Please refer to outline dimension for actual package size.
2)
Flux is measured with the accuracy of ±15%. Please refer to Flux Selection Guide
3)
CCT is measured with the accuracy of ± 400K. Please refer to CCT Selection Guide
4)
VF is measured with the accuracy of ± 0.15V. Please refer to VF Selection Guide
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 1 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
ProLite 1W SMD Star
BTP-99XXCT-XX-X/W
Absolute Maximum Ratings at TJ=25ºC
Parameter
Red/Amber/Yellow
White/Blue/Green
1.00
1.22
350
350
500
500
Average Forward Current (mA)
350
350
Reverse Voltage (V)
5
5
Reverse Current (uA)
50
50
16,000
16,000
120
135
Thermal Resistance Junction to Board (°C/W)
15
15
Temperature Coefficient of VF (mV/°C)
-2
-2
Storage Temperature (°C)
-40 to +105
-40 to +105
Operating Temperature (°C)
-40 to +105
-40 to +105
Power Dissipation (W)
[1]
DC Forward Current (mA)
Peak Pulsed Forward Current (mA)
[4]
ESD Sensitivity (V) [2]
LED Junction Temperature at 350mA (°C)
[3]
Lead Soldering Temperature (°C)[4]
260°C for 5 seconds max 260°C for 5 seconds max
Application Notes:
1.
Proper forward current must be observed to maintain the junction temperature below maximum
rating
2.
Although all products listed are class two ESD protection (+/- 16KV by HBM mode), care must be
fully taken when handling products
3.
Specification is subjected to change for improvements without notice.
4.
Test conditions: tp≤10us, duty cycle = 0.005
5.
CAUTION: When lighting up, the emitter will become very hot if it is not attached to a heat sink.
Please provide proper heat management to prevent damage to the emitter.
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 2 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
ProLite 1W SMD Star
BTP-99XXCT-XX-X/W
CCT, Flux and VF Selection Guide (@ TJ = 25ºC, IF=350mA)
BTP-99XXCT-XX-X/W
White Housing
Wavelength Ranks Selection
Color
Blue
Green
Red
Amber
Yellow
Bin
B5
B6
B7
XX
G6
G7
G8
G9
XX
XX
XX
XX
Flux Ranks Selection
λD(nm)
Min
Max
460
465
465
470
470
475
460 – 475
515
520
520
525
525
530
530
535
515 – 535
620 – 630
610 – 620
585 – 595
CCT Ranks Selection
Color
Temp
Warm
White
White
Bin
00
01
XX
02
03
04
XX
Color
Blue
Red
Amber
Yellow
Green
White
Bin
Flux (lumens)
H
4.5~6
J
6~8
K
8~10
X
Default Full Range
M
14~18
N
18~23
P
23~30
Q
30~39
R
39~50
X
Default Full Range
VF Ranks Selection
CCT(K)
Min
Max
2800
3300
3300
3800
2800K – 3800K
5000
6000
6000
7000
7000
8000
5000K – 8000K
Color
Red
Amber
Yellow
White
Blue
Green
Bin
VF (V)
Min
Max
V04
V05
V06
V07
VXX(Full)
V08
V09
V10
V11
V12
VXX(Full)
2.0
2.2
2.2
2.4
2.4
2.6
2.6
2.8
2.0~2.8
2.8
3.0
3.0
3.2
3.2
3.4
3.4
3.6
3.6
3.8
2.8~3.8
(Please specify on order, otherwise, default full range of VF)
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 3 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
ProLite 1W SMD Star
BTP-99XXCT-XX-X/W
Typical Radiation Pattern
R e la t iv e I n t e n s it y (% )
100
90
80
70
60
50
40
30
20
10
0
-100
-80
-60
-40
-20
0
20
40
60
80
100
Angular Displacement(Degree)
Fig. 1 Typical Radiation Pattern
Operating Current & Ambient Temperature
2a.
2b.
Fig. 2 Forward Current vs Ambient Temperature
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 4 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
ProLite 1W SMD Star
BTP-99XXCT-XX-X/W
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 5 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
ProLite 1W SMD Star
BTP-99XXCT-XX-X/W
Light Output & Junction Temperature
Fig. 5a Relative Light Output vs Junction Temperature
Fig. 5b Relative Light Output vs Junction Temperature
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 6 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
ProLite 1W SMD Star
BTP-99XXCT-XX-X/W
Wavelength Characteristics, TJ = 25ºC
Fig. 6a Relative Intensity vs Wavelength
White Color Spectrum, TJ = 25ºC
Fig. 6b White Color Spectrum (Typ 5500K)
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Fig. 6c Warm White Color Spectrum (Typ 3300K)
Page 7 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
ProLite 1W SMD Star
BTP-99XXCT-XX-X/W
Other Important Notes
z
The information contained herein is presented only as a Guide for the application of our
products. Brilliance Technologies assumes no responsibility for any infringement of intellectual
property or other rights of the third parties which may result from its use.
z
Brilliance Technologies continually improves the quality of our products. Nevertheless,
semiconductor devices in general can malfunction or fail due to their inherent electrical
sensitivity and vulnerability to physical stress.
It is the responsible of the customer, when
using Brilliance Technologies products, to comply with the standard of safety in making a safe
design for the entire system, and to avoid situations in which a malfunction or failure of such
Brilliance Technologies products cause loss of human life, bodily injury or damage to property.
z
Brilliance Technologies products listed in this data sheet are intended for usage in general
electronics and/or non-commercial or industrial lighting products. These products are neither
intended nor warranted for usage in equipment that requires extraordinarily high quality and/or
reliability or a malfunction or failure of which may cause loss of human life or bodily injury.
z
In developing your design, please ensure that Brilliance Technologies products are used within
specified operating ranges as set forth in the most recent Brilliance Technologies data sheets.
BT-Rev. 1.0A20041217
Specifications are subject to change for improvement without notice.
Copyright © 2003 Brilliance Technologies Co., Ltd. All rights reserved.
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 8 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
Similar pages